Bike Test Question
Discussion
I've got another day's training before my Mod 1 on Thursday.
One question I forgot to ask my instructor yesterday was- does it matter which foot goes down first in a stop situation (normal / 'controlled' stop or emergency brake)?
I know the 'safety position' is left foot down with the right foot applying the rear brake so I imagine that left foot down first is preferred.
The reason I ask is that I may stop short having not satisfied myself that I have put the bike into 1st which means I sometimes put my right foot down first while my left is assuring me that 1st is selected. Also if you aren't absolutely straight, stopping while using primarily the front brake can cause the bike to overbalance away from the curb, again necessitating right foot.
One question I forgot to ask my instructor yesterday was- does it matter which foot goes down first in a stop situation (normal / 'controlled' stop or emergency brake)?
I know the 'safety position' is left foot down with the right foot applying the rear brake so I imagine that left foot down first is preferred.
The reason I ask is that I may stop short having not satisfied myself that I have put the bike into 1st which means I sometimes put my right foot down first while my left is assuring me that 1st is selected. Also if you aren't absolutely straight, stopping while using primarily the front brake can cause the bike to overbalance away from the curb, again necessitating right foot.
Just never go above second, in the Mod 1 there is no need. That way you just need one solid downshift and you'll be in first. Don't worry about it during the Emergency stop. The controlled stop, and the hazard avoidance just require you to come to a halt in control and in the correct place, whilst i did go down to first prior to stopping i'm not sure it's a requirement.
Chongwong said:
Just never go above second, in the Mod 1 there is no need. That way you just need one solid downshift and you'll be in first. Don't worry about it during the Emergency stop. The controlled stop, and the hazard avoidance just require you to come to a halt in control and in the correct place, whilst i did go down to first prior to stopping i'm not sure it's a requirement.
Stopping, I was taught to pop it into third gear to ensure maintain speed through the speed trap, roll off, and squeeze the front brake in a 1-2-3-4 motion bringing it to a controlled stop using the back brake in the last few mph, and changing down before you get there as part of engine braking. Same for emergency stop, just no gear changing or using engine braking. If you stall it in the emergency stop it does not matter, if you use full ABS then brilliant + thumbs up from the instructor - just stop safely and quickly.
In whatever context you need to ensure you life saver over both shoulders before pulling away.
I remember on my Mod 1 the instructor telling me he'd never seen someone set such a fast speed through the speed trap for emergency braking. Was 80+ iirc.
He chastised me briefly, then commented that at least I knew how the throttle worked and wasn't afraid to haul up on the brakes.
Good luck!
He chastised me briefly, then commented that at least I knew how the throttle worked and wasn't afraid to haul up on the brakes.
Good luck!
Beginning to wonder how much practice I'm likely to get on all this tomorrow, so far I've only practiced handling the 600 and done the slalom, figure 8, slow ride and U-turn on a 125. I haven't seen the swerve test setup or the 'fast' circuit ride bit.
Thanks for the good luck messages folks
Thanks for the good luck messages folks
2wheelsjimmy said:
I remember on my Mod 1 the instructor telling me he'd never seen someone set such a fast speed through the speed trap for emergency braking. Was 80+ iirc.
He chastised me briefly, then commented that at least I knew how the throttle worked and wasn't afraid to haul up on the brakes.
Good luck!
He chastised me briefly, then commented that at least I knew how the throttle worked and wasn't afraid to haul up on the brakes.
Good luck!




80 plus in that compound, come on now.HustleRussell said:
moanthebairns said:




80 plus in that compound, come on now.I actually looked at doing my mod 1 for a laugh a few weeks ago to see how piss easy it would be now but you cant do it with a full licence, its only £15. Even on the blade and years of riding on the roads and track i'd struggle to get 80mph + on the local compound. Now I'm not sure they are all the same size but where I did it, it wasn't that big a compound to do they speeds, especially on the s
te learners get, can't see a er5 doing that. moanthebairns said:
HustleRussell said:
moanthebairns said:




80 plus in that compound, come on now.I actually looked at doing my mod 1 for a laugh a few weeks ago to see how piss easy it would be now but you cant do it with a full licence, its only £15. Even on the blade and years of riding on the roads and track i'd struggle to get 80mph + on the local compound. Now I'm not sure they are all the same size but where I did it, it wasn't that big a compound to do they speeds, especially on the s
te learners get, can't see a er5 doing that. andburg said:
Another to add just do the stop in 2nd, left foot down. Once you've stopped swap feet to select first and swap back before making a normal take off.
It's not time limited so don't comment locate things by trying to select first while braking.
That's assuming you have a wonderful bike that doesn't then want to not change into first after you've gone through neutral and you have to faff about rolling it a bit to get into first. I had a bike that did that when hot, even with the chain bang on.It's not time limited so don't comment locate things by trying to select first while braking.
I'd recommend always rolling to a stop in first keeping an eye on your neutral light just in case.. Left foot down. No Hendon shuffle. Makes you look poorly prepared. Just keep clicking down if you can't remember which gear you're in. You'll always get there in the end.
Stopping to a halt in second leaves you in a position where you're not ready to pull away immediately without faffing about.
Edited by TimmyMallett on Tuesday 20th June 11:19
Edited by TimmyMallett on Tuesday 20th June 11:21
HustleRussell said:
moanthebairns said:
HustleRussell said:
moanthebairns said:




80 plus in that compound, come on now.I actually looked at doing my mod 1 for a laugh a few weeks ago to see how piss easy it would be now but you cant do it with a full licence, its only £15. Even on the blade and years of riding on the roads and track i'd struggle to get 80mph + on the local compound. Now I'm not sure they are all the same size but where I did it, it wasn't that big a compound to do they speeds, especially on the s
te learners get, can't see a er5 doing that. Gassing Station | Biker Banter | Top of Page | What's New | My Stuff



