Battery issue
Author
Discussion

CaptainSlow

Original Poster:

13,179 posts

243 months

Tuesday 20th June 2017
quotequote all
A strange one so any help appreciated.

Used by 2007 Triumph Sprint yesterday with no issues, was a very hot day. Got the bike out the garage this morning and no response from the key fob, changed the battery and no joy...same with the spare so gave up and used the spare bike.

This evening I got the multimeter out and the battery was reading 2.8v! how on earth can is be down that low?

eta battery 15 months old

Edited by CaptainSlow on Tuesday 20th June 20:33

nervous

24,050 posts

261 months

Tuesday 20th June 2017
quotequote all
Was the fan running somehow?

Garybee

453 posts

197 months

Tuesday 20th June 2017
quotequote all
Either:-

1) Battery had enough juice to start bike. Whilst riding, the battery failed (has it boiled dry or something obvious?) which you wouldn't notice as you're running off the alternator. Bike will run fine once started so you wouldn't notice anything when you stopped and parked up.

2) current draw that continued after you stopped the bike. Battery drawn down to very low voltage by something staying live.

CaptainSlow

Original Poster:

13,179 posts

243 months

Tuesday 20th June 2017
quotequote all
It may have been the fan but I didn't hear it. The battery is a sealed type so can't see if dry. I have the old battery still so am charging that up and I'll try and put it on tomorrow.

tivver500

376 posts

301 months

Thursday 22nd June 2017
quotequote all
Triumph Sprint's (I had one) are very particular to batteries....
Mine dies and was replaced with a new Yuasa which(only just) started the bike - but didn't give me any confidence...
I then fitted a Motobat (after topping up the dry charge overnight) and the bike was back to normal - spinning over without any hesitation.
Unfortunately it was written off in a 'smidsy' with my son riding about a month later frown.

CaptainSlow

Original Poster:

13,179 posts

243 months

Thursday 22nd June 2017
quotequote all
Thanks, the saga continues.

I put an older battery on it and whist it didn't start the indicators stayed on. A thread on another forum suggested this could be a knackered datatool so I've spent this evening putting the blanking plug on. I've now got all the dash to work and the indicators off but still no start. I've got a Yuasa on order and currently charging up the motobatt. As soon as it's fixed I'm getting rid.

eta, I just get a click when pressing the starter.

crofty1984

17,064 posts

235 months

Thursday 22nd June 2017
quotequote all
Can you jump lead it to a car battery?

CaptainSlow

Original Poster:

13,179 posts

243 months

Thursday 22nd June 2017
quotequote all
I'll have a go at the weekend. The new battery should have arrived by then.

Also having car issues!!

CaptainSlow

Original Poster:

13,179 posts

243 months

Friday 23rd June 2017
quotequote all
So a night on the optimate and the bike started ok. Next check will be if it's possible to revive a motobatt from near death as it was reading 2.8v at one point.

I still don't know for certain what the initial cause was but I'm glad I've blanked off the immobiliser/alarm as that was a pita anyway.

I'm planning on a trip to Wales next month and after that I'm selling up.