"Ticking" from front brake
"Ticking" from front brake
Author
Discussion

sosidge

Original Poster:

700 posts

246 months

Wednesday 21st June 2017
quotequote all
I've noticed a high speed "ticking" from the front brake on my Forza 125.

I've only noticed it since washing it a couple of weeks ago (but I can't be certain that it wasn't making the noise before). Just washed with a brush, soapy water and a standard hose.

It is quite a high frequency sound - much faster than one per rotation.

No obvious visual issues with the brake and the bike stops well.

I think it may be related to the ABS system, or perhaps the drilled discs. Perhaps I washed a bit of the anti-seize grease away?

anonymous-user

85 months

Wednesday 21st June 2017
quotequote all
Have you washed it a bit too vigorously and washed the grease out of the bearings?

cmaguire

3,589 posts

140 months

Wednesday 21st June 2017
quotequote all
ABS sensor has been nudged and is touching the ridges on the disc?

sosidge

Original Poster:

700 posts

246 months

Wednesday 21st June 2017
quotequote all
I didn't wash it vigourously which is why it is a surprise that it has started to make a noise.

JimbobVFR

2,822 posts

175 months

Wednesday 21st June 2017
quotequote all
Can you get the front wheel off the ground and give it a spin, if you can hear it then it might help trace where it's coming from.

Jazoli

9,707 posts

281 months

Wednesday 21st June 2017
quotequote all
If you have no front paddock stand grab a mate, stand on the left of the bike whilst its on its sidestand, turn the bars all the way to the right, hold the right bar and pull it towards you, using your hip to lean the bike on, this will lift the front wheel off the ground, then get your mate to spin the wheel and have a good look listen, or get your mate to lift the bike and spin/look/listen yourself.

This technique will work on any bike, I've done it on 250kg ZZR1100's, it will be a doddle on a little 125 smile

Edited by Jazoli on Wednesday 21st June 14:25

sosidge

Original Poster:

700 posts

246 months

Tuesday 27th June 2017
quotequote all
It seems that posting this question has caused the sound to fade away...

I'm going to assume that I knocked a tiny bit of debris down between the pad and disc when I was washing it, and that this has now worn away.

Thanks for the help.

Fleegle

16,710 posts

207 months

Wednesday 28th June 2017
quotequote all


It's the caliper bolts undoing themselves

graham22

3,328 posts

236 months

Wednesday 28th June 2017
quotequote all
Fleegle said:
It's the caliper bolts undoing themselves
My mates Ducati 748 did that, happened when his wife was riding it - much merriment was had. They got divorced.