Kawasaki GPZ600R rebuild.
Kawasaki GPZ600R rebuild.
Author
Discussion

Speed addicted

Original Poster:

6,336 posts

258 months

Monday 26th June 2017
quotequote all
I'm currently working my way through my 1985 Kawasaki GPZ600R, so far I've sorted out the brakes, electrics and repainted an awful lot of stuff.
I'm hoping to get the bike on the road next month (I'm on an oil rig for the next 3 weeks) and will need to fit a newer exhaust and oil cooler as well as getting the fairings resprayed and changing the tyres,

The chain on the bike is probably at least 20 years old, but appears to be in good condition, there's no corrosion and it moves freely.

I'm tempted to change it simply because the consequence of a chain failing can be pretty severe, but I'm not sure if it needs to be changed at all.

Also it looks like I might be able to buy seat covers in the correct red, rather than settling for black. Is recovering a seat as easy as it looks or a dark art?

I'll post a couple of pictures of current progress tonight.

Speed addicted

Original Poster:

6,336 posts

258 months

Monday 26th June 2017
quotequote all

Looks Ok, but the camera is being quite flattering, and there are three shades of red, plus some scuffs.




Stripped of the fairings and tank.


Brake calipers were horrible, I spent ages with a pick cleaning out the seal grooves. It took 4bar to shift the rear piston




This is a top fork bolt, I think it may have been slightly over tightened at some point! I was cleaning It up and noticed the threads.


Bars, yoke and levers painted, brake master cylinder seals replaced.


I managed to get an oil cooler from Austria and lines from Germany (and painted the lines)


Speed addicted

Original Poster:

6,336 posts

258 months

Monday 26th June 2017
quotequote all

Went high tech for painting the forks.




Completed calipers, new seals fitted.


podman

9,087 posts

271 months

Tuesday 27th June 2017
quotequote all
Great work mate , coming along nicely.

graham22

3,328 posts

236 months

Tuesday 27th June 2017
quotequote all
I have road tests of these in magazines from when they were introduced - they didn't know what to test it against as the 600 class hadn't been 'invented'.

As for seat covers, are you near the coast? Have always used sail makers to do mine as they usually do boat cushions too.

Speed addicted

Original Poster:

6,336 posts

258 months

Tuesday 27th June 2017
quotequote all
podman said:
Great work mate , coming along nicely.
Cheers!
Someone (not the wife, thankfully) asked me how much I've spent so far. I honestly have no idea.

I decided early on to stop looking at costs and try to do a decent job, the biggest expense is coming up when I get the tank and fairings resprayed in about 3 weeks. It'll finally be one shade of red!

Currently preparing another parts order for cables and other things it's probably sensible to change like the fuel tap internals.
Ordered another exhaust from Ebay last night, the connection between the headers and end can on mine is badly corroded underneath.

Due to me working on oil rigs I have about 4 weeks at home before I've said I would do the Lands end to John O Groats run in september, so I'll have to get a serious move on to get the bike through an MOT then ride it enough to be confident in it's reliability.


Speed addicted

Original Poster:

6,336 posts

258 months

Tuesday 27th June 2017
quotequote all
graham22 said:
I have road tests of these in magazines from when they were introduced - they didn't know what to test it against as the 600 class hadn't been 'invented'.

As for seat covers, are you near the coast? Have always used sail makers to do mine as they usually do boat cushions too.
Never thought of the boat folks, I live near Aberdeen so there's bound to be plenty!