TDM shifting 12 issue, any ideas?
Discussion
Edit: the titles clearly don't support the character '>' so the heading looks a bit silly, I mean shifting from first to second.
I've got a 2000 model Yamaha TDM 850 and I know the gearboxes on these aren't the nicest to use, but unless you take your time and shift very deliberately it doesn't go into second and just gets neutral. Take it slowly and it slots in every time, the rest of the gears are fine (if a little clunky) and Google doesn't give any clues or ideas. Someone else with several decades of riding experience has tried it and encountered the same issue, which he put down to it being an old and high-ish mileage bike but surely it isn't just normal wear and tear?
The bike has done 76k KM so is no spring chicken, it was cheap and I can ride round the issue but if I can sort it somehow it'll make it much nicer to ride!
I've got a 2000 model Yamaha TDM 850 and I know the gearboxes on these aren't the nicest to use, but unless you take your time and shift very deliberately it doesn't go into second and just gets neutral. Take it slowly and it slots in every time, the rest of the gears are fine (if a little clunky) and Google doesn't give any clues or ideas. Someone else with several decades of riding experience has tried it and encountered the same issue, which he put down to it being an old and high-ish mileage bike but surely it isn't just normal wear and tear?
The bike has done 76k KM so is no spring chicken, it was cheap and I can ride round the issue but if I can sort it somehow it'll make it much nicer to ride!
Edited by jamiebae on Friday 30th June 18:27
basically the cog(s) are knackered. They slide along the shaft to engage and if the sticky out bits (c) are knackered it won't engage with the receiving slots smoothly (I believe).

http://jaws.tips/motorbike/gears.html
http://jaws.tips/motorbike/gears.html
CoolHands said:
basically the cog(s) are knackered. They slide along the shaft to engage and if the sticky out bits (c) are knackered it won't engage with the receiving slots smoothly (I believe).

http://jaws.tips/motorbike/gears.html
OK, so it's just a bit worn then?http://jaws.tips/motorbike/gears.html
The only other bikes I've ridden to compare it to are brand new and obviously a lot nicer to use (Multistrada 1200, BMW R NineT, Ducati Scrambler) so I don't have a lot to compare it to. I guess in car terms the TDM is a 200k mile Volvo V70 and I've been testing a brand new Cayenne Turbo S, an M Roadster and an MX5

yes my 1999 honda transalp does it to, particularly into 2nd gear (that is often the most heavily used on motorbikes). I have found raising the revs to approx 2,500 (while clutch is pulled in) when engaging 2nd (from 1st) can help. I think those older gearboxes are more prone to it, compared with later bikes.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff



