Self Tyre fitting and Balancing
Self Tyre fitting and Balancing
Author
Discussion

Renn Sport

Original Poster:

2,761 posts

240 months

Thursday 13th July 2017
quotequote all
So getting tyres for track has proved to me one problem, which thankfully has been resolved because of the great service at FWR, however getting my wheels over to them is an issue. Also getting tyres fitted means more time out and about when I could be with the family.

Was thinking about the convenience of being able to change my own tyres?

I was wondering have any of you used some of the these portable tyre fitting stations? I have seen a couple on eBay from £36 to £80 and wondered if its really worth the hassle? I do like the thought of being able to swap tyres when I want. Just wondered if these portable jobs are any good?

http://www.ebay.co.uk/itm/Mechanics-Workshop-Garag...

http://www.ebay.co.uk/itm/Tyre-Changer-Bead-Breake...

Also need a balancer too...

Dog Star

17,649 posts

199 months

Thursday 13th July 2017
quotequote all
A mate of mine changes my tyres for me with levers and although he's taught me to do it I still just mug him to do so - it's amazing to watch the speed he works at - I don't think you could do it much quicker if at all with a full size hydraulic tyre machine.

All he uses is three tyre levers, a plastic rim protector and a couple of blocks of wood. He can do a front and rear in about 3 or 4 minutes maximum.

Balancing - I do my own. There are plenty of the stands (the ones with two uprights where you place the axle on bearings) on Ebay. Mine is a "tech 7" or somesuch and was about 30 quid from (I think) M&P. Just take your time and it's really easy. I combine the balancing with a bit of caliper and swingarm cleaning while I'm waiting for the wheel to stop spinning.

It's a total boon being able to do your own and not spend ages carting the wheels around.

And it's really easy - set of decent Buzzetti tyre levers, cheap plastic guard and some tyre soap and off you go.

CAPP0

20,881 posts

234 months

Thursday 13th July 2017
quotequote all
I'll just add to the above post that it's really easy - except when it really isn't even slightly fkn easy at all and takes you an hour of your time, a gallon of your sweat, and more knuckles than you have fingers. Yes, with three tyre levels and rim protectors and everything. Oh and don't forget the bit where the level slips off the rim protector and takes a chunk out of your rim.

To be fair, all of the above applied to tyres which were old, knackered and very hard/unsupple, but it was a real fight.

I've got a pair of Michelins to fit to my TS250 shortly and I'm seriously considering just shelling out for someone else to do them, just so as not to break myself again.

Dog Star

17,649 posts

199 months

Thursday 13th July 2017
quotequote all
CAPP0 said:
I'll just add to the above post that it's really easy - except when it really isn't even slightly fkn easy at all and takes you an hour of your time, a gallon of your sweat, and more knuckles than you have fingers. Yes, with three tyre levels and rim protectors and everything. Oh and don't forget the bit where the level slips off the rim protector and takes a chunk out of your rim.

To be fair, all of the above applied to tyres which were old, knackered and very hard/unsupple, but it was a real fight.

I've got a pair of Michelins to fit to my TS250 shortly and I'm seriously considering just shelling out for someone else to do them, just so as not to break myself again.
The tyres my mate does for me have been off my MV F4 and new R1. However I've only done it under his supervision as the consequences of me getting it wrong could be expensive and disastrous. (He's an actual bike mechanic btw)

Prof Prolapse

16,163 posts

221 months

Thursday 13th July 2017
quotequote all
For £20-30 I really don't think it's worth the hassle personally.

To each their own of course.





scorcher

4,130 posts

265 months

Thursday 13th July 2017
quotequote all
CAPP0 said:
I'll just add to the above post that it's really easy - except when it really isn't even slightly fkn easy at all and takes you an hour of your time, a gallon of your sweat, and more knuckles than you have fingers. Yes, with three tyre levels and rim protectors and everything. Oh and don't forget the bit where the level slips off the rim protector and takes a chunk out of your rim.

To be fair, all of the above applied to tyres which were old, knackered and very hard/unsupple, but it was a real fight.

I've got a pair of Michelins to fit to my TS250 shortly and I'm seriously considering just shelling out for someone else to do them, just so as not to break myself again.
Metzelers 180's and 120's were like this for me. A real pig to get on the rim. Blood and sweat (no tears)! Paint offf the rim and chunks out of the tyre bead. Gave up not long after and now pay the local garage a fiver a wheel to swap tyres (I get rid and balance myself). Bought some Michelin 2cts and they were really floppy in comparision to the Metz so may have had more luck with them.

Birky_41

4,667 posts

215 months

Thursday 13th July 2017
quotequote all
I get all my track tyres from Bob too. Given hes London and Im Essex I have the same dilemma

My boy also races but moto-x bikes so I do all his tyre changes myself. I have a wheel brace to hold them and tubes have never been nipped yet!

However I have never done a road/track tyre despite my love for kicking out a rear purely because of the balance issue. I would buy one (I think they are about £30? so would pay for themselves pretty quick) but theres storing it which I hope you have a decent sized garage. I have 4 bikes in a single garage so its simply impossible to store anywhere

I pay a local bike shop I have known for 15+ years to swap them and balance. Wheels out he charges £5-10 each normally depending what mood I catch him in spin

If you can be bothered, it really is quite easy. A decent compressor, a few tyre levers and rim protectors and that white slippy stuff is all you need. I can swap a tyre even with a tube in 10 minutes...and I hate doing it

Jazoli

9,707 posts

281 months

Thursday 13th July 2017
quotequote all
I DIY it, it's easy with 3 good levers, tyre soap, a home made bead breaker and some bits of 2x4, balancing is simple too with a balancer off ebay and some stick on weights, you don't need a big compressor, I have seated the bead on almost all the tyres with my £30 12V one from ecp http://www.eurocarparts.com/ecp/p/car-accessories/...

an hour tops from start to finish, the longest wait is waiting for the balancer to stop spinning!

Far less faff than going backwards and forwards to the bike shop who don't really want to do them and don't take care of the rims, I've probably saved about £500 over the years diy'ing it, but its more convenience than anything for me.



Edited by Jazoli on Thursday 13th July 12:13

2wheelsjimmy

624 posts

128 months

Thursday 13th July 2017
quotequote all
The tyre makes all the difference.

For some reason dunlop sportsmart 2s were a pain in the arse. Since switching to M7RRs it takes 5 min to get a tyre off and new one on. It's super simple. I use dish wash liquid and water in a bottle as lube. And abba tyre levers, you need 3 really. I seat the bead with a bicycle track pump. Balance them with one of those £30 ebay stands. I break the bead by working around the tyre levers pushing the tyre away from rim, use lots of soap water.

No hassle.


http://www.ebay.co.uk/itm/Tech-7-Motorcycle-Wheel-...

http://abbastands.co.uk/product-detail.asp?pid=25

Edited by 2wheelsjimmy on Thursday 13th July 14:16

DuraAce

4,272 posts

191 months

Thursday 13th July 2017
quotequote all
If I could find somewhere that fits tyres (not supplied them) for £5 I'd be happy! It's £15-£20 minimum per loose wheel in my area.

I fit my own instead. Buy them online, usually oponeo - no high street shops can get near their prices.

I break the bead then cut old tyres off, less chance of me marking the rim that way. Then fit new ones with a bit of lube, trick is having them warm before hand. Pop them in your tyre warmers, or in the house when the heating is on, or leave them in the sun in summer- they go on so easy when warm so the sidewalls are supple.
5-10 minutes per wheel.


Renn Sport

Original Poster:

2,761 posts

240 months

Thursday 13th July 2017
quotequote all
Sorry for not getting back... I have been mega busy at work.

I think I like the idea of not having to spend a morning going to the tyre fitter and getting queue and being able to swap the tyres late evening in my garage when kids are asleep and the wife is watching bloody Holby.

I am worried that my mates will be trying to get me to change their tyres, which I can't be arsed with.


Also my track tyres are Dunlop d212's and have a very stiff carcass. The Supercorsa's I have noted are very soft.

Something to think about. Might give it a whirl.

Birky_41

4,667 posts

215 months

Thursday 13th July 2017
quotequote all
Renn Sport said:
Something to think about. Might give it a whirl.
Update if you do as I'll probably 'make space' and get one myself

Only difference is my wife watches 'love island' poxy programme

leighz

473 posts

163 months

Thursday 13th July 2017
quotequote all
dunlops - complete pig to get on - very tight
michelin - nice and easy - few minutes and you're done

recommend liberal user of tyre soap, rim protectors and cable ties to compress the part of the tyre already on down into the 'lower' section of the rim as you get the final section on. And a lot of patience.

A worthwhile thing to do if you ask me. I couldn't find someone local to me who didn't knacker my rims or charge a small fortune (lets be honest - garages don't want to fit tyres you've bought cheaper online rather than from them and some - rightly I guess - refused to do it all) so started doing it myself.

Renn Sport

Original Poster:

2,761 posts

240 months

Friday 14th July 2017
quotequote all
Birky_41 said:
Renn Sport said:
Something to think about. Might give it a whirl.
Update if you do as I'll probably 'make space' and get one myself

Only difference is my wife watches 'love island' poxy programme
My sincere sympathies... I have been quite disparaging about thee soaps, my Mrs did respond by saying all I think about is bloody bikes and racing.

I did try to come back with coolly saying.. 'racing its life... [moody pause] everything in between is just waiting'

She parried with a quizzical look of 'are you for real?' She won.


I guess I am not Steve McQueen.


leighz said:
dunlops - complete pig to get on - very tight
michelin - nice and easy - few minutes and you're done

recommend liberal user of tyre soap, rim protectors and cable ties to compress the part of the tyre already on down into the 'lower' section of the rim as you get the final section on. And a lot of patience.

A worthwhile thing to do if you ask me. I couldn't find someone local to me who didn't knacker my rims or charge a small fortune (lets be honest - garages don't want to fit tyres you've bought cheaper online rather than from them and some - rightly I guess - refused to do it all) so started doing it myself.
I think having the right tools will hopefully prevent damage to either myself or the wheels. I am hoping I don't have resort to cable ties (although I appreciate the tip) and am able to just get it done with gear.

Anyway still not totally sold on the idea but will probably buy the kit next week.

Shadow R1

3,845 posts

207 months

Friday 14th July 2017
quotequote all
Bridgestone i've always had to fight, to get on\off.

Michelin\Pirelli\Metzler no problems with.

I use 3 levers, with a block of wood as a stopper.