Cleaning fork internals
Cleaning fork internals
Author
Discussion

robbocop33

Original Poster:

1,207 posts

138 months

Friday 28th July 2017
quotequote all
Hi, restoring the old zxr750, decided to treat it to new fork stanchions. Just wondering what to clean fork internals with, bushes etc. Is paraffin ok?

Jazzy Jag

3,718 posts

122 months

Friday 28th July 2017
quotequote all
How far are you going to strip them down?

If you are going to completely strip and replace all the seals, etc then Paraffin would be OK.

If not I would remove, drain and remove the spring, put some thin oil in, work them in and out, then drain the oil and repeat until clean.

cmaguire

3,589 posts

140 months

Friday 28th July 2017
quotequote all
Petrol is a decent cleaner as it evaporates better than paraffin. No naked flames though.

dc2rr07

1,238 posts

262 months

Friday 28th July 2017
quotequote all
Glad you have gone with the new fork stansions, as others have said petrol, diesel or kerosene is ok after cleaning I would give them a spray of wd40 or light oil afterwards if you are not assembling straight away.
Hoping for some photos after the restorationsmile

robbocop33

Original Poster:

1,207 posts

138 months

Friday 28th July 2017
quotequote all
New stanchions were 200 quid, which is a fair chunk but compared to taking a chance with rechroming at £175 it was a no brainer?
I'd like to recommend a product i stumbled across, if you're looking for a fantastic, fool proof, black enamel finish anywhere on your bike, Simoniz black engine enamel spray paint, got it off Ebay, stunning stuff, goes a black mirror finish!.
Done the frame sides, outer forj tubes and forj bottoms and it matches black gloss powdercoat on my swingarm perfectly!!
It also has a tough finish.
I tried hammerite black engine enamel before on another bike and it was crap! This stuff just clings and goes glossy as hell right away!
I'll post pics tomorriw.



Edited by robbocop33 on Saturday 29th July 11:14




Edited by robbocop33 on Sunday 30th July 10:50