Neck pain - bike doesn't fit me??
Discussion
I have got a Ducati Monster 821 which I use for commuting in London - 15 miles each way on a daily basis.
I have done about 2.5k on it since April and I generally really like the bike.
However, I am in agony. Due to the stop start nature of the commute, I am regularly holding the clutch in and lots of gear changes etc. My neck and shoulder on the left side are constantly in pain - like a trapped nerve but worse.
I am not sure if it is that the bike just does not fit me - too much of a reach to the bars and a bit too much weight on my arms as the bike does push me forward a bit, or if it is something else like too much tension when I am riding.
I don't really want to chop it in for something else as I will take a bit of a hit on the depreciation as I bought it new.
Any thoughts?
I may arrange an extended test ride of a couple of other bikes to see if it is me or the bike, but any suggestions from you more experienced guys would be welcome.
Or any thoughts on alternatives? I am fairly standard size - 5'9" - so most bikes should fit. I might try a sports bike as the clip in bars may actually be less of a reach but maybe not ideal for commuting.
I have done about 2.5k on it since April and I generally really like the bike.
However, I am in agony. Due to the stop start nature of the commute, I am regularly holding the clutch in and lots of gear changes etc. My neck and shoulder on the left side are constantly in pain - like a trapped nerve but worse.
I am not sure if it is that the bike just does not fit me - too much of a reach to the bars and a bit too much weight on my arms as the bike does push me forward a bit, or if it is something else like too much tension when I am riding.
I don't really want to chop it in for something else as I will take a bit of a hit on the depreciation as I bought it new.
Any thoughts?
I may arrange an extended test ride of a couple of other bikes to see if it is me or the bike, but any suggestions from you more experienced guys would be welcome.
Or any thoughts on alternatives? I am fairly standard size - 5'9" - so most bikes should fit. I might try a sports bike as the clip in bars may actually be less of a reach but maybe not ideal for commuting.
Hi
I'd be surprised if its the bike, at 5'9" that's no real stretch at all and the Monster doesn't have a particularly aggressive bar set up, I suspect tension is a lot to do with it.
Before chopping the bike in I would investigate the following:
1. See if you can borrow a Hypermotard or Hyperstrada from a dealer and do 15 miles on that, if that's comfortable then that would point to the Monster being the issue.
2. If it is the Monster, there are various bar riser kits that would solve your problem and enable you to keep the Monster.
I ran a Monster for 13k miles and never had a neck issue and I'm 5'8 and now run a Hyper.
Good luck
I'd be surprised if its the bike, at 5'9" that's no real stretch at all and the Monster doesn't have a particularly aggressive bar set up, I suspect tension is a lot to do with it.
Before chopping the bike in I would investigate the following:
1. See if you can borrow a Hypermotard or Hyperstrada from a dealer and do 15 miles on that, if that's comfortable then that would point to the Monster being the issue.
2. If it is the Monster, there are various bar riser kits that would solve your problem and enable you to keep the Monster.
I ran a Monster for 13k miles and never had a neck issue and I'm 5'8 and now run a Hyper.
Good luck
Sometimes small changes can make a big difference.
My brother had terrible problems with neck and shoulder pain when he rode an old Triumph 900 Sprint. Luckily the bike had already been changed to use normal handlebars, so he was able to try as many different bars as he could scrounge off his mates and me, until he found some that worked. I think he ended up with Renthal Low bars. They were a bit higher and wider, and more swept back, and that was enough to fix the problem. They were also gold, so I didn't even ask for any money.
My brother had terrible problems with neck and shoulder pain when he rode an old Triumph 900 Sprint. Luckily the bike had already been changed to use normal handlebars, so he was able to try as many different bars as he could scrounge off his mates and me, until he found some that worked. I think he ended up with Renthal Low bars. They were a bit higher and wider, and more swept back, and that was enough to fix the problem. They were also gold, so I didn't even ask for any money.

If you are finding the clutch effort to be the main problem you could change it to a hydraulic setup.
I recently helped a friend install a DUCABIKE hydraulic clutch conversion on his Hypermotard 821, as after shoulder surgery he was finding the clutch to cause him pain after a while in traffic.
You would need the AFI03 Clutch Kit (MY17) + AF01 Slave Cylinder + KTCF01 Clutch Cable Control Cap (We forgot this initially so had a hole where we removed the old cable assembly).
They quote 50% reduction in clutch pull. Hard to put an exact figure on the effort reduction but he is much more comfortable with the clutch operation now.
I guess the other thing is as everyone always says you need to relax. Loosen your grip on the bars. You shouldn't be leaning your weight onto your arms/hands. You should instead be using your legs to squeeze/grip the motorcycle and use your core to hold yourself up. Can be a bit hard at first and requires a conscious effort to remind yourself to do it but becomes second nature after a while.
I recently helped a friend install a DUCABIKE hydraulic clutch conversion on his Hypermotard 821, as after shoulder surgery he was finding the clutch to cause him pain after a while in traffic.
You would need the AFI03 Clutch Kit (MY17) + AF01 Slave Cylinder + KTCF01 Clutch Cable Control Cap (We forgot this initially so had a hole where we removed the old cable assembly).
They quote 50% reduction in clutch pull. Hard to put an exact figure on the effort reduction but he is much more comfortable with the clutch operation now.
I guess the other thing is as everyone always says you need to relax. Loosen your grip on the bars. You shouldn't be leaning your weight onto your arms/hands. You should instead be using your legs to squeeze/grip the motorcycle and use your core to hold yourself up. Can be a bit hard at first and requires a conscious effort to remind yourself to do it but becomes second nature after a while.
TNJ said:
I have got a Ducati Monster 821 which I use for commuting in London - 15 miles each way on a daily basis.
I have done about 2.5k on it since April and I generally really like the bike.
However, I am in agony. Due to the stop start nature of the commute, I am regularly holding the clutch in and lots of gear changes etc. My neck and shoulder on the left side are constantly in pain - like a trapped nerve but worse.
I am not sure if it is that the bike just does not fit me - too much of a reach to the bars and a bit too much weight on my arms as the bike does push me forward a bit, or if it is something else like too much tension when I am riding.
I don't really want to chop it in for something else as I will take a bit of a hit on the depreciation as I bought it new.
Any thoughts?
I may arrange an extended test ride of a couple of other bikes to see if it is me or the bike, but any suggestions from you more experienced guys would be welcome.
Or any thoughts on alternatives? I am fairly standard size - 5'9" - so most bikes should fit. I might try a sports bike as the clip in bars may actually be less of a reach but maybe not ideal for commuting.
Could be the wind. Have you tried protecting your neck really well (I do not mean hastily pulled on thin neck warmer)?I have done about 2.5k on it since April and I generally really like the bike.
However, I am in agony. Due to the stop start nature of the commute, I am regularly holding the clutch in and lots of gear changes etc. My neck and shoulder on the left side are constantly in pain - like a trapped nerve but worse.
I am not sure if it is that the bike just does not fit me - too much of a reach to the bars and a bit too much weight on my arms as the bike does push me forward a bit, or if it is something else like too much tension when I am riding.
I don't really want to chop it in for something else as I will take a bit of a hit on the depreciation as I bought it new.
Any thoughts?
I may arrange an extended test ride of a couple of other bikes to see if it is me or the bike, but any suggestions from you more experienced guys would be welcome.
Or any thoughts on alternatives? I am fairly standard size - 5'9" - so most bikes should fit. I might try a sports bike as the clip in bars may actually be less of a reach but maybe not ideal for commuting.
Thanks for all the replies - a few good ideas to try out. Hopefully I will find a simple solution.
I think this probably stems from a broken shoulder after an off about 14 years ago, so I may just have to man up and live with it but I will try a few alternatives to see if it can improve
I think this probably stems from a broken shoulder after an off about 14 years ago, so I may just have to man up and live with it but I will try a few alternatives to see if it can improve
TNJ said:
Thanks for all the replies - a few good ideas to try out. Hopefully I will find a simple solution.
I think this probably stems from a broken shoulder after an off about 14 years ago, so I may just have to man up and live with it but I will try a few alternatives to see if it can improve
See a decent osteopath - NOW!!!!!!!!!!!!!!!!!!!!!!I think this probably stems from a broken shoulder after an off about 14 years ago, so I may just have to man up and live with it but I will try a few alternatives to see if it can improve
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


