Anyone replaced fork chrome stanchions before?
Discussion
I'm having a complete nightmare here, after falsely thinking i had scewed the stanchions fully home they leaked from the top of the fork foots, obviously.
So took them apart and went past where they 'stuck' before and know now they are screwed down fully.
Pumped up and down on thenm, a lot, befoe refitting to bike, no leaking!
But after fitting them to the bike and putting bike down on the deck the fluid is rising up past the fork foot top again??
I've been told there should be an o-ring inside the fork foot but i can't remember seeing any as i gave inside there a good clean. Plus i've checked an exploded diagram of a 93 zxr750 fork and see no o-ring?
Anyone any ideas?
So took them apart and went past where they 'stuck' before and know now they are screwed down fully.
Pumped up and down on thenm, a lot, befoe refitting to bike, no leaking!
But after fitting them to the bike and putting bike down on the deck the fluid is rising up past the fork foot top again??
I've been told there should be an o-ring inside the fork foot but i can't remember seeing any as i gave inside there a good clean. Plus i've checked an exploded diagram of a 93 zxr750 fork and see no o-ring?
Anyone any ideas?
Edited by robbocop33 on Sunday 6th August 18:37
Not sure if this is the same as yours but a quick google got this schematic for you showing the various seals and o-rings on a 95 zxr.
https://www.motorcyclespareparts.eu/kawasaki-parts...
https://www.motorcyclespareparts.eu/kawasaki-parts...
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


