Oh dear, another 2 stroke..........
Oh dear, another 2 stroke..........
Author
Discussion

tezzer

Original Poster:

984 posts

217 months

Sunday 6th August 2017
quotequote all
Couldn't resist, had one back on the 90's, and just HAD to buy it !

Fleegle

16,710 posts

207 months

Sunday 6th August 2017
quotequote all

Nice. Still has the original wheels too

knitware

1,486 posts

224 months

Sunday 6th August 2017
quotequote all
Very nice! Can I ask, how do you fuel these things, is it unleaded and Castrol R (equivalent) in the auto-lube?

Fluid

1,750 posts

216 months

Monday 7th August 2017
quotequote all
What is it? Can't see pictures at work.

tezzer

Original Poster:

984 posts

217 months

Monday 7th August 2017
quotequote all
TDR250..........Canadian import, in need of a little (but hopefully not a lot) of love and attention.

tezzer

Original Poster:

984 posts

217 months

Monday 7th August 2017
quotequote all
knitware said:
Very nice! Can I ask, how do you fuel these things, is it unleaded and Castrol R (equivalent) in the auto-lube?
Unleaded in the tank, and Motul 510 semi synthetic in the autolube system.

hman

7,497 posts

225 months

Monday 7th August 2017
quotequote all
You should budget for a piston rebuild kit when buying a 2nd hand 2 smoke - unless the seller can demonstrate beyond doubt that its been done within the last 6 months.


tezzer

Original Poster:

984 posts

217 months

Monday 7th August 2017
quotequote all
hman said:
You should budget for a piston rebuild kit when buying a 2nd hand 2 smoke - unless the seller can demonstrate beyond doubt that its been done within the last 6 months.
After 40 years of running rebuilding Japanese strokers, that's fair advice.........

MotorsportTom

3,343 posts

192 months

Monday 7th August 2017
quotequote all
Absolutely love these!

Only saw one for the first time a couple of years back and I am in love! I would love a ride on one some day

podman

9,086 posts

271 months

Monday 7th August 2017
quotequote all
hman said:
You should budget for a piston rebuild kit when buying a 2nd hand 2 smoke - unless the seller can demonstrate beyond doubt that its been done within the last 6 months.
Lovely bike OP, my friend has one in the same scheme and loves its, it flys along and is proper comfy ... despite having pistons of more than 27 weeks of age in it..!

jamiebae

6,245 posts

242 months

Monday 7th August 2017
quotequote all
Nice!

I (briefly) had a TDR 125 a few months ago and it was a fun little thing, I imagine the 250 is fantastic!

graham22

3,328 posts

236 months

Monday 7th August 2017
quotequote all
tezzer said:
knitware said:
Very nice! Can I ask, how do you fuel these things, is it unleaded and Castrol R (equivalent) in the auto-lube?
Unleaded in the tank, and Motul 510 semi synthetic down the back of the tank and over the battery, shock and most of the rear end.
Having owned one and used the horizontal oil filler, I've corrected this for you.


Funnel or bent piece of plastic works wonders here.

hman

7,497 posts

225 months

Monday 7th August 2017
quotequote all
podman said:
hman said:
You should budget for a piston rebuild kit when buying a 2nd hand 2 smoke - unless the seller can demonstrate beyond doubt that its been done within the last 6 months.
Lovely bike OP, my friend has one in the same scheme and loves its, it flys along and is proper comfy ... despite having pistons of more than 27 weeks of age in it..!
Dont take this the wrong way but your friend is probably blissfully ignorant of the condition of his aging 2 stroke engine - which is a silly situation to be in bearing in mind that the engine isn't designed to last as long as the age of his bike,

Changing a piston costs about £80 -£100 per piston and takes probably 2 hours per piston tops and whilst you are in there you can assess :-

How the engine is running (lean, rich etc)
If the lubrication ratio is correct
The amount of play in the big end bearing (you'll be changing the little end when you swap the piston),
Whether or not the main seals are still keeping cack out of the engine
Whether the main bearings are shedding the plating on the races or balls which will cause a catastrophic engine failure (this happens from in frequent use and moisture allowing the bearings to corrode)
The condition of the barrel (and if its damaged - what might might be the cause)

So like I say - if the former owner cannot provide paperwork to the effect that a piston has been installed within the last 6 months then its a very good idea to assume it hasn't and then set about doing the work.

Your friend will then have ensured their bike is running as well as possible, ensured maximum reliabilty, and increased its re-sale value/attractiveness.

Really for the amount of input its an absolute no brainer...

Until your friend does so - my advice to him would be that a finger kept on the clutch lever is a good idea just in case his engine of uncertain condition decides its had enough and stops rather suddenly.....

2 Strokes have rather more of a habit of doing that than 4 strokes..


graham22

3,328 posts

236 months

Monday 7th August 2017
quotequote all
Quarter of a century ago - I can remember it blowing up as if it was yesterday!!


podman

9,086 posts

271 months

Monday 7th August 2017
quotequote all
hman said:
podman said:
hman said:
You should budget for a piston rebuild kit when buying a 2nd hand 2 smoke - unless the seller can demonstrate beyond doubt that its been done within the last 6 months.
Lovely bike OP, my friend has one in the same scheme and loves its, it flys along and is proper comfy ... despite having pistons of more than 27 weeks of age in it..!
Dont take this the wrong way but your friend is probably blissfully ignorant of the condition of his aging 2 stroke engine - which is a silly situation to be in bearing in mind that the engine isn't designed to last as long as the age of his bike,
....it was rebuilt 3 years ago and has covered 1200 miles since then...My LC was rebuilt 4 years ago and is running as sweet as a nut having covered 3,000 miles since then...as is my KR1, these bikes generally dont cover any meaningful mileage nowadays, I dont know anyone who rebuilds the top end of their road bike every 6 months.

Your points are valid but there is more than 1 way to check and see how a stroker is running without having to buy a top end gasket set as part of the process.


Edited by podman on Monday 7th August 22:08

MotorsportTom

3,343 posts

192 months

Tuesday 8th August 2017
quotequote all
graham22 said:
Quarter of a century ago - I can remember it blowing up as if it was yesterday!!

Cracking pic thumbup


I sometimes feel I was born in the wrong era.
Loud jackets, lairy bikes (colour schemes and rideability) and less people about. Sounds perfect!

graham22

3,328 posts

236 months

Tuesday 8th August 2017
quotequote all
MotorsportTom said:
Cracking pic thumbup


I sometimes feel I was born in the wrong era.
Loud jackets, lairy bikes (colour schemes and rideability) and less people about. Sounds perfect!
It's not all rose tinted memories, I'd say my S1000R is more lairy than the TDR. Still have the jacket in the loft & it fits (just).

At the risk of upsetting & causing disappointment, the TDR wasn't that loony - quite heavy & a lot of weight over the front end made wheelies harder plus the long travel suspension and compromise tyres didn't help the handling. Yamaha should have made it with the 350YPVS motor rather than the TZR (the TZR scored because the chassis was better). A soft super moto like a DRZ400SM would beat a TDR everywhere.

I did ride Pat Seftons TDRG500 Hillclimber (TDR front end & bodywork on a big bore, tuned RG500) - that was fun.

Despite all of what I've said, I'd still like another one just to sit in the garage and ride on fun days.


tezzer

Original Poster:

984 posts

217 months

Tuesday 8th August 2017
quotequote all
I had one years ago, hence the re-purchase. I lived in Hemel Hempstead, well someone has to, and worked on Lower Thames Street in the City of London. The commute on the TDR was MUCH more fun than on our official BMW airheads and the like.

Wheelie away from the lights, stoppies at the next set, repeat.

SMar

207 posts

171 months

Tuesday 8th August 2017
quotequote all
hman said:
podman said:
hman said:
You should budget for a piston rebuild kit when buying a 2nd hand 2 smoke - unless the seller can demonstrate beyond doubt that its been done within the last 6 months.
Lovely bike OP, my friend has one in the same scheme and loves its, it flys along and is proper comfy ... despite having pistons of more than 27 weeks of age in it..!
Dont take this the wrong way but your friend is probably blissfully ignorant of the condition of his aging 2 stroke engine - which is a silly situation to be in bearing in mind that the engine isn't designed to last as long as the age of his bike,

Changing a piston costs about £80 -£100 per piston and takes probably 2 hours per piston tops and whilst you are in there you can assess :-

How the engine is running (lean, rich etc)
If the lubrication ratio is correct
The amount of play in the big end bearing (you'll be changing the little end when you swap the piston),
Whether or not the main seals are still keeping cack out of the engine
Whether the main bearings are shedding the plating on the races or balls which will cause a catastrophic engine failure (this happens from in frequent use and moisture allowing the bearings to corrode)
The condition of the barrel (and if its damaged - what might might be the cause)

So like I say - if the former owner cannot provide paperwork to the effect that a piston has been installed within the last 6 months then its a very good idea to assume it hasn't and then set about doing the work.

Your friend will then have ensured their bike is running as well as possible, ensured maximum reliabilty, and increased its re-sale value/attractiveness.

Really for the amount of input its an absolute no brainer...

Until your friend does so - my advice to him would be that a finger kept on the clutch lever is a good idea just in case his engine of uncertain condition decides its had enough and stops rather suddenly.....

2 Strokes have rather more of a habit of doing that than 4 strokes..
That’s not always the case I had a RZV500R (1984) I bought in 2012 that had 5,500 KM on the clock, so must have been stored for many years and it was obvious from its condition that it had never been tampered with, it ran like clockwork. I put 2000 miles on it over 4 years and was faultless. So what you are saying is good advice but not necessarily true.

MotorsportTom

3,343 posts

192 months

Tuesday 8th August 2017
quotequote all
graham22 said:
MotorsportTom said:
Cracking pic thumbup


I sometimes feel I was born in the wrong era.
Loud jackets, lairy bikes (colour schemes and rideability) and less people about. Sounds perfect!
It's not all rose tinted memories, I'd say my S1000R is more lairy than the TDR. Still have the jacket in the loft & it fits (just).

At the risk of upsetting & causing disappointment, the TDR wasn't that loony - quite heavy & a lot of weight over the front end made wheelies harder plus the long travel suspension and compromise tyres didn't help the handling. Yamaha should have made it with the 350YPVS motor rather than the TZR (the TZR scored because the chassis was better). A soft super moto like a DRZ400SM would beat a TDR everywhere.

I did ride Pat Seftons TDRG500 Hillclimber (TDR front end & bodywork on a big bore, tuned RG500) - that was fun.

Despite all of what I've said, I'd still like another one just to sit in the garage and ride on fun days.
I have no doubts more modern bikes are faster and I didn't necessarily mean lairy due to engine. You described it perfectly in that tyres and suspension made it more of an "interesting" ride.

A TDRG500 sounds like a helluva monster!