Like an absolute retard, I've lost my only Fireblade key...
Discussion
Afternoon all.
Bought my bike on Saturday and (of course) it only came with one key.
Leaving aside the point who is f
king stupid enough to not have a spare key cut whilst owning a bike, I have done the dreaded and lost it.
Had the key at quarter to 7, didn't have the key at 0700!
Anyway, I digress, it's a 51 reg 929 with HISS. Can anyone offer any advice/solution that is cheaper than £400?
Awaiting a roasting...
Thanks, Stuart.
Bought my bike on Saturday and (of course) it only came with one key.
Leaving aside the point who is f
king stupid enough to not have a spare key cut whilst owning a bike, I have done the dreaded and lost it.Had the key at quarter to 7, didn't have the key at 0700!
Anyway, I digress, it's a 51 reg 929 with HISS. Can anyone offer any advice/solution that is cheaper than £400?
Awaiting a roasting...
Thanks, Stuart.
Well, you bought the wrong Fireblade, everyone here knows the 954s are cossetted & owners would have had spare keys aplenty.
Sorry, not helping but have you tried a good local key cutting company? There's one local to us who often tells how he's be able to cut and programme coded keys (mainly cars admittedly) where originals have been lost.
I appreciate these are done by reading OBD, not sure if the Fireblade of that age would have such a point and I guess if it has, it would be under the locked seat (but then again that may not be a problem to a locksmith).
A local locksmith was able to cut a spare key for my '98 Fireblade which I was able to cut down & use with a Meta Alarm fob to make into an integral key/alarm fob.
Sorry, not helping but have you tried a good local key cutting company? There's one local to us who often tells how he's be able to cut and programme coded keys (mainly cars admittedly) where originals have been lost.
I appreciate these are done by reading OBD, not sure if the Fireblade of that age would have such a point and I guess if it has, it would be under the locked seat (but then again that may not be a problem to a locksmith).
A local locksmith was able to cut a spare key for my '98 Fireblade which I was able to cut down & use with a Meta Alarm fob to make into an integral key/alarm fob.
Put simply, the chip in the key corresponds to the engine management system.
Without the correct code, the engine will not run.
As far as I remember, you cannot read the code from the hiss system so if you lose all the keys you are replacing the whole lot and not just cutting a new key or replacing the barrel.
Quickest way to find out is call a Honda dealer.
Without the correct code, the engine will not run.
As far as I remember, you cannot read the code from the hiss system so if you lose all the keys you are replacing the whole lot and not just cutting a new key or replacing the barrel.
Quickest way to find out is call a Honda dealer.
If you find it OP, get a few spares cut and then cable tie the original key head (don't leave the key blade on it) under the yokes near the ignition barrel. That way you'll be able to use any of your spare keys, disadvantage being your HISS won't work. Depends how much you need the immobiliser.
A bodge, but if it's a runaround/cheap bike then...
A bodge, but if it's a runaround/cheap bike then...
All Hondas come with two key min - if you didn't get a spare OP you should have been taking that up with the previous owner before buying it.
Quite how one loses the only ignition key they have for something is beyond me.
To code a new key with HISS you need at least one working key DOH!
For those posting that clearly don't understand HISS.. it has a chip in the key the ECU has a chip reader round the top of the ignition barrel. You can cut new keys replace ignition barrels locksets all you want it still not gonna start the bike with out one of the two coded keys/chips!!
Doing it officially its a new ECU job as no doubt the OP is already aware.
If you google lost both HISS keys it might throw up some alternative but less that official options that appear to cost less.
Quite how one loses the only ignition key they have for something is beyond me.
To code a new key with HISS you need at least one working key DOH!
For those posting that clearly don't understand HISS.. it has a chip in the key the ECU has a chip reader round the top of the ignition barrel. You can cut new keys replace ignition barrels locksets all you want it still not gonna start the bike with out one of the two coded keys/chips!!
Doing it officially its a new ECU job as no doubt the OP is already aware.
Edited by sjtscott on Wednesday 16th August 16:47
If you google lost both HISS keys it might throw up some alternative but less that official options that appear to cost less.
Edited by sjtscott on Wednesday 16th August 16:49
Thanks for the helpful replies, folks. Including telephone number of a 'man who can'.
Yes, usually I'd like more than one key, but at my financial end of the market I can't be too picky, Mr Scott.
Yes, usually I'd like more than one key, but at my financial end of the market I can't be too picky, Mr Scott.
cbmotorsport said:
If you find it OP, get a few spares cut
I obviously would have got a spare or two, but as I bought it 48 hours before losing the key, i didn't have chance. Surely the cheapest solution would be to, wonder into your local town centre, accost the first chav on a scoot you see and ask him very nicely if he could fire it up for you. Best case scenario, he pokes it a couple of times with his trusty screwdriver and it springs into life, worst case scenario it disappears 6 hours later and you get a new ignition system courtesy of your friendly insurance co. after aforementioned chav has showed it off to his mates/girlfriend/mum. 

Gassing Station | Biker Banter | Top of Page | What's New | My Stuff



haha. 