FJR probs
Author
Discussion

mikal83

Original Poster:

5,340 posts

283 months

Friday 18th August 2017
quotequote all
Going on a long journey on mon so took the dust cover off, turned it over, started OK but a bit flat, connected the batter charger and a day later, turned it over..................

The gauges swung back as they do but on pressing the start button an electronic grating noise came from behind the gauges area, or just under them, the gauges also swung around and back and that was it????

Helllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllp

2001 26k on the clock.

I really really don't want to drive thru feckin Dorset and Hants in summer, on Monday, in my car.

The battery is fine holding 13.8 V lights are full brilliance, but its a ratchety grating noise deffo from around the gauges area.

Edited by mikal83 on Friday 18th August 14:58

graham22

3,328 posts

236 months

Friday 18th August 2017
quotequote all
Random - haven't they got a power screen? Cover on too tight/heavy causing screen motor to reset?

Can't think of anything else mechanical in that area of the bike.

Edited by graham22 on Friday 18th August 16:03

trickywoo

14,282 posts

261 months

Friday 18th August 2017
quotequote all
Despite you thinking your battery is fine I'd check it again.

Not sure what you mean by holding 13.8v. It should be 12.4 to 12.6 ish static. If you are measuring it straight off the charger you won't get a true indication of its condition. Even holding 12.6 static isn't a full indication of its condition.

mikal83

Original Poster:

5,340 posts

283 months

Friday 18th August 2017
quotequote all
I'm thinking battery solenoid , so will swap batteries tomorrow.....the second post.....WTF?

herewego

8,814 posts

244 months

Friday 18th August 2017
quotequote all
What you refer as a grating noise could be a chattering relay.

graham22

3,328 posts

236 months

Friday 18th August 2017
quotequote all
mikal83 said:
I'm thinking battery solenoid , so will swap batteries tomorrow.....the second post.....WTF?
Was serious trying to help, I don't know if these, with electrically adjustable screens, try to return to their setting electronically if manually moved otherwise. Just enough power for power screen motor to try working but not enough to start.

As I said, nothing else like to make a noise behind the dash, I guess starter solenoid will be under seat or nearer area of battery & starter motor not behind the dash.

mikal83

Original Poster:

5,340 posts

283 months

Friday 18th August 2017
quotequote all
Starter motor usually connected to the engine, screen goes back to low position on swithching off. I have a frsh batt on charge and will clean all L connectors to relays in the morning.............cricket now with a martini, far more important.