Shortening wheelbase on Triumph Sreet Triple R
Shortening wheelbase on Triumph Sreet Triple R
Author
Discussion

cmaguire

Original Poster:

3,589 posts

140 months

Saturday 19th August 2017
quotequote all
Just wondering if anyone has done this and if it was positive or negative.

The rear wheel slot in the swingarm would easily allow this so shortening the chain by a link would probably shorten the wheelbase by around 15mm. I think this is the case with the equivalent Daytona, and that the chain-length and therefore wheelbase is increased for the ST exactly this way.

It's a 2012 bike, so effectively the original version.

Birky_41

4,667 posts

215 months

Saturday 19th August 2017
quotequote all
Cant see any reason you'd want to do this unless you are unhappy with the handling?

We used to do it on my race bikes many years ago. Shorter wheelbase supposedly sharpened handling and made it a bit more skittish

Cant see I've ever tried or done it on the road. I dont hang about and would be surprised if I noticed a difference for road riding

Jazoli

9,707 posts

281 months

Saturday 19th August 2017
quotequote all
Why would you want to? it's one of the sharpest handling bikes there is, the weight distribution on the daytona is very different due to the riding position, I'm sure Triumph have lengthened the wheelbase on the str for a very good reason. smile

Edited by Jazoli on Saturday 19th August 16:53

cmaguire

Original Poster:

3,589 posts

140 months

Saturday 19th August 2017
quotequote all
Jazoli said:
Why would you want to? it's one of the sharpest handling bikes there is, the weight distribution on the daytona is very different due to the riding position, I'm sure Triumph have lengthened the wheelbase on the str for a very good reason. smile

Edited by Jazoli on Saturday 19th August 16:53
It doesn't have anything in the way of bar end weights by the looks of it (unless they are internal to the bars, and isn't a twitchy bike at all, so it strikes me as something that could be done for gain with potentially no negatives, as it would only be restoring the wheelbase back to the length of the donor Daytona bike anyway.

Financial cost £0. Or new chain if it's st.

Gavia

7,627 posts

122 months

Saturday 19th August 2017
quotequote all
cmaguire said:
It doesn't have anything in the way of bar end weights by the looks of it (unless they are internal to the bars, and isn't a twitchy bike at all, so it strikes me as something that could be done for gain with potentially no negatives, as it would only be restoring the wheelbase back to the length of the donor Daytona bike anyway.

Financial cost £0. Or new chain if it's st.
What gain?

Lengthening a wheelbase on a twitchy bike I can understand, as I did that recently to my trackbike and it was a revelation. Can't see any value in shortening it at all.

Loyly

18,295 posts

190 months

Saturday 19th August 2017
quotequote all
Jazoli said:
Why would you want to? it's one of the sharpest handling bikes there is, the weight distribution on the daytona is very different due to the riding position, I'm sure Triumph have lengthened the wheelbase on the str for a very good reason. smile

Edited by Jazoli on Saturday 19th August 16:53
This. Just because you can, should you? The Street Triple handles like a dream anyway.

cmaguire

Original Poster:

3,589 posts

140 months

Saturday 19th August 2017
quotequote all
Loyly said:
This. Just because you can, should you? The Street Triple handles like a dream anyway.
Why modify anything if it's all great?

If nobody did anything unless some 'guru' ensured them it was some kind of revelation then virtually all bikes would remain standard.
You could just as easily ask why my work van has Pilot Sport 4s, a Whiteline ARB, a hybrid turbo and a tuning box on it.

The Street Triple isn't exactly razor-sharp on the steering front anyway,it's 'toned' down relative to the Daytona.

Gavia

7,627 posts

122 months

Saturday 19th August 2017
quotequote all
cmaguire said:
Why modify anything if it's all great?

If nobody did anything unless some 'guru' ensured them it was some kind of revelation then virtually all bikes would remain standard.
You could just as easily ask why my work van has Pilot Sport 4s, a Whiteline ARB, a hybrid turbo and a tuning box on it.

The Street Triple isn't exactly razor-sharp on the steering front anyway,it's 'toned' down relative to the Daytona.
Why has your work van got all those things on it? Why not just buy a decent van in the first place?

cmaguire

Original Poster:

3,589 posts

140 months

Saturday 19th August 2017
quotequote all
Gavia said:
Why has your work van got all those things on it? Why not just buy a decent van in the first place?
What is a decent van?

SAS Tom

3,755 posts

205 months

Saturday 19th August 2017
quotequote all
I shortened the wheelbase on my Thunderace due to a change in the size of sprockets. It was probably about an inch shorter but I couldn't tell a difference. Just like I can't tell the difference dropping forks through yokes. Try it if you want, it's hardly going to be a massive change.

cmaguire

Original Poster:

3,589 posts

140 months

Saturday 19th August 2017
quotequote all
SAS Tom said:
I shortened the wheelbase on my Thunderace due to a change in the size of sprockets. It was probably about an inch shorter but I couldn't tell a difference. Just like I can't tell the difference dropping forks through yokes. Try it if you want, it's hardly going to be a massive change.
Effectively, a few people will be doing this by down-gearing with a larger rear sprocket only but most swingarms don't allow much movement.
The STR however has a very long slot relative to most bikes.

T6 vanman

3,570 posts

130 months

Saturday 19th August 2017
quotequote all
cmaguire said:
Gavia said:
Why has your work van got all those things on it? Why not just buy a decent van in the first place?
What is a decent van?
Ah-hum smile

Gavia

7,627 posts

122 months

Saturday 19th August 2017
quotequote all
T6 vanman said:
cmaguire said:
Gavia said:
Why has your work van got all those things on it? Why not just buy a decent van in the first place?
What is a decent van?
Ah-hum smile
Exactly some very nice standard T6s and Vitos out there.

cmaguire

Original Poster:

3,589 posts

140 months

Saturday 19th August 2017
quotequote all
anonymous said:
[redacted]
Simply shorten the chain, which will take the rear wheel forward without changing the gearing at all.
It'll drop the rear a fraction but next to nothing.
I just measured it and the slot isn't necessarily longer than normal at 7cm, but the starting point for the wheel with new chain is a lot further back than normal.
On my other bike if you moved the rear wheel forward it would go 2.5cm max (the spindle is in the middle of the slot) whereas on the STR it can move forwards 4.5 cm.

cmaguire

Original Poster:

3,589 posts

140 months

Saturday 19th August 2017
quotequote all
Gavia said:
Exactly some very nice standard T6s and Vitos out there.
Don't get round corners very quick

Gavia

7,627 posts

122 months

Saturday 19th August 2017
quotequote all
cmaguire said:
Don't get round corners very quick
Of course they don't.

cmaguire

Original Poster:

3,589 posts

140 months

Saturday 19th August 2017
quotequote all
Gavia said:
Of course they don't.
They don't.

curlie467

7,650 posts

232 months

Sunday 20th August 2017
quotequote all
If you really want to try it then change the gearing (beg steal or borrow a rear sprocket).
You won't be buggering about with the chain and get the added benefit of the better acceleration.

Shortening the wheelbase isn't always a win win situation, there can be downsides and just because it makes sense in your head doesn't mean it will translate to the bikes feeling.
Too many variables to add when on the road, on track it would be more obvious and worthwhile.