Changing your own tyres
Discussion
I'm considering changing my own tyres and am wondering if there is anyone on here that has a DIY tyre change set up. I'm aware of most of the equipment needed including a bead breaker and tyre levers and just asking to see what other essential or helpful equipment I can buy. I'm doing this purely out of my own interest and amusement, I realise it is far easier and cheaper in the short term to go to a tyre place but I like a little project and I don't use my bike to commute so there's no urgency or rush to get them changed.
Thanks.
Thanks.
I do mine. You'll need a static balancer as well and a few weights etc.
Removal - I break the beads and then cut the tyre sidewall, tyre just falls off. I find 190 rears a bit of wrestle to get off. Doable but easier to cut off.
Fitting is easy. Get some proper tyre lube and they almost fall on.
I use local petrol station airline to seal the new beads.
If you've got tyre warmers use them before fitting the new ones, otherwise store them in the house for a bit to warm them up.
Stone cold rubber is hard to fit.
Removal - I break the beads and then cut the tyre sidewall, tyre just falls off. I find 190 rears a bit of wrestle to get off. Doable but easier to cut off.
Fitting is easy. Get some proper tyre lube and they almost fall on.
I use local petrol station airline to seal the new beads.
If you've got tyre warmers use them before fitting the new ones, otherwise store them in the house for a bit to warm them up.
Stone cold rubber is hard to fit.
Edited by DuraAce on Wednesday 6th September 17:36
I do my own, a bead breaker, balancer and levers soap and weights should cost no more than £100 all in, its quite easy although very easy to damage your rims, I have recently started using the large cable tie method and it means there's little chance of any damage.
You also need a compressor, I have got most things seated with a either my £30 ECP mini compressor or local morrisons forecourt one but struggled with michelins, a decent 50 litre compressor will seat almost anything.
Its not really the cost saving, as I've probably saved £200 all in, its the convenience, I have one bike garage within 20 miles, if you have a good supply of scrubs its very cost effective mind.
You also need a compressor, I have got most things seated with a either my £30 ECP mini compressor or local morrisons forecourt one but struggled with michelins, a decent 50 litre compressor will seat almost anything.
Its not really the cost saving, as I've probably saved £200 all in, its the convenience, I have one bike garage within 20 miles, if you have a good supply of scrubs its very cost effective mind.
Edited by Jazoli on Wednesday 6th September 17:34
Yep I change my own. Just put a new wet on in case I need it at donington.
Essentials are a valve core tool, bead breaker, rim protectors, tyre levers and tyre soap. I have used fairy liquid but seems to dry out fairly quickly. Getting the last bit of the bead over the rim can be a right t
t of a job. Also now is the time to change the valve as well if you feel it's necessary.
If you are balancing them yourself then you will need a balancer(obviously), some weights and some patience.
For the cost of it though, mine has paid for itself many times over!
Essentials are a valve core tool, bead breaker, rim protectors, tyre levers and tyre soap. I have used fairy liquid but seems to dry out fairly quickly. Getting the last bit of the bead over the rim can be a right t
t of a job. Also now is the time to change the valve as well if you feel it's necessary.If you are balancing them yourself then you will need a balancer(obviously), some weights and some patience.
For the cost of it though, mine has paid for itself many times over!
Cue lots of people who have "a chap" who fits a pair of tyres for £5 at the drop of a hat and gives a free reach around!
Nobody near me will fit them for less than £10 per tyre (to loose wheels). Often they won't fit tyres they haven't supplied, if they will they take ages to do them. 2 or 3 pairs a year fitted at home, and a few for friends adds up to a good saving. Kit has already paid for itself for us.
Nobody near me will fit them for less than £10 per tyre (to loose wheels). Often they won't fit tyres they haven't supplied, if they will they take ages to do them. 2 or 3 pairs a year fitted at home, and a few for friends adds up to a good saving. Kit has already paid for itself for us.
I was considering this Abba kit just recently which gives you pretty much everything you need in one smart package...
http://www.abbastands.co.uk/product-detail.asp?pid...
http://www.abbastands.co.uk/product-detail.asp?pid...
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff



