Yamaha R1 14B owners (Big Bang)
Discussion
Since I bought the R1 I've not been a massive fan of the suspension ... as I came from a Fireblade I assumed it was all in my head and I will have got used to it ... after over 1000 miles in the seat and the opportunity to pedal it along on some nice roads I reckon there is room for improvement ... in fact it's the only thing I dislike about the bike.
The front feels too soft and under trail braking it feels as though the bike is badly unsettled ... accelerating and braking is making the bike buck forwards and backwards a lot ... my tell tale on the forks is showing I'm using pretty much all the fork travel which is surprising given I've not taken it on track yet ... the blade always had plenty left! Mid corner the bike just doesn't feel settled over bumps ...
The preload is currently wound out to max .. so at 14 stone it seems I need new springs despite lots of fiddling by both myself and a suspension tuner.
Do these bikes run soft springs as standard?
I know I'm picky but it's got to the point I'm considering calling it a day and buying something else!
The front feels too soft and under trail braking it feels as though the bike is badly unsettled ... accelerating and braking is making the bike buck forwards and backwards a lot ... my tell tale on the forks is showing I'm using pretty much all the fork travel which is surprising given I've not taken it on track yet ... the blade always had plenty left! Mid corner the bike just doesn't feel settled over bumps ...
The preload is currently wound out to max .. so at 14 stone it seems I need new springs despite lots of fiddling by both myself and a suspension tuner.
Do these bikes run soft springs as standard?
I know I'm picky but it's got to the point I'm considering calling it a day and buying something else!
Mr OCD said:
Biker's Nemesis said:
I had k tech springs for my weight and a revalved rear shock.
Preload wound out to max?
Thanks John. Preload wound out to max?
Yes, the front forks are wound out to max preload to try and control the front. A few people have said the springs are progressive which I assume doesn't help.
Side effect is more preload raises the ride height as well which can make the bike feel weird.
if it's control you want you need to be looking at the spring value together with comp & rebound adjustment as well as oil viscosity and air gap.
So start by determining where the clickers are set out of the max value......
Mr OCD said:
Biker's Nemesis said:
I had k tech springs for my weight and a revalved rear shock.
Preload wound out to max?
Thanks John. Preload wound out to max?
Yes, the front forks are wound out to max preload to try and control the front. A few people have said the springs are progressive which I assume doesn't help.
In any event, by significantly upping the preload you will also have altered the behaviour of the damping.
As Steve has said, no mention of damping settings?
Anyway, first port of call should be sag. Can you get close with existing spring on the rear? I would think the forks should be possible. I doubt at 14 stone you need anywhere near max preload on the forks, and adding lots of preload to the forks often makes the bike feel bloody awful under acceleration and lean.
Steve Bass said:
Preload will do nothing to control the suspension unit. Only affects the initial force required to move the unit......although with more preload you're making the spring push back from a more compressed state so you need to adjust the C&R to compensate.
Side effect is more preload raises the ride height as well which can make the bike feel weird.
if it's control you want you need to be looking at the spring value together with comp & rebound adjustment as well as oil viscosity and air gap.
So start by determining where the clickers are set out of the max value......
'Side effect is more preload raises the ride height as well which can make the bike feel weird.
if it's control you want you need to be looking at the spring value together with comp & rebound adjustment as well as oil viscosity and air gap.
So start by determining where the clickers are set out of the max value......
Hi Steve - wondered when you would drop in.

I remember from our previous conversations regarding preload and height, but it does seem with max pre-load on the forks dialled in the suspension is working better which I assume is due to being in the 'working range' as opposed to the bottom of the fork travel? However, despite this you are right the bike does feel a bit weird due to increase in height.
Standard springs are 9's ... I've been recommended 10's.
You are correct - I want better suspension control I'm after.
cmaguire said:
I think he is querying your use of the word 'out' rather than 'in'. As 'out' reduces pressure on the spring and lessens preload on any forks I've ever seen.
In any event, by significantly upping the preload you will also have altered the behaviour of the damping.
As Steve has said, no mention of damping settings?
Anyway, first port of call should be sag. Can you get close with existing spring on the rear? I would think the forks should be possible. I doubt at 14 stone you need anywhere near max preload on the forks, and adding lots of preload to the forks often makes the bike feel bloody awful under acceleration and lean.
On the 14B forks ... preload is a bit weird ... you wind it in to increase but the fork drops down to reveal more rings like so... In any event, by significantly upping the preload you will also have altered the behaviour of the damping.
As Steve has said, no mention of damping settings?
Anyway, first port of call should be sag. Can you get close with existing spring on the rear? I would think the forks should be possible. I doubt at 14 stone you need anywhere near max preload on the forks, and adding lots of preload to the forks often makes the bike feel bloody awful under acceleration and lean.

I'll go back and record all the settings tonight. I was lazy this time round and got suspension guys to set it up.

The OE fork springs are 9's apparently ... rear shock spring is 10.
Adding loads of preload up front has made the bike feel better not worse. With it in the mid-range area I was pretty much using all the available fork travel!
Back to the beginning and start again.

Prof Prolapse said:
Can you not drop the forks to compensate for the pre-load? That should allow you to return to "better" geometry...
Proper suspension set up, then new springs as required seems the sensible thing... Not that I claim to be knowledgeable about these things.
For the height you mean?Proper suspension set up, then new springs as required seems the sensible thing... Not that I claim to be knowledgeable about these things.
Apparently the belly pan scrapes easily on these bikes so its not advised. It's probably better to raise the rear?
You rang...

From that picture, the preload is would out meaning there's the minimum applied. I wouldn't recommend this....
As a starting point, count the turns from fully out to fully in and then come back to approx. half way.
Once you've done that, enlist a friend and do a proper sag measurement and adjustment. In simple terms, you want the reading with you on it to be 35 to 40mm less than the fully extended value. So (for example) if you measure 120mm if available stroke with the forks fully extended, aim for 80 to 90mm of stroke with you (fully kitted) on board. Same for the back end.
The set the comp to half way and the rebound to 2/3rd out from fully in. Always work from fully in btw, NEVER from fully out when adjusting C&R.
As long as the sag is in the right zone, for road riding you'll be close enough. Go out on a longish ride and take a screwdriver to make (SMALL!!) adjustments to the C or R as you feel. ONLY adjust 1 at a time and only by 1 click or 1/4 turn and retry.
And don't start lifting or lowering the bike willy nilly. It truly screws with the geometry and can have serious effects despite feeling good initially.
Bike suspension is always a compromise between stability, agility and turn in.
I'll pop my invoice in the post

Edited by Steve Bass on Thursday 7th September 11:28
Steve Bass said:
From that picture, the preload is would out meaning there's the minimum applied. I wouldn't recommend this....
As a starting point, count the turns from fully out to fully in and then come back to approx. half way.
Once you've done that, enlist a friend and do a proper sag measurement and adjustment. In simple terms, you want the reading with you on it to be 35 to 40mm less than the fully extended value. So (for example) if you measure 120mm if available stroke with the forks fully extended, aim for 80 to 90mm of stroke with you (fully kitted) on board. Same for the back end.
The set the comp to half way and the rebound to 2/3rd out from fully in. Always work from fully in btw, NEVER from fully out when adjusting C&R.
As long as the sag is in the right zone, for road riding you'll be close enough. Go out on a longish ride and take a screwdriver to make (SMALL!!) adjustments to the C or R as you feel. ONLY adjust 1 at a time and only by 1 click or 1/4 turn and retry.
I'll pop my invoice in the post
I thought that ... but checking the manual that is on maximum As a starting point, count the turns from fully out to fully in and then come back to approx. half way.
Once you've done that, enlist a friend and do a proper sag measurement and adjustment. In simple terms, you want the reading with you on it to be 35 to 40mm less than the fully extended value. So (for example) if you measure 120mm if available stroke with the forks fully extended, aim for 80 to 90mm of stroke with you (fully kitted) on board. Same for the back end.
The set the comp to half way and the rebound to 2/3rd out from fully in. Always work from fully in btw, NEVER from fully out when adjusting C&R.
As long as the sag is in the right zone, for road riding you'll be close enough. Go out on a longish ride and take a screwdriver to make (SMALL!!) adjustments to the C or R as you feel. ONLY adjust 1 at a time and only by 1 click or 1/4 turn and retry.
I'll pop my invoice in the post




Thank you sir. I will do it all tonight and record everything first!
Edited by Mr OCD on Thursday 7th September 11:31
Edited by Mr OCD on Thursday 7th September 11:33
Mr OCD said:
cmaguire said:
I think he is querying your use of the word 'out' rather than 'in'. As 'out' reduces pressure on the spring and lessens preload on any forks I've ever seen.
In any event, by significantly upping the preload you will also have altered the behaviour of the damping.
As Steve has said, no mention of damping settings?
Anyway, first port of call should be sag. Can you get close with existing spring on the rear? I would think the forks should be possible. I doubt at 14 stone you need anywhere near max preload on the forks, and adding lots of preload to the forks often makes the bike feel bloody awful under acceleration and lean.
On the 14B forks ... preload is a bit weird ... you wind it in to increase but the fork drops down to reveal more rings like so... In any event, by significantly upping the preload you will also have altered the behaviour of the damping.
As Steve has said, no mention of damping settings?
Anyway, first port of call should be sag. Can you get close with existing spring on the rear? I would think the forks should be possible. I doubt at 14 stone you need anywhere near max preload on the forks, and adding lots of preload to the forks often makes the bike feel bloody awful under acceleration and lean.

I'll go back and record all the settings tonight. I was lazy this time round and got suspension guys to set it up.

The OE fork springs are 9's apparently ... rear shock spring is 10.
Adding loads of preload up front has made the bike feel better not worse. With it in the mid-range area I was pretty much using all the available fork travel!
Back to the beginning and start again.

Anyhow, the whole show starts with static and rider sag.
If these aren't in the ball park you're wasting your time by polishing a turd.
Has someone perhaps already changed springs on your bike?
Mr OCD said:
I thought that ... but checking the manual that is on maximum 
Thank you sir. I will do it all tonight and record everything first!
The Japanese use odd terms like "Tension" etc so be wary. Simple way to be sure.... The further into or sunken into the fork leg that adjuster is, the more preload you have.
Thank you sir. I will do it all tonight and record everything first!
From the first picture... righty (a) is tighty
Lefty (b) is looseyBasically, the further out the preload adjuster is, the less static compression is being applied to the spring. In your case, the least possible.
Now you've also made 2 contradictory statements. The springs are either 9's (linear rate) or progressive. Can't be both. And the Japanese have a habit of using progressive as it caters for a wider audience.
If progressive, you WILL find the right sag setting regardless of weight as the springs stiffen as they compress. Linear won't and a 9 might not be right. But for road use I'd wager a bag of pickled onion Monster Munch you'll be fine. Road wants a more compliant ride. For example, I run 10's in my race bike and they're pretty stiff.
Other things that can fudge the picture is excessive diving can make you think they're too soft whereas it might actually be the rear shock rebound being too fast and propelling the rear up as you brake which pitches the front.... Often, if you think there's a problem at one end, it's cause is at the other...
Edited by Steve Bass on Thursday 7th September 11:36
cmaguire said:
More rings showing and more preload is a bit weird.
Anyhow, the whole show starts with static and rider sag.
If these aren't in the ball park you're wasting your time by polishing a turd.
Has someone perhaps already changed springs on your bike?
Yep, I thought the same and had to check the manual twice to ensure I wasn't being thick!Anyhow, the whole show starts with static and rider sag.
If these aren't in the ball park you're wasting your time by polishing a turd.
Has someone perhaps already changed springs on your bike?
static sag was 10mm rear, 22mm front from memory. I'll double check tonight along with rider sag.
I doubt the springs have been changed. It's a one owner bike with 3000 miles and I see no evidence in the history file which has every other receipt. I'm not saying it isn't possible though.
Mr OCD said:
Yep, I thought the same and had to check the manual twice to ensure I wasn't being thick!
static sag was 10mm rear, 22mm front from memory. I'll double check tonight along with rider sag.
I doubt the springs have been changed. It's a one owner bike with 3000 miles and I see no evidence in the history file which has every other receipt. I'm not saying it isn't possible though.
10 to 14mm static sag on the rear is OK. what rider sag have you got, that'll tell you if the spring is right for you?static sag was 10mm rear, 22mm front from memory. I'll double check tonight along with rider sag.
I doubt the springs have been changed. It's a one owner bike with 3000 miles and I see no evidence in the history file which has every other receipt. I'm not saying it isn't possible though.
Steve Bass said:
The Japanese use odd terms like "Tension" etc so be wary.
Basically, the further out the preload adjuster is, the less static compression is being applied to the spring. In your case, the least possible.
Now you've also made 2 contradictory statements. The springs are either 9's (linear rate) or progressive. Can't be both. And the Japanese have a habit of using progressive as it caters for a wider audience.
If progressive, you WILL find the right sag setting regardless of weight as the springs stiffen as they compress. Linear won't and a 9 might not be right. But for road use I'd wager a bag of pickled onion Monster Munch you'll be fine. Road wants a more compliant ride. For example, I run 10's in my race bike and they're pretty stiff.
Other things that can fudge the picture is excessive diving can make you think they're too soft whereas it might actually be the rear shock rebound being too fast and propelling the rear up as you brake which pitches the front.... Often, if you think there's a problem at one end, it's cause is at the other...
Thanks Steve. That helps ... the R1 forum guys say they are progressive springs which can feel a little harsh at the first point of travel and hence they recommend linear springs make a big difference. Racetech say the OE spring rate is 9.2. I had 10's in the Fireblade and although firm felt fine on the road.Basically, the further out the preload adjuster is, the less static compression is being applied to the spring. In your case, the least possible.
Now you've also made 2 contradictory statements. The springs are either 9's (linear rate) or progressive. Can't be both. And the Japanese have a habit of using progressive as it caters for a wider audience.
If progressive, you WILL find the right sag setting regardless of weight as the springs stiffen as they compress. Linear won't and a 9 might not be right. But for road use I'd wager a bag of pickled onion Monster Munch you'll be fine. Road wants a more compliant ride. For example, I run 10's in my race bike and they're pretty stiff.
Other things that can fudge the picture is excessive diving can make you think they're too soft whereas it might actually be the rear shock rebound being too fast and propelling the rear up as you brake which pitches the front.... Often, if you think there's a problem at one end, it's cause is at the other...
But from what you have said I'm going to record everything as it is now and do what you have suggested this evening and go from there. I don't mind changing the springs as its a cheap job but not if I don't need too!

Appreciate the feedback. It shouldn't be hard to make a bike like this handle properly!

Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


