Aprilia Tuono (circa 2005)
Aprilia Tuono (circa 2005)
Author
Discussion

smiles1

Original Poster:

544 posts

253 months

Wednesday 27th September 2017
quotequote all
Does anyone own or has owned an Aprilia Tuono?

I'm currently looking at a few ranging from 2005-2007 and trying to get an idea on what it is like to own?

Thanks

spareparts

6,796 posts

258 months

Wednesday 27th September 2017
quotequote all
Awesome bikes. Watch the oil level. Watch the electrics. Rotax motor superb. One of the most enjoyable bikes I've had. My 2009 'Black Dream' Factory -



Edited by spareparts on Wednesday 27th September 21:14

anonymous-user

85 months

Wednesday 27th September 2017
quotequote all
I had one when they first came out in 2006. Came with a smaller sproket you could fit to make the gearing shorter. Also had Akrapovics.

Kept it for about 4 months before getting rid of it. It was fun when in the mood for hooliganism but hard work when I wasn't.

Chopped it in for a ZX12R which I loved.

patchb

1,004 posts

145 months

Wednesday 27th September 2017
quotequote all
As Spareparts said above really. I've had mine for 18 months now which is the longest I've ever owned a vehicle so that's saying something! The only thing that I've had wrong with mine was the speedo sensor went after a week of ownership so I was unable to start the bike. Had it replaced under warranty and had the bike back within 2 days.
Mines a 2009 and the colour scheme is called Code Orange which is very rare.

Tuono by patrick burrows

patchb

1,004 posts

145 months

Wednesday 27th September 2017
quotequote all
Oh yeah, it's normal for the clutch fluid to go black quickly so not a cause for concern. An uprated slave cylinder can be fitted to stop this and also makes the clutch lighter. I don't personally find the clutch at all heavy with the stock slave cylinder.

Tall_Paul

1,915 posts

258 months

Thursday 28th September 2017
quotequote all
I've had this one a year now, awesome, awesome bike. Mine's also a black dream, which is the 2009 final year colour scheme of the factory models. Before this was the red and white 'Red lion' paint scheme.

2006 onwards is the Gen 2 model as we've all posted.




Get a factory model if you can (and don't mind the gold frame!), the ohlins, forged wheels and lashings of carbon is worth about £2-2.5k if you bought them seperately (if you can find them!) but they only cost £1-1.5k more than the R model.

I've had a couple of issues - fuel pump failure and cracked ohlins fork bottom (by the pinch bolts) but it'll be fixed and back on the road for spring. They handle like a fly and have bags of torque, 86ftlb and 139bhp which is night on perfect for the road. Brakes on the factory model are the 4 pad Brembos (2 pad brembos on the R models expect for the 2006 year bikes), bags of power and tones of feel. Fuelling is spot on being a refined FI system with actual cables, no fly by wire. No ABS, TCS, nothing.

Get the gearing set to 15/42 from the stock 16/40 if it's not already been done, makes it much nicer at slow speeds and just as good on the motorway. Top speed is still 140+. I've commuted on mine and although it feels like a caged lion it wasn't unbearable. They do need to be set free on the open road though biggrin

One of the best feelings on them is to come out of a 90 degree bend cranked over, and as you're coming back upright feeding on the power from about 4k rpm, the wave of torque slingshots you out the corner. biggrin I'm rarely above 7k rpm, there's just no need.

Oil level is checked when the bike is fully warmed up, so can be tricky.

There are a few common issues to check, mainly around the wiring, stator issues, brown connectors, sprag clutch if the battery isn't strong (being a v-twin they need a strong battery to turn over), the ohlins lowers cracking if overtorqued, dog bones drying out from lack of maintenence, no rear brake due to the master cylinder being horizontal and next to the engine (you'll see mine has AP rearsets which solve this), the tank will swell when you use fuel with ethanol (mine is in the airing cupboard drying out and shrinking down!), but overall the engines are solid and they're built very well. A lot of issues have been fixed by the 08/09 model so best buying a late one if you can. Oh yeah and the sidestands are crap, get a honda fireblade stand to replace it, common thing to swap.

£5k will get you an 08 factory model. If you want a factory model and want a breakdown of which years came with which wheels and the different coloured frames let me know, there were 2 frame colours, 2 wheel colours and 3 different paint schemes across the 2006/2007/2008/2009 factory models biggrin

speckledspaniard

48 posts

128 months

Thursday 28th September 2017
quotequote all
i had an 05 gen 1 - really liked it to begin with, great fun and sounds awesome. handled pretty well. developed a fault that made it slightly miss / cut out whenever hitting a pot hole or hard bump in the road. After much fettling, changing and checking everything on the bike we couldn't find the root of the problem so i flogged it - am currently looking at a gen 2

what's the power like on the gen 2? is it lighter than the first generation? also, how comfortable is it compared to first (those that have ridden both models)?

Tall_Paul

1,915 posts

258 months

Thursday 28th September 2017
quotequote all
I've not ridden a gen1 but they're meant to be a bit more 'brutal' than the gen2 which is smoother.

Harry H

3,765 posts

187 months

Thursday 28th September 2017
quotequote all
I bought a Factory Gen 2 new in 2006 and I've still got it. Many other bikes have come and gone in the last 11 years but the Tuono for me is a keeper.

Don't ride it as often as I should these days but every time I do I'm reminded of what great fun it is. As has been said before it's a bit of a pain on the commute as it's like holding back a race horse it just wants to go go go. Once the gearing is changed to 16/42 it'll lift the front in the first 3 gears off the throttle. So every set of lights is a little wheelie opportunity. It just makes you want to misbehave.

My planned exit form this world is 95 yrs of age on my Tuono being chased by police. Then crashing out in one big fireball. Assuming I can still buy petrol :-))

Had a Gen One before that was written off and the Gen 2 is a lot smoother round the edges. They're both as charming as each other just slightly different.

Rotax engine is bullet proof. Italian electrics can be troublesome but pop over to the Af1 forum, type in your symptoms and there's loads of people that'll tell you the fix which is usually pretty simple.

The rear brake won't work no matter what you try short of relocating the master cylinder.

Krikkit

27,941 posts

212 months

Thursday 28th September 2017
quotequote all
Harry H said:
The rear brake won't work no matter what you try short of relocating the master cylinder.
wobble How did they ever leave the factory like that? Brilliant.

patchb

1,004 posts

145 months

Thursday 28th September 2017
quotequote all
My rear brake works fine and my master cylinder is in the standard place. I do use my rear brake a fair bit though so maybe that keeps it good?? Saying that I've only done about 800 miles on the Tuono this year due to riding other bikes and the brake is still fine.

Harry H

3,765 posts

187 months

Thursday 28th September 2017
quotequote all
Oooh something I forgot.

The side stand is too long. Not the end of the world you may think but on my generation one...

Got a slow puncture, parked up, tyre deflated, bike sinks down so topples off side stand. All part of the charm that is Aprilia ownership.

Birky_41

4,661 posts

215 months

Thursday 28th September 2017
quotequote all
I never owned the Tuono V2 but had 2x RSV Mille's

I think they called it version 1 and 1.5? Had the ears on the front

Anyways rear brake worked fine - if you barely use it you may find it naff but I used mine loads

Engine was a peach. Had to check oil on the weird pipe on the left side once warm though.

Clutch was quite stiff and oil went black quick. Its not a revver, short shift and ride the torque for amazing drive

I never had a single issue with either of mine and did 10,000 miles on the first one and just under 5000 on the second one

Im guessing now they are pushing 10+ years old there will be some people that will have encountered other issues but I owned mine when they were at the time 2-4 years old

NITO

1,349 posts

237 months

Thursday 28th September 2017
quotequote all
I have a Gen 1, it's awesome, love it, rear brake works superbly but I also use it, front brakes are tremendous, fantastic torque and old school grunty raw feel to it with bags of character. Mine too is a keeper for me.






Edited by NITO on Thursday 28th September 20:54

smiles1

Original Poster:

544 posts

253 months

Thursday 28th September 2017
quotequote all
Thanks all really appreciate the replies and wasn't expecting such detail smile

Hopefully a test ride on Saturday!

anonymous-user

85 months

Thursday 28th September 2017
quotequote all
NITO said:
I have a Gen 1, it's awesome, love it, rear brake works superbly but I also use it, front brakes are tremendous, fantastic torque and old school grunty raw feel to it with bags of character. Mine too is a keeper for me.






Edited by NITO on Thursday 28th September 20:54
I really like that. First gen is still the best in my opinion.

NITO

1,349 posts

237 months

Thursday 28th September 2017
quotequote all
Thank you, that's the 2002 Launch edition, the 'Tuono RSV R Limited' developed to test the market for a streetfighter application using the full power Mille engine (with Aprilia Racing chip and can). 105 bikes were made in the first wave with a further 100 odd subsequently produced to meet demand, each individually numbered and sporting Ohlins, Carbon bodywork, OZ wheels and many low volume ergal and kevlar parts, my one is actually the second Tuono to enter the UK! The first being the press bike. Around 25 bikes came into the UK in total, 15 with the first wave then a further 10 later with the extended run.

In 2003 came the regular Tuono with about 20bhp less and sachs suspension etc. Then came the better known ohlins shod Tuono Racing in 2003 and the Factory in 2005. You'll rarely read or see anything on the stealthy R Limited which flies below radar, fortunately for me as it facilitated me getting back onto bikes after a forced 16 year hiatus with wifely consent wink !!

Edited by NITO on Thursday 28th September 23:06


Edited by NITO on Saturday 30th September 22:06

diddles

446 posts

230 months

Friday 29th September 2017
quotequote all
Krikkit said:
Harry H said:
The rear brake won't work no matter what you try short of relocating the master cylinder.
wobble How did they ever leave the factory like that? Brilliant.
This fix might have only applied to my bike (2008 Tuono Factory) however I think it's worth anyone with the same rear Brembo brake setup that suffers with poor rear brake performance to check this.

I carried out the official brake bleeding process - 3 times, however the rear brake was lasting no more than 4/500 miles before becoming spongy so decided further investigation needed.

On closer inspection I discovered that the brake reservoir had become slightly oval in shape ( I only spotted this after fully removing the reservoir as I suspected it might have had a hairline split). It was out of shape enough that the cap could not be forming a 100% seal and as such would have been letting in moisture.

Replaced with new reservoir and cap and rear brake has been perfect ever since.


Mine





.










Edited by diddles on Friday 29th September 04:24

NITO

1,349 posts

237 months

Friday 29th September 2017
quotequote all
Great advice there, there will be thousands of owners who that would help! I think it effects the Gen 2 more so. Does it warp with heat then, as there is a hestshield behind it? I know some have repositioned them to gppd effect.

As an aside for the OP, the V twins have tremendous engnie braking anyway so the moment you're off the gas you get a lot of engine braking, which feels quite freaky at first, especially when your last bike was a 2 stroke lol! It's quite a different feel, you either love it or hate it but even if it feels alien at first you grow to love it quickly, the low down thrust you get out of corners is quite something and the engine has to be among one of the most characterful powerplants around smile

Ps, with regards to the electronics someone mentioned earlier, my Tuono has been fine and I've fitted the larger YTX14 battery instead of a 12. They sell a bracket so you can install the larger battery as the big V twins suck a lot of juice to start. The issue with electronics is the rectifier is a shunt type and not so reliable. An easy fix is to replace with the mosfet type from a cbr600. The brown connectors corrode, there are two of them, on my Caponord adventure tourer which uses the same setup and engine, I have replace mine with th Honda rectifier and waterproof metripack 630 connectors in lieu of the brown connectors for long range peace of mind and it permanently cures the common electrical woes. It's a far bigger issue on the Caponord for some reaon. Gen1's could also use a higher amp solenoid, i think Aprilia superseded the part number later anyway for a 150A solenoid to aid with starting. I've not changed mine yet but it will be on the to do list eventually.




Edited by NITO on Friday 29th September 06:37

diddles

446 posts

230 months

Friday 29th September 2017
quotequote all
Yes, I assume the plastic of the reservoir had deformed through heat from the engine however I cant be 100% certain about that. It maybe just poor quality plastic reacting to brake fluid / wrong fluid used in the past / UV light etc. The plastic certainly looked degraded/brittle compared to the new replacement. Bike had around 13K miles at the time of replacement.