Tyres for mid range commuter
Discussion
My 07 Hornet has just passed its MOT with advisories for tyres and chain. So I am looking for a deal and can get Michelin Pilot Road 4's for £246 or Pilot Road 3's for £203.. is there much difference between the 2? The bike is used just for commuting 5 days a month into central london..
Also are there any alternative I should I be looking at, everywhere seems to put the PR's as the benchmark all round tyres.
cheers Jason.
Also are there any alternative I should I be looking at, everywhere seems to put the PR's as the benchmark all round tyres.
cheers Jason.
I found the difference negligible on a cbr1000rr so up to you.
I also found PR3 very cheap on https://www.tyreleader.co.uk/ a ferw months back/
I also found PR3 very cheap on https://www.tyreleader.co.uk/ a ferw months back/
The roadtec 01's are meant to be very good, they're more 'touring' and and should have as good/ better wet weather performance than the Angel GT, and the GT's are brilliant tyres.
I'm a Metzler fanboy, I've had the Angel GT's the past 3 times on my previous bikes, got the M7RR on my VFR at the moment. The Tuono will get a set of M7RRs on and the VFR will probably get swapped to either Angel GTs or Roadtec 01's when the M&RRs are done. The rear is on 5k miles and still has loads of life yet.
I'm a Metzler fanboy, I've had the Angel GT's the past 3 times on my previous bikes, got the M7RR on my VFR at the moment. The Tuono will get a set of M7RRs on and the VFR will probably get swapped to either Angel GTs or Roadtec 01's when the M&RRs are done. The rear is on 5k miles and still has loads of life yet.
Edited by Tall_Paul on Tuesday 3rd October 20:07
I normally use PR4's on my K1300S for my 150 mile per day commute and occasional trip to Europe. They're great tyres and I would (and do) happily recommend them for pretty much any use on the road. They grip well wet and dry and last (around 7000 to 8000 miles for me)
However, the last change of tyres was to Metzler Roadtec 01s, ready for my Old Gits trip to France in June. The turn in was better and the feel was excellent in both wet and dry. I managed to have enough fun as to completely remove the chicken strips. I was hooked ... until ...
When I got back and started the commute again I was devastated to find that the Metzlers really didn't handle white lines at all well, even in the dry. They wiggled and squirmed all over the place every time I crossed some paint, to the point of being really uncomfortable. They were significantly worse than the PR4s I'd used before so, after 7000 miles, when the Metzlers needed replacement, I went pack to PR4s.
However, the last change of tyres was to Metzler Roadtec 01s, ready for my Old Gits trip to France in June. The turn in was better and the feel was excellent in both wet and dry. I managed to have enough fun as to completely remove the chicken strips. I was hooked ... until ...
When I got back and started the commute again I was devastated to find that the Metzlers really didn't handle white lines at all well, even in the dry. They wiggled and squirmed all over the place every time I crossed some paint, to the point of being really uncomfortable. They were significantly worse than the PR4s I'd used before so, after 7000 miles, when the Metzlers needed replacement, I went pack to PR4s.
I actually preferred the PR3 over the PR4, they seemed more consistent in their response to me somehow.
Not that the PR4 is in any way a bad tyre, I just preferred the feel of the PR3.
Both tyres are amazing in the wet and gave enough grip for hooligan stuff in the dry. Lasted well too.
Not that the PR4 is in any way a bad tyre, I just preferred the feel of the PR3.
Both tyres are amazing in the wet and gave enough grip for hooligan stuff in the dry. Lasted well too.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff



