Salt on the roads
Discussion
What do you guys mean by 'salt on the roads' will corrode my bike? Is it that white stuff that's visible on my bike after a longish ride (in the cold months) - or are you guys talking about the actual gritting salt?
Sorry for such a newbie question.
If you don't mind answering another question - how do you apply ACF50 - I'm thinking to get the spray bottle version not the aerosol one.
Sorry for such a newbie question.
If you don't mind answering another question - how do you apply ACF50 - I'm thinking to get the spray bottle version not the aerosol one.
If it looks like a crusty spunk stain, it's salt, which you get once the roads have been gritted.
ACF50: A little goes a long way. I did my bikes at the weekend, spray on major pieces of the bike and then use a cloth to work it into the tighter areas. Be careful around brakes and tyres, it's slippery stuff.
ACF50: A little goes a long way. I did my bikes at the weekend, spray on major pieces of the bike and then use a cloth to work it into the tighter areas. Be careful around brakes and tyres, it's slippery stuff.
Rawwr said:
If it looks like a crusty spunk stain, it's salt, which you get once the roads have been gritted.
ACF50: A little goes a long way. I did my bikes at the weekend, spray on major pieces of the bike and then use a cloth to work it into the tighter areas. Be careful around brakes and tyres, it's slippery stuff.
I see the stains you're talking about ACF50: A little goes a long way. I did my bikes at the weekend, spray on major pieces of the bike and then use a cloth to work it into the tighter areas. Be careful around brakes and tyres, it's slippery stuff.
, but the roads haven't been gritted yet? KumiSinghs said:
Rawwr said:
If it looks like a crusty spunk stain, it's salt, which you get once the roads have been gritted.
ACF50: A little goes a long way. I did my bikes at the weekend, spray on major pieces of the bike and then use a cloth to work it into the tighter areas. Be careful around brakes and tyres, it's slippery stuff.
I see the stains you're talking about ACF50: A little goes a long way. I did my bikes at the weekend, spray on major pieces of the bike and then use a cloth to work it into the tighter areas. Be careful around brakes and tyres, it's slippery stuff.
, but the roads haven't been gritted yet? 
If you already have it on there chances are the bikes had atleast one winter and its already got to parts. Riding in all weathers including summer rain can start it a bit but there normally needs to be something on the ground to get it happening
I see bolts on my bike go furry and dull looking just from spring/summer riding
ACF50 is messy stuff I found but it does work. I put a rag over my brakes and tyres and then sprayed away to my hearts content
Birky_41 said:
KumiSinghs said:
Rawwr said:
If it looks like a crusty spunk stain, it's salt, which you get once the roads have been gritted.
ACF50: A little goes a long way. I did my bikes at the weekend, spray on major pieces of the bike and then use a cloth to work it into the tighter areas. Be careful around brakes and tyres, it's slippery stuff.
I see the stains you're talking about ACF50: A little goes a long way. I did my bikes at the weekend, spray on major pieces of the bike and then use a cloth to work it into the tighter areas. Be careful around brakes and tyres, it's slippery stuff.
, but the roads haven't been gritted yet? 
If you already have it on there chances are the bikes had atleast one winter and its already got to parts. Riding in all weathers including summer rain can start it a bit but there normally needs to be something on the ground to get it happening
I see bolts on my bike go furry and dull looking just from spring/summer riding
ACF50 is messy stuff I found but it does work. I put a rag over my brakes and tyres and then sprayed away to my hearts content
Cheers deary.
Pothole said:
Relax. The second word in the name if this forum is banter, a synonym for pisstaking.
Of course holmes, just trying figure it out. I don't wanna scratch my bike to bits whilst trying to looking after it. Thought as this forum has a *wealth* of experience why not ask here.
Make sure you get plenty of ACF-50 on the exhaust headers - it smells lovely
(no - it really does, and the resulting smoke plume is impressive)
Warm it first in hot water.
DO NOT wear your best clothes when applying it - it stains fabric good and proper.
You can apply it everywhere (except brakes!!) Plastics come up a treat, aluminium, inside electrical connectors etc.
If you get it on painted surfaces, it can be buffed to a shine. It hides scratches quite well.
If you get it on your brakes - your brakes will no longer work. It's not like they're a little worse than usual, they literally no longer work.
It does attract dust and dirt a little more than usual - but washing the bike is often easier as the dirt slips off.
You ideally need to get it everywhere water can get...under seat, behind the fairing etc.
It's good stuff.
(no - it really does, and the resulting smoke plume is impressive)Warm it first in hot water.
DO NOT wear your best clothes when applying it - it stains fabric good and proper.
You can apply it everywhere (except brakes!!) Plastics come up a treat, aluminium, inside electrical connectors etc.
If you get it on painted surfaces, it can be buffed to a shine. It hides scratches quite well.
If you get it on your brakes - your brakes will no longer work. It's not like they're a little worse than usual, they literally no longer work.
It does attract dust and dirt a little more than usual - but washing the bike is often easier as the dirt slips off.
You ideally need to get it everywhere water can get...under seat, behind the fairing etc.
It's good stuff.
Wait Here Until Green Light Shows said:
Make sure you get plenty of ACF-50 on the exhaust headers - it smells lovely
(no - it really does, and the resulting smoke plume is impressive)
Warm it first in hot water.
DO NOT wear your best clothes when applying it - it stains fabric good and proper.
You can apply it everywhere (except brakes!!) Plastics come up a treat, aluminium, inside electrical connectors etc.
If you get it on painted surfaces, it can be buffed to a shine. It hides scratches quite well.
If you get it on your brakes - your brakes will no longer work. It's not like they're a little worse than usual, they literally no longer work.
It does attract dust and dirt a little more than usual - but washing the bike is often easier as the dirt slips off.
You ideally need to get it everywhere water can get...under seat, behind the fairing etc.
It's good stuff.
Thank you!! I washed my bike yday, and applied ACF50 with a kitchen towel.
(no - it really does, and the resulting smoke plume is impressive)Warm it first in hot water.
DO NOT wear your best clothes when applying it - it stains fabric good and proper.
You can apply it everywhere (except brakes!!) Plastics come up a treat, aluminium, inside electrical connectors etc.
If you get it on painted surfaces, it can be buffed to a shine. It hides scratches quite well.
If you get it on your brakes - your brakes will no longer work. It's not like they're a little worse than usual, they literally no longer work.
It does attract dust and dirt a little more than usual - but washing the bike is often easier as the dirt slips off.
You ideally need to get it everywhere water can get...under seat, behind the fairing etc.
It's good stuff.
- I didn't take the fairings off - I may need to.
- I didn't apply to the electrics, so I'm gonna go to town on the dash
- I'll redo the header as you say.
- I'll unscrew the seat and go mad there too.
Ideally you want the bike totally dry before you apply ACF-50.
Spray a little in a cloth and use that to apply it to bolts and parts near the brakes.
In a month or so I will spend a good few hours washing, drying and then coating the bike for winter use.
Then don’t wash it off until spring. Bike looks awful, but when you do wash it off, underneath it will be as before you coated it.
Spray a little in a cloth and use that to apply it to bolts and parts near the brakes.
In a month or so I will spend a good few hours washing, drying and then coating the bike for winter use.
Then don’t wash it off until spring. Bike looks awful, but when you do wash it off, underneath it will be as before you coated it.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff




t I use the "2 Girls 1 cup" method.