Fitting USD forks to a CB1300
Fitting USD forks to a CB1300
Author
Discussion

powerstans

Original Poster:

353 posts

228 months

Monday 16th October 2017
quotequote all
Right not a total mechanical numpty but this is new territory to me.

I have bought back my old CB1300 off of the friend I sold it to. It was a good price and has an MOT with 2 advisories tyres and disks but having been parked outside for the last 18 months needs some TLC.

I am contemplating fitting some USD forks Hayabusa/Fireblade or similar, (really like the look of the Honda CB1100 concept) but am keen on any advice about what exactly is involved.

Billetbikebits do yokes that off set the shorter length of the forks, but ideally I would like to keep the ABS if possible. If this isn't is it best to purchase a full wheel and brakes set to suit the donor forks and would an electrical fix then be needed for the ECU?

If any one knows a build thread that would help this would be great.

Thanks

kurt535

3,560 posts

148 months

Monday 16th October 2017
quotequote all
Welcome back to the land of Torque.

I can't answer your q but would bet my last $ the people here know the answer:

http://cb1300.icyboards.net/index.php

gareth_r

6,791 posts

268 months

Tuesday 17th October 2017
quotequote all
Custom yokes would presumably be made with the standard offset in order to maintain the correct trail.

As far as the ABS is concerned, you would obviously need a way to mount the sensor, and I would imagine that the simplest solution would be to adapt the CB1300 wheel and calipers to fit the USD forks. If that isn't possible, then I guess you'd need to use the CB's ABS ring, or one just like it, and calipers with the same size and number of pistons.

obscene

5,180 posts

216 months

Tuesday 17th October 2017
quotequote all
Not sure if they would fit the yoke, but you can get the ABS Honda Hornet forks (09+ for more adjustment and 09-11 model years) from Italy very cheaply. I think I paid £250ish for the set and shipped. My documents say it was £375 for the front forks and front wheel if you do a whole front end swap.