Carbon / Plastic Frame Guards / Swing Arm cover protection
Carbon / Plastic Frame Guards / Swing Arm cover protection
Author
Discussion

Mr OCD

Original Poster:

6,388 posts

242 months

Tuesday 6th March 2018
quotequote all
Do you bother with them?

Unnecessary bling or worth having ... ?

I can see the point in the frame - not so much the swing arm myself.

(The R1 is going on track this year hence the question - Yes, I know its not a great track bike before you start.)

smile

Edited by Mr OCD on Tuesday 6th March 13:13

dibblecorse

7,662 posts

223 months

Tuesday 6th March 2018
quotequote all
Had a CF swingarm protector on the 996 but that was mainly because of the shape any spill on that side and the face of the swingarm got ground away ... have never bothered elsewhere ....

Birky_41

4,658 posts

215 months

Tuesday 6th March 2018
quotequote all
I'm just about to get some carbon frame guards sent to me for free. Just had to pay postage. Personally it's bling and off no interest but I can see the attraction some people get... Like shorty levers etc




Danm1les

1,023 posts

171 months

Tuesday 6th March 2018
quotequote all
Nice bike Birky! lick

Fleegle

16,710 posts

207 months

Tuesday 6th March 2018
quotequote all
Ever seen a swingarm after its little dance in the gravel?

Mr OCD

Original Poster:

6,388 posts

242 months

Tuesday 6th March 2018
quotequote all
Fleegle said:
Ever seen a swingarm after its little dance in the gravel?
Hence why asking ... smile

Although to be a fair used swing arms are cheap enough...

Mr OCD

Original Poster:

6,388 posts

242 months

Tuesday 6th March 2018
quotequote all
Birky_41 said:
Personally it's bling and off no interest...
.. but what if the bike went down on its side and scratched the frame paint ?

Fleegle

16,710 posts

207 months

Tuesday 6th March 2018
quotequote all
Mr OCD said:
Fleegle said:
Ever seen a swingarm after its little dance in the gravel?
Hence why asking ... smile

Although to be a fair used swing arms are cheap enough...
..especially ones that have been in the gravel

Biker's Nemesis

41,478 posts

239 months

Tuesday 6th March 2018
quotequote all
Mrs nemesis has scratched the frame on my MT 10 with the ironing board.

Wish I had fitted frame protectors like I have on my track bike.

garypotter

2,083 posts

181 months

Tuesday 6th March 2018
quotequote all
Bling, bought my 95 fireblade with lads of carbon additions , bike fell over 2 years ago and damaged CF frame protector but struggling to get replacement so they do have their uses.

Mr OCD

Original Poster:

6,388 posts

242 months

Tuesday 6th March 2018
quotequote all
Biker's Nemesis said:
Mrs nemesis has scratched the frame on my MT 10 with the ironing board.

Wish I had fitted frame protectors like I have on my track bike.
Do you bother with the swing arm chap?

Garybee

453 posts

197 months

Tuesday 6th March 2018
quotequote all
Mr OCD said:
Fleegle said:
Ever seen a swingarm after its little dance in the gravel?
Hence why asking ... smile

Although to be a fair used swing arms are cheap enough...
You'd still have the faff of sourcing and fitting one to contend with though.

Are swingarm/frame protectors effective then or are you just likely to end up trashing both if you have an off?

Biker's Nemesis

41,478 posts

239 months

Tuesday 6th March 2018
quotequote all
Mr OCD said:
Do you bother with the swing arm chap?
Yes.

"Chap"?

Mr OCD

Original Poster:

6,388 posts

242 months

Tuesday 6th March 2018
quotequote all
Garybee said:
You'd still have the faff of sourcing and fitting one to contend with though.

Are swingarm/frame protectors effective then or are you just likely to end up trashing both if you have an off?
They are kevlar lined so they will prevent scratching / chipping / etc... in a big one I've absolutely no idea how they will hold up ... I think the main aim is to protect if the bike is sliding down the road on its side.

A bit like any other form of crash protection - you cannot know how they will protect until / if the time comes ... but do you want to look back and think 'I should have fitted those protection covers... '

Mr OCD

Original Poster:

6,388 posts

242 months

Tuesday 6th March 2018
quotequote all
Biker's Nemesis said:
Yes.

"Chap"?
Good enough for me ...

...Chap smile

Fleegle

16,710 posts

207 months

Tuesday 6th March 2018
quotequote all
My bike flipped in the gravel at Brno.

Exhaust looked like it had been bent over my knee. Rear seat unit smashed to fk. Clip on bent. Fairings took a beating. Tank got dented. Carbon Fibre frame and swingarm protectors got peppered by gravel.....imagine being shotblasted with big pebbles. When I stripped the carbon protectors off to clean up and give a bit of a shine back to them, there wasn't a single mark on the metal work apart from a bit of dust that had got blown up there

For someone like you with freakish cleaning tendencies, there is no way you can't fit these

Mr OCD

Original Poster:

6,388 posts

242 months

Tuesday 6th March 2018
quotequote all
Fleegle said:
My bike flipped in the gravel at Brno.

Exhaust looked like it had been bent over my knee. Rear seat unit smashed to fk. Clip on bent. Fairings took a beating. Tank got dented. Carbon Fibre frame and swingarm protectors got peppered by gravel.....imagine being shotblasted with big pebbles. When I stripped the carbon protectors off to clean up and give a bit of a shine back to them, there wasn't a single mark on the metal work apart from a bit of dust that had got blown up there

For someone like you with freakish cleaning tendencies, there is no way you can't fit these
biggrin Already ordered! smile

Gone for Pro-Fibre.

Gavia

7,627 posts

122 months

Tuesday 6th March 2018
quotequote all
They should be a definite on trackbike, as they serve a purpose, but I’m too cheap to buy them

No need on a road bike IMO, just makes them look a bit Gixxxxxxxxerrrrrr blingtastic.

Birky_41

4,658 posts

215 months

Tuesday 6th March 2018
quotequote all
Mr OCD said:
.. but what if the bike went down on its side and scratched the frame paint ?
Good point. I had a 45mph (by time I went down) crash at doni last year on my track bike and it was pebble dashed everywhere. Frame included but it's a 3k track bike and I honestly couldn't care a less

My road bike is different, really like that bike but I guess if I crashed it hard enough to scuff all my frame up chances are I'd have to go through insurance

Birky_41

4,658 posts

215 months

Tuesday 6th March 2018
quotequote all
anonymous said:
[redacted]
Friend ordered carbon everything as he gets a hard on for that kinda stuff and the frame ones had a small blemish. He told them and they sent another set so he had them sitting there. For me a blemish really isn't a concern. Cost me £12 postage and a tenner on the Aprilia frame stickers and I bought some clear mastic for a fiver to fix in place