Electrical connectors.

[Skyedriver]

Asking for a friend, who's rebuilding an older bike. He wants to add the item in the pic but needs the opposite sides of the two connectors. Ones a two pin the other a three pin. Could anyone suggest that a supplier please. Thanks in advance.

[xstian]

Difficult to see from that photo.

Why not cut the plugs off and fit some superseal connectors on both sides. At least then you know you have a decent waterproof connector. The ones I buy come with both female and male connector as a pack. Make sure you get a decent crimp tool, which is also a good investment.

[roboxm3]

What he said ^^^ or if there's a part/ref. number on the plug, you can probably use some google-fu to identify it and then find the part you want on eBay; that's what I did when I needed a new plug for my Aprilia...turns out it was also used for something or other on a Toyota Yaris.

[Jazoli]

Try

http://www.vehicle-wiring-products.eu/

[Skyedriver]

Thanks, doing this enquiry third hand but understand the cut off and replace idea has already been suggested and refuted.
I'll pass on the website and suggestions above, not sure why he hasn't asked the part supplier.
Tony

[Codotuk]

https://www.narva.com.au/categories/electrical/con...

Looks like this is the make.

Edit
No it’s not. I didn’t notice the lead pin on the plug.

Edited by Codotuk on Tuesday 8th October 17:22

[gareth_r]

Which bike & year?

I don't remember those Lucas switches being wired to anything other than bullet connectors (but perhaps the later bikes used multi-pin connectors).

Edited by gareth_r on Tuesday 8th October 20:19

[roboxm3]

http://www.tri-corengland.com/acatalog/2-Pin-conne...

Is this it?? Hard to tell from the pic but it's got the plastic pin bit that yours have...

[MK3 Dan]

I would suggest trying here:

https://kojaycat.co.uk/

If you can't find it, ask them, they have all sorts!

[Skyedriver]

Thanks again for all advice.
Update, its an old Bonnie, with much butchered wiring. There's an odd connector on the old harness. The new connector is correct.
A complete new harness has now been suggested which hopefully has the correct connector already fitted however the various supplier links are extremely useful and have been noted.