Front end vibration, especially the brake lever
Discussion
I would start with taking your pads out and giving the caliper and pistons a proper clean.
Ensure the pistons are actually working and check the run out of the discs.
Rebuild everything back up and make sure that you set and align the calipers properly, don’t just whack them back on.
Are you still planing on your trip away? If so, I would get new tyres for that as a matter of course too.
But I’m a bit overkill when it comes to brakes and tyres!
Ensure the pistons are actually working and check the run out of the discs.
Rebuild everything back up and make sure that you set and align the calipers properly, don’t just whack them back on.
Are you still planing on your trip away? If so, I would get new tyres for that as a matter of course too.
But I’m a bit overkill when it comes to brakes and tyres!

The screen vibration could be transmitted into the bars, I'd either put the standard screen on or take the screen off completely then go for a ride to see if it's made a difference as you might as well rule out the simple stuff first.
Have a good look at the tyres for cupping or weird wear patterns, my explorer was bad for that on Pirellis.
If it's not vibrating while lightly braking I'd be surprised if they were the culprits, any time I've had issues with brakes it's been fairly obvious where the problem was.
Have a good look at the tyres for cupping or weird wear patterns, my explorer was bad for that on Pirellis.
If it's not vibrating while lightly braking I'd be surprised if they were the culprits, any time I've had issues with brakes it's been fairly obvious where the problem was.
Krikkit said:
I agree and think it's this... But I'd start by swapping the screen back and see what that does. It costs nothing but time.
As does checking the front wheel balance, plenty of vids on you tube on how to do it for free, if it is out of balance some stick on wheel weights are pence from ebay.Had this on a fireblade, vibration started around 75 and just got worse the faster you went. Balanced it myself and it was then silky smooth again, guessing the wheel weights fell off at some point.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff

