triumph 650-750 engine needed.
Discussion
I've got a complete 1968 TR6 650CC trophy (Single carb) that you might be interested in. I was going to restore it, but after fifteen years, perhaps I'm never going to get round to it after all.
It was a runner, but I think I've lost the points cam
I was going to fit electronic ignition as the points cams are notorious for runout on these lumps, making accurate timing a pain!
I know it'll run with an afternoon's TLC, so here's a suggestion. If you're serious, buy the ignition and we'll fire her up again so you know the lump is good. If it doesn't run, I'll buy the ignition off you.
Make me a sensible offer and I could be parted from it.
Here is a picture of it last time it was on the road, back in 1984:

It was a runner, but I think I've lost the points cam
I was going to fit electronic ignition as the points cams are notorious for runout on these lumps, making accurate timing a pain! I know it'll run with an afternoon's TLC, so here's a suggestion. If you're serious, buy the ignition and we'll fire her up again so you know the lump is good. If it doesn't run, I'll buy the ignition off you.
Make me a sensible offer and I could be parted from it.
Here is a picture of it last time it was on the road, back in 1984:
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff




My mate was into period photography... 