Oil/ Filter Change
Author
Discussion

steve11

Original Poster:

522 posts

266 months

Friday 11th May 2007
quotequote all
Hi

Can anyone recommend a good Engine oil for a CBR600rr.

Also manual says I need to use a torque wrench to tighten the oil filter, is this necessary?

ta

lasermatt

61 posts

249 months

Friday 11th May 2007
quotequote all
I used Castrol GPS in mine - Recommended by my dealer and I wasn't too fussy as it was only for a quick change prior to a trackday (Previous oil was nearly a year old) and was serviced agin 6 weeks later.

Didn'tbother with a torque wrench - Mainly cos I didn't have the right sized cup wrench at the time. Should be fine tightened up by hand. I now have a cup wrench for next time - fiver off ebay.

steve11

Original Poster:

522 posts

266 months

Friday 11th May 2007
quotequote all
can I just confirm something, the manual says "remove the left front cowl" just so I know I’m not going bonkers should it not be the right front cowl? confused

lasermatt

61 posts

249 months

Saturday 12th May 2007
quotequote all
Depends how the manual is looking at the bike - Looking from the front it'd be the left. To be honest I whipped both off as it only takes a couple of minutes.