Right...this fabled Honda reliability
Discussion
:-(
My VFR has just developed two problems:
i) No speedo & odometer(other instruments working)
ii) FI light comes on after 20-odd minutes and stays on until ignition turned off and on again.
Otherwise the bike runs fine.
It's recently been serviced and had a ScottOiler (100 miles before problems started).
My guess is the speedo sensor has been knocked/moved when replacing the chain, so I'll investigate that, but any thoughts on the FI light - could this be related to the ScottOiler at all?
My VFR has just developed two problems:
i) No speedo & odometer(other instruments working)
ii) FI light comes on after 20-odd minutes and stays on until ignition turned off and on again.
Otherwise the bike runs fine.
It's recently been serviced and had a ScottOiler (100 miles before problems started).
My guess is the speedo sensor has been knocked/moved when replacing the chain, so I'll investigate that, but any thoughts on the FI light - could this be related to the ScottOiler at all?
My money is on a disturbed connector on the loom somewhere. My engine light came on when I'd forgotten to plug one of the sensors back in (not the speedo one though). There's probably a way to encourage it to give you an error code but I don't know what it is (google). Initially though have a scout around for loom connectors being loose, unconnected, broken etc before you do anything complex.
Edited by dern on Friday 27th June 15:58
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff



