Discussion
Me and the bike! I feel rubbish today, think I'm a bit tired...
Anyway, there seems to be an oil leak from somewhere, oily deposits on the exhaust, small leakage in 1 place on the head. Not sure how much is alot of oil use on a bike but I've gotten through 3/4l in about 2 months.
Where you put the oil in doesnt seem to have a very good seal and a small amount is leaking from there too.
I don't want to spend aload of money on him now I'm going to Oz next year, should I just strip off the fairings, give him a good clean and degreasing and hope for the best?
Anyway, there seems to be an oil leak from somewhere, oily deposits on the exhaust, small leakage in 1 place on the head. Not sure how much is alot of oil use on a bike but I've gotten through 3/4l in about 2 months.
Where you put the oil in doesnt seem to have a very good seal and a small amount is leaking from there too.
I don't want to spend aload of money on him now I'm going to Oz next year, should I just strip off the fairings, give him a good clean and degreasing and hope for the best?
The oil filler should have an o-ring in it if it's like the ones I've seen - maybe it's missing or has perished. Replacing that should do the trick.
Cleaning the engine up will help you identify where the other leak is coming from. Maybe you'll get lucky and it's just the rocker cover. This is a relatively easy fix... new gasket and tighten down to the correct torque and you're done.
Good luck.
Mark
Cleaning the engine up will help you identify where the other leak is coming from. Maybe you'll get lucky and it's just the rocker cover. This is a relatively easy fix... new gasket and tighten down to the correct torque and you're done.
Good luck.
Mark
randlemarcus said:
Its not tiredness, hun, its the Red Wine of Doom...
Stripping, degreasing and cleaning should give you a damn good idea whereabouts the oil is actually leaking from, and endear you to whoever fixes it after that, so no harm in doing it...
Stripping, degreasing and cleaning should give you a damn good idea whereabouts the oil is actually leaking from, and endear you to whoever fixes it after that, so no harm in doing it...
Must be getting old if its a 4 day hangover from Thursday! Most of the club mechanic-y people are away at the weekend, so I'll give him a clean for them getting back and coming to help.
WD40 for de-greasing?
dern said:
Rach* said:
WD40 for de-greasing?
Engine degreaser... you can get it in big tins and it'll be a lot cheaper than wd40 I would have though.Rach* said:
My little area outside the barracks is paved so that should be OK. I'll be careful of my tyres and just do one side at a time incase I forget how to put him back together again 
I've also heard you shouldn't get it on your chain either if it's an O ring chain, if it damages the O rings the chain will wear faster....I don't know if it's true and I've never tried to find out.I just make sure I use a gentle solvent on the chain.
i popped to halfrauds yesterday for gunk & they didnt have any. i got some pink goo made by swarfega instead, its bloody amazing stuff. work it in with a paintbrush & it makes gunk look as useless as washing up liquid. you need sod all so it'll last ages too.
oh & its biodegradable so no problem with washing it off on the floor if your a hippy.
that amount of oil use sounds rather excessive to me, your lucky its not coating the back tyre for you if its all pouring out the sides!
oh & its biodegradable so no problem with washing it off on the floor if your a hippy.
that amount of oil use sounds rather excessive to me, your lucky its not coating the back tyre for you if its all pouring out the sides!
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff




