How do you remove Chicken Strips
Discussion
C8PPO said:
rev-erend said:
How do you remove Chicken Strips
rev-erend said:
Bike is a ZX7R.
Quite easily, I'd imagine!!Roundabout is only going to do one side unless you're going out at 4am

I'm not that nutty

There's always the belt sander option....
No way .. I'm not really that vain.
(Psst - wanna buy some used sliders?
No..
)For getting rid of the chicken strips, you have two options.
Easy option – electric sander and paddock stand!
Hard option – Ride fast enough to remove them!
If you go out with the sole purpose of removing your chicken strips (road or track) then there is a good chance that it will all end in tears. You will inevitably push beyond your limit at which point it is only a matter of time before something goes pear shapped.
I would suggest you need to work on making your cornering smoother. Ensure that you are using the correct speed/gear etc. on entry, that you are looking through the corner and that you are using the throttle to drive out. Make a point of ensuring that your lines are correct (remembering that road and track lines are very different) and that you are comfortable and relaxed.
Once all of this starts to fall into place, your cornering speed will increase without you even thinking about it as will your lean angles but, most importantly, you will still be riding safely. Bye bye chicken strips!
Ride safe and enjoy.
Easy option – electric sander and paddock stand!
Hard option – Ride fast enough to remove them!
If you go out with the sole purpose of removing your chicken strips (road or track) then there is a good chance that it will all end in tears. You will inevitably push beyond your limit at which point it is only a matter of time before something goes pear shapped.
I would suggest you need to work on making your cornering smoother. Ensure that you are using the correct speed/gear etc. on entry, that you are looking through the corner and that you are using the throttle to drive out. Make a point of ensuring that your lines are correct (remembering that road and track lines are very different) and that you are comfortable and relaxed.
Once all of this starts to fall into place, your cornering speed will increase without you even thinking about it as will your lean angles but, most importantly, you will still be riding safely. Bye bye chicken strips!
Ride safe and enjoy.
black-k1 said:
For getting rid of the chicken strips, you have two options.
Easy option – electric sander and paddock stand!
Hard option – Ride fast enough to remove them!
If you go out with the sole purpose of removing your chicken strips (road or track) then there is a good chance that it will all end in tears. You will inevitably push beyond your limit at which point it is only a matter of time before something goes pear shapped.
I would suggest you need to work on making your cornering smoother. Ensure that you are using the correct speed/gear etc. on entry, that you are looking through the corner and that you are using the throttle to drive out. Make a point of ensuring that your lines are correct (remembering that road and track lines are very different) and that you are comfortable and relaxed.
Once all of this starts to fall into place, your cornering speed will increase without you even thinking about it as will your lean angles but, most importantly, you will still be riding safely. Bye bye chicken strips!
Ride safe and enjoy.
Easy option – electric sander and paddock stand!
Hard option – Ride fast enough to remove them!
If you go out with the sole purpose of removing your chicken strips (road or track) then there is a good chance that it will all end in tears. You will inevitably push beyond your limit at which point it is only a matter of time before something goes pear shapped.
I would suggest you need to work on making your cornering smoother. Ensure that you are using the correct speed/gear etc. on entry, that you are looking through the corner and that you are using the throttle to drive out. Make a point of ensuring that your lines are correct (remembering that road and track lines are very different) and that you are comfortable and relaxed.
Once all of this starts to fall into place, your cornering speed will increase without you even thinking about it as will your lean angles but, most importantly, you will still be riding safely. Bye bye chicken strips!
Ride safe and enjoy.
totally agree, very sound advice. You will lose them in time but as the man said it will happen but pushing it will end in tears.I also find that I have a preference on one side than the other. Weird, but the side changed whilst in Europe. Obviously, far to much caution!
I had a 7r and I could get to the edge on the right hand side and about 5mm from the left hand side.
However, on the same bike I could do the same roads quicker and have an inch wide chicken strip either side - it's all to do with how you take the corners. Do you "racing line" it (within your own lane) or do you follow the curve? Racing line is quicker but you keep the chicken strips.
However, on the same bike I could do the same roads quicker and have an inch wide chicken strip either side - it's all to do with how you take the corners. Do you "racing line" it (within your own lane) or do you follow the curve? Racing line is quicker but you keep the chicken strips.
never got my knee down yet. in no rush. wil happen 1 day.
as for losing your strips just have faith in the corners. trust yourself and the bike. I know my bike is must more capable than I am at going around a corner.
as I said on another thread, only done 80 miles last night on new tyres. no strips left. mainly managed it as I went to some lovely roads near Abergavenny and know them very well
as for losing your strips just have faith in the corners. trust yourself and the bike. I know my bike is must more capable than I am at going around a corner.
as I said on another thread, only done 80 miles last night on new tyres. no strips left. mainly managed it as I went to some lovely roads near Abergavenny and know them very well
Edited by RemaL on Tuesday 9th September 15:35
black-k1 said:
For getting rid of the chicken strips, you have two options.
Easy option – electric sander and paddock stand!
Hard option – Ride fast enough to remove them!
or 3 - try rubbing them down on a tree/hedge like ChilliEasy option – electric sander and paddock stand!
Hard option – Ride fast enough to remove them!
i'm kidding nic
Edited by RemaL on Tuesday 9th September 15:37
RemaL said:
black-k1 said:
For getting rid of the chicken strips, you have two options.
Easy option – electric sander and paddock stand!
Hard option – Ride fast enough to remove them!
or 3 - try rubbing them down on a tree/hedge like ChilliEasy option – electric sander and paddock stand!
Hard option – Ride fast enough to remove them!
i'm kidding nic
Edited by RemaL on Tuesday 9th September 15:37
rev-erend said:
I'm not getting the lean angle vs speed part..
Why would I need to lean more at higher speed..
Perhaps I should just go out and ride it instead of typing
Sham it's raining 
For any given bend, the faster the bike is going, the further over it will have to lean in order to get around. Why would I need to lean more at higher speed..
Perhaps I should just go out and ride it instead of typing
Sham it's raining 
As you go around a bend, (a right hander for example) the force will effectively try to push you over to the left. (Hence cars ‘roll’ to the left on right hand bends). On a bike you counter that force by leaning into the bend. As the speed of the bike increases so the amount of force applied has to increase in order to make the corner. This increased force requires an increased angle of lean to counter-act it and thus stop the bike ‘falling over’.
jon- said:
Knee down no problem last night, worn through my right toe slider on my boots (and part of the boot) yet i still have a few mm chicken strip on my rear tyre.
Quite frustrating. I've been low enough to feel like the bike was dropping before i stood it up too.
You must be hanging off like a baboon to get your knee down and still have chicken strips?Quite frustrating. I've been low enough to feel like the bike was dropping before i stood it up too.
I can get rid of chicken strips just by leaning a bike over and never get my knee down unless it is for the obligatory trackday photos
jjr1 said:
jon- said:
Knee down no problem last night, worn through my right toe slider on my boots (and part of the boot) yet i still have a few mm chicken strip on my rear tyre.
Quite frustrating. I've been low enough to feel like the bike was dropping before i stood it up too.
You must be hanging off like a baboon to get your knee down and still have chicken strips?Quite frustrating. I've been low enough to feel like the bike was dropping before i stood it up too.
I can get rid of chicken strips just by leaning a bike over and never get my knee down unless it is for the obligatory trackday photos
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff



