General Maintenance
Discussion
When washing the bike use something like Muc Off, or Silkolene Fuchs Off (I kid you not)
Do not use car wash shampoo of any sort as they contain salt and other nasty stuff that's not good for the bike.
I usually rinse with cold water spray on the Off then attack with a soft sponge then rinse again..
I dry the bike then apply Putoline Protect and Shine 645.
Then make sure the chains dry with WD40 and add lube....
Do not use car wash shampoo of any sort as they contain salt and other nasty stuff that's not good for the bike.
I usually rinse with cold water spray on the Off then attack with a soft sponge then rinse again..
I dry the bike then apply Putoline Protect and Shine 645.
Then make sure the chains dry with WD40 and add lube....
barry sheene said:
When washing the bike use something like Muc Off, or Silkolene Fuchs Off (I kid you not)
Do not use car wash shampoo of any sort as they contain salt and other nasty stuff that's not good for the bike.
I usually rinse with cold water spray on the Off then attack with a soft sponge then rinse again..
I dry the bike then apply Putoline Protect and Shine 645.
Then make sure the chains dry with WD40 and add lube....
Oops balls!Do not use car wash shampoo of any sort as they contain salt and other nasty stuff that's not good for the bike.
I usually rinse with cold water spray on the Off then attack with a soft sponge then rinse again..
I dry the bike then apply Putoline Protect and Shine 645.
Then make sure the chains dry with WD40 and add lube....
already used car wash shampoo!
Oh well, guess i better go buy some bike wash shampoo and some WD40 and lube!
Nick
Its true about jet washes, best off staying away. Muc off is good but also quite expensive. I just tend to use it on the mucky bits now. I have also tries sDoc 100 bike cleaner which was great but I had to ride 10 miles (HG stock it) to get it and it's £12 a litre. Castrol bike cleaner was cheaper and quite good but I just use them for getting the dirt off but they don't make the bike look clean. Best is just car shampoo and a mitt.
Sossige said:
Lube the chain when it's warm, supposedly helps the lube work it's way into the chain links better.
I know that this is accepted wisdom and I may well be wrong here but it seems unlikely to be true with o-ring chains. The chain lube that you're applying shouldn't work its way in to the links I don't think as they're effectively sealing the oil out. I think that they will do this because their job is to seal in the oil/grease that is put in there when the chain is made. I think what you're doing when you lube the chain is lubricating the chain/sprocket interfaces and also keeping the chain from rusting as the surface rust can damage the o-rings as it all flexes. Unfortunately the lube also attracts dust which has the same abrasive effect on the chain which is why cleaning it will extend the life of the chain. If applying lube to a warm chain allows the lube to get in to the o-ring sealed bits of the chain then it would all come out an awful lot quicker as you ran the bike because the chain would be that much warmer and all the oil would be flung out due to centrifugal force. Or something.dern said:
Sossige said:
Unfortunately the lube also attracts dust which has the same abrasive effect on the chain which is why cleaning it will extend the life of the chain.
Which is one of the advantages of a Scott oiler. It constantly lubricates the chain and the excess oil and dust and crud gets flung off and stops your wheels rusting 
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff




te.