Discussion
I've never really done anything to my blade as such, not even bothered cleaning it. The only things that have corroded are the fairing fastners and the rear axle nut and it's probably easier to replace them than bother with cleaning. It does have to said though that my standards for bike presentation are not that high although I occasionally do get a sense of pride when some particularly heavy rain has shifted some of the larger clumps of detritous 

Tectyl 506 will give a better level of protection than ACF50, but you need the bike to be very clean before you apply it, and I believe you really need a special removing agent to get it off again.
If you tend to clean your bike regularly an alternative is scottoil FS365. It's nowhere near as long lasting so if you clean the bike every week or 2 and reapply it you'll get a good level of protection but it'll look better than coating it in ACF and leaving it all winter.
I'll be going down the ACF route myself, give the bike a good clean after my Scotland trip next weekend, coat liberally, then give it another clean next september
.
If you tend to clean your bike regularly an alternative is scottoil FS365. It's nowhere near as long lasting so if you clean the bike every week or 2 and reapply it you'll get a good level of protection but it'll look better than coating it in ACF and leaving it all winter.
I'll be going down the ACF route myself, give the bike a good clean after my Scotland trip next weekend, coat liberally, then give it another clean next september
.Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


