Discussion
Had a sit on one last weekend here http://www.fighterstation454.com/
Not really my cup of tea but a good alternative to a Harley.
Not really my cup of tea but a good alternative to a Harley.
I saw a Victory bike in Broadgate (City of London) next to Gaucho Grill where a (presumably) local bike shop was showing off their range of Ducatis and Aprilias. Obviously I was drooling over the sports bikes, but there was also this oddball cruiser with what (after a quick conversion on my iphone) was a simply enormous engine capacity for a V twin.
It looked a LOT more traditional Harley-style than the bike in the picture above - no swoopy fairings, just black and chrome, a rather fat rear tyre, big footplates ahead of the engine, real sit-back-and-feel-the-torque type motorcycling.
I imagine it'd be an absolute pig to ride in London, I have never tried a heavy cruiser (Harley or the Jap lookalikes) mostly because they don't float my boat, but also because they are *really* heavy and my limited skill may struggle to manoeuvre them at low speed. And if I dropped it then I wouldn't be able to pick it up again
Then again, when I was searching for bike schools to do my DAS 10 years ago or so, there was some place that taught you from the start on Harley-Davidson bikes. Sounded crazy to me, since Harleys are damn expensive for motorbikes and beginners are going to be dropping them right left and centre...
Isn't there a point at which too much torque is impossible to control on a bike? As in too much force for the front brake to contain, so a clutch malfunction (or clumsy control) would send the bike forward regardless of braking the front wheel? This'd either stick you into a car (in traffic) or skid the front wheel until you fell off. Presumably there's torque reaction from blipping the throttle to deal with as well, though with the V-twin in that configuration it wouldn't rock the bike from side to side (imagine a Moto Guzzi with that capacity though...)?
I know mad people have fitted all sorts of engines to bikes, including V8s and rotary aircraft engines, are these things actually feasible to ride in the UK's twisty and traffic-clogged roads, or are they really for long distance USA straight-lining in comfort and speed?
It looked a LOT more traditional Harley-style than the bike in the picture above - no swoopy fairings, just black and chrome, a rather fat rear tyre, big footplates ahead of the engine, real sit-back-and-feel-the-torque type motorcycling.
I imagine it'd be an absolute pig to ride in London, I have never tried a heavy cruiser (Harley or the Jap lookalikes) mostly because they don't float my boat, but also because they are *really* heavy and my limited skill may struggle to manoeuvre them at low speed. And if I dropped it then I wouldn't be able to pick it up again

Then again, when I was searching for bike schools to do my DAS 10 years ago or so, there was some place that taught you from the start on Harley-Davidson bikes. Sounded crazy to me, since Harleys are damn expensive for motorbikes and beginners are going to be dropping them right left and centre...
Isn't there a point at which too much torque is impossible to control on a bike? As in too much force for the front brake to contain, so a clutch malfunction (or clumsy control) would send the bike forward regardless of braking the front wheel? This'd either stick you into a car (in traffic) or skid the front wheel until you fell off. Presumably there's torque reaction from blipping the throttle to deal with as well, though with the V-twin in that configuration it wouldn't rock the bike from side to side (imagine a Moto Guzzi with that capacity though...)?
I know mad people have fitted all sorts of engines to bikes, including V8s and rotary aircraft engines, are these things actually feasible to ride in the UK's twisty and traffic-clogged roads, or are they really for long distance USA straight-lining in comfort and speed?
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


