bike tool kit
Author
Discussion

steveo29

Original Poster:

1,885 posts

220 months

Sunday 21st September 2008
quotequote all
what does the collective brains of PH's bike banter think of this tool kit??

http://www.getgeared.co.uk/ROTHEWALD_Professional_...

looks good to me to start with but i dont really know much about tools and working on bikes.
my tool knowlage is as far as what a spanner and screwdriver is lol.

WestYorkie

1,811 posts

226 months

Sunday 21st September 2008
quotequote all
Ehup mate. I'd say that instead of spending your cash on the tool box.
You'd be better off putting it towards a evening collage course into basic spannering that IMO would help you alot more than jumping in feet first.

FFS I've just tried to search my local collage for a suitable course and they don't do owt.
You can have a course for...
African Drumming
Bobbin Lace / Embroidery
  1. Dance
  2. Arabic
  3. Flamenco
  4. Salsa
Egyptology
Rag Rug Making

FFS I know this is more of a P&P post but whatever happened to someone learning how to look after their motor?

Sorry mate... I'd get the tool kit and fumble around frown

steveo29

Original Poster:

1,885 posts

220 months

Sunday 21st September 2008
quotequote all
lol at the dance class's

might have to look into the basic spannerwork class's tho.

might help out with cars aswell.

speed_monkey

3,503 posts

220 months

Sunday 21st September 2008
quotequote all
steveo29 said:
lol at the dance class's

might have to look into the basic spannerwork class's tho.

might help out with cars aswell.
Only real way of learning is getting stuck in matey.

You WILL make mistakes (even people who have been tinkering for years still do) but thats the fun of it and trust me.... you will never make the same mistake again!

Wasted Bullet

426 posts

283 months

Sunday 21st September 2008
quotequote all

I don't think there is enough infomation about what is included in that set. For example, I can see a socket set, but It dosn't say what size.

I tend not to buy 'tool box sets' because the quality is often lower, instead I buy the individual tools in sets that I need, that way I avoid having loads of duplicate tools.

Halfords is a good place to start, look at their proffesional range,

I agree with finding a motorbike maintenance course...


speed_monkey

3,503 posts

220 months

Sunday 21st September 2008
quotequote all
Wasted Bullet said:
I don't think there is enough infomation about what is included in that set. For example, I can see a socket set, but It dosn't say what size.

I tend not to buy 'tool box sets' because the quality is often lower, instead I buy the individual tools in sets that I need, that way I avoid having loads of duplicate tools.

Halfords is a good place to start, look at their proffesional range,

I agree with finding a motorbike maintenance course...
+1 for buying what you need!

However i say that but last year i got a snap-on tool chest set..... yes they are very shiny biggrin lol

i didnt even know they did a motorbike maintenance course hmmm.... mind you I learnt all of the engineering skills i needed in the RAF

Hooli

32,278 posts

231 months

Sunday 21st September 2008
quotequote all
Wasted Bullet said:
Halfords is a good place to start, look at their proffesional range,
lifetime warrenty too, break it, take it back deny using a rachet as a hammer & get a replacement.

RizzoTheRat

29,153 posts

223 months

Sunday 21st September 2008
quotequote all
Basic tool kit:
Hammer - If it doesn't move and it should, hit it.
Gaffer tape - If it does and it shouldn't, tape it.

Advanced tool kit, as per basic tool kit plus:
WD40 - If you can't shift it with a hammer, squirt some WD40 on it
Cable ties - If you want a longer term fix than gaffer tape.

steveo29

Original Poster:

1,885 posts

220 months

Sunday 21st September 2008
quotequote all
lol @ rizzo
thats like the haynes manuel discriptions.


as for not being able to see what is in the kit. if you click the link then click on the techy stuff, it tells you exactally what is in it.

Rach*

8,824 posts

247 months

Sunday 21st September 2008
quotequote all
I don't know whereabouts you are Steveo but I was thinking about something like this:
http://www.wakcoll.ac.uk/AdultCourses/leaflet.asp?...

Otherwise, I bought a Haynes manual, although it confuses me somewhat, and ask my spannering type men friends to help me out wink


Rach*

8,824 posts

247 months

Sunday 21st September 2008
quotequote all
Oh and there's a pretty good Halfrauds Professional kit, with socket set, spanners, etc reduced to £99, do you know anyone with a Halfords Trade card?

steveo29

Original Poster:

1,885 posts

220 months

Sunday 21st September 2008
quotequote all
might do, unsure, how do you get a trade car?

is being a mechanic/owning your own mot/service/tuning garage allow you to get a trade card?

Stu R

21,701 posts

246 months

Sunday 21st September 2008
quotequote all
Bikes don't really require a comprehensive toolkit.

I've got a hell of a comprehensive tool collection in the garage, and most of it gathers dust when it comes to bikes. Assuming you just want to do general maintenance and so on, you won't need anything complex.

a decent socket set, a few spanners (ratchet spanners are very handy too), screwdrivers, allen keys, cable ties, leccy tape and you should be able to cover most of the basic jobs. Just make sure you have a spanner or socket big enough for the wheel spindles, and if you're getting adventurous a chain tool.

Leatherman type multitools can come in handy too.

Just buy good quality gear, the halfords professional tools are great, as is the lifetime guarentee that comes with them, just don't get suckered into the snap on / mac tools stuff, it's decent gear but generally overpriced and overkill for the amateur home mechanic. I say that as someone who has a garage full of it too wink

I'd go with Rach's recommendation, 100 quid spent on a basic but comprehensive halfords pro set should get you through most jobs, the rest you can pick up as you go along. Haynes manuals are handy enough if you're throwing yourself in at the deep end and learning as you go, and most marques have decent forums if you get stuck.

Rach*

8,824 posts

247 months

Sunday 21st September 2008
quotequote all
I used my RAF ID card and kind of blagged it a bit redface

Certainly being a mechanic etc would get you one

Stu R

21,701 posts

246 months

Sunday 21st September 2008
quotequote all
steveo29 said:
might do, unsure, how do you get a trade car?

is being a mechanic/owning your own mot/service/tuning garage allow you to get a trade card?
halfords trade cards are incredibly easy to get yes or they used to be. Anyone in any loosely related trade can get them, any joe public could when I got mine smile

dern

14,055 posts

310 months

Sunday 21st September 2008
quotequote all
If you're going to start working on your own bike the most important tool you can have at your disposal is another bike or a car. The reason for this is the no matter how comprehensive your tool kit is you'll still need something new half way through the job. The temptation will be to improvise and make your own 'special tool' - unless you are absolutely sure this will work resist as you'll then need the tool anyway plus whatever you broke with your hand crafted tool plus bandages.

So, if you have secondary transport all you need to get you started is the basics and then you can add to that as you go along. Imo the basics are a socket set, a set of spanners, a set of screwdrivers and a set of allen keys. You'll then accumulate a collection of extra stuff like knives, hammers, a multimeter (very useful) and so on.

A course will give you confidence but time spent with the haynes manual or preferably the workshop manual in cd form off ebay will result in the same thing. The internet is a great source of information and you'll hopefully learn to sift out the useful 10% of information you find on it.

It's well worthwhile imo. It's frequently frustrating (too fking frequently recently) but you will no longer be at the beck and call of your local stealership. At the end of the day there are ways to diagnose problems and if learn those and try and avoid the approach of simply keep swapping parts out until it works (which ime is what some dealers to - to your cost) you'll be fine.

Halford pro stuff is pretty good in my opinion. They'll also replace anything you break. I broke a 5mm allen key socket on a brake caliper recently and they replaced it without question.

Edited by dern on Sunday 21st September 21:31

steveo29

Original Poster:

1,885 posts

220 months

Sunday 21st September 2008
quotequote all
Rach* said:
I don't know whereabouts you are Steveo but I was thinking about something like this:
http://www.wakcoll.ac.uk/AdultCourses/leaflet.asp?...

Otherwise, I bought a Haynes manual, although it confuses me somewhat, and ask my spannering type men friends to help me out wink
that would be perfect, if i didnt have to travel 200+ miles to get to it :/

cant find anywere in kent that does bike course's. only car ones :/

as for needing another transport for when its apart and i need another part, will have a cheapo car to run, or poss another bike, all dippends on which i feel like getting.

Rach*

8,824 posts

247 months

Sunday 21st September 2008
quotequote all
http://www.icslearn.co.uk/vocational-courses/const...

There's an online one but it's pretty steep!


Twit

2,908 posts

295 months

Sunday 21st September 2008
quotequote all
Agree with Halfords for tools, their's are good!

As for courses; don't bother, just get stuck in. Bikes are so simple its pretty difficult to bodge them up, just get a proper workshop manual and as has been said the net is always a good back up. Just go for it!

RizzoTheRat

29,153 posts

223 months

Sunday 21st September 2008
quotequote all
Twit said:
just get stuck in.
Have to agree there. I'd never done more than an oil change myself until a 2 or 3 years ago, when my oil consumption reached over 2 litres in 1100 miles. Read up on it a bit, plus got some good advice from the owners forum, the did a compression test and determined it was the piston rings. Given the age of the bike a dealer would have charged me nearly the bikes value to do it so figured I didn't realy have a lot to loose by having a go myself. I saved a load of cash, learned a shed loads and 12000 miles later the bikes still going fine and I've got a load more confidence to do work on it. I have since rebushed the forks, replaced the emulsion tubes, and done several other jobs that I'd have been scared of before.