Dot 5. Same as Dot 5.1
Discussion
I hope so, as I'm about to put it into my bikes brake system. 
I bought Dot 4 assuming a 20 year old bike would use that, but then the MC covers both said 'DOT 5 ONLY'. So, back to Halfrauds, only shop open on Sunday, swapped it for Dot 5.1, which is all they have.
So, I know the wrong ones mixed together can cause the stuff to gel, but I'm doing a whole fluid change. I also heard it can knacker seals up. Anybody know anything about this?

I bought Dot 4 assuming a 20 year old bike would use that, but then the MC covers both said 'DOT 5 ONLY'. So, back to Halfrauds, only shop open on Sunday, swapped it for Dot 5.1, which is all they have.
So, I know the wrong ones mixed together can cause the stuff to gel, but I'm doing a whole fluid change. I also heard it can knacker seals up. Anybody know anything about this?
King Herald said:
I hope so, as I'm about to put it into my bikes brake system. 
I bought Dot 4 assuming a 20 year old bike would use that, but then the MC covers both said 'DOT 5 ONLY'. So, back to Halfrauds, only shop open on Sunday, swapped it for Dot 5.1, which is all they have.
So, I know the wrong ones mixed together can cause the stuff to gel, but I'm doing a whole fluid change. I also heard it can knacker seals up. Anybody know anything about this?
It says 'none silicon based' on the bottle of 5.1. I've flushed the system through fairly well with it, drained it completely, rather than just topped it up.
I bought Dot 4 assuming a 20 year old bike would use that, but then the MC covers both said 'DOT 5 ONLY'. So, back to Halfrauds, only shop open on Sunday, swapped it for Dot 5.1, which is all they have.
So, I know the wrong ones mixed together can cause the stuff to gel, but I'm doing a whole fluid change. I also heard it can knacker seals up. Anybody know anything about this?
Sounds like you have already figured out the answer.
DOT4 and DOT 5.1 are compatible and can be mixed.
DOT5 is completely incompatible. You shouldn't mix it with the others, and you change to/from DOT5 you would be advised to replace the seals as well as flushing the whole thing through.
The only remaining uncertainty is whether it was previously running DOT5. If you've filled it with DOT5.1 now then you had better hope not.
DOT4 and DOT 5.1 are compatible and can be mixed.
DOT5 is completely incompatible. You shouldn't mix it with the others, and you change to/from DOT5 you would be advised to replace the seals as well as flushing the whole thing through.
The only remaining uncertainty is whether it was previously running DOT5. If you've filled it with DOT5.1 now then you had better hope not.
Dot 5 and dot 5.1 are definitely NOT the same stuff. A thread on the Elise forum give some more info.
http://www.pistonheads.com/gassing/topic.asp?f=15&...
Personally I wouldn't use the wrong one, brakes are kinda important.
Trace
http://www.pistonheads.com/gassing/topic.asp?f=15&...
Personally I wouldn't use the wrong one, brakes are kinda important.

Trace

I have an inkling it could have been a concoction of fluid in there originally, as the guy I bought it of said he had replaced all the deals in the brakes. But, the fluid I spilled on some paint marked it quite easily, which indicates it was Dot 3 or 4. 5.1 is compatible with them.
But, did he really service the system, as the fluid I drained from the front brake system looked kind of gungy to me.
But, did he really service the system, as the fluid I drained from the front brake system looked kind of gungy to me.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


