Blade misfire.
Discussion
I posted this on the fireblades forum but wondered if anyone here can shed any light on this...
My 929rry fireblade seems to be suffering from a misfire. As I'm riding along on a constant throttle the bike seems to very slightly misfire, it just isn't smooth. I wouldn't call it a hesitation because it's not hesitating to respond to the throttle but it's like that about to run out of gas type come and go misfire but very subtle. It's been doing it for a while and I'd pretty much put it down to my imagination but it's got worse over the last couple of days and it's definitely real. I can feel the misfire when on a constant throttle and when I'm accelerating very gently but anything more and it either goes away or is swamped and you can detect it any more. If I accelerate hard it drives all the way to the red line. I've changed gas suppliers a couple of times to no avail.
I've put new plugs in, completely cleaned all the electrical connectors in the loom, I have a very solid voltage which never drops while riding and I have no error lights when in diag mode. I can't test the fuel pressure but the fact that it just drives hard to the red line suggests that there's plenty of fuel pressure.
My thought were to get a spare coil and try and swap them out in turn but I must admit with the problems I've had with this bike my heart isn't really in it any more.
Any ideas what this could be and what to try next?
Thanks,
Mark
My 929rry fireblade seems to be suffering from a misfire. As I'm riding along on a constant throttle the bike seems to very slightly misfire, it just isn't smooth. I wouldn't call it a hesitation because it's not hesitating to respond to the throttle but it's like that about to run out of gas type come and go misfire but very subtle. It's been doing it for a while and I'd pretty much put it down to my imagination but it's got worse over the last couple of days and it's definitely real. I can feel the misfire when on a constant throttle and when I'm accelerating very gently but anything more and it either goes away or is swamped and you can detect it any more. If I accelerate hard it drives all the way to the red line. I've changed gas suppliers a couple of times to no avail.
I've put new plugs in, completely cleaned all the electrical connectors in the loom, I have a very solid voltage which never drops while riding and I have no error lights when in diag mode. I can't test the fuel pressure but the fact that it just drives hard to the red line suggests that there's plenty of fuel pressure.
My thought were to get a spare coil and try and swap them out in turn but I must admit with the problems I've had with this bike my heart isn't really in it any more.
Any ideas what this could be and what to try next?
Thanks,
Mark
castrolcraig said:
same happened to my old boys 929 (rry) it turned about to be the clocks.....
if you have any friends with the same model just swapthe clockset around and see if the problem persists.
Are the clocks required for the thing to run? I'll unplug tham and find out.if you have any friends with the same model just swapthe clockset around and see if the problem persists.
Cheers,
Mark
castrolcraig said:
i was going to suggest putting it n diag mode with a short plug but it seems you may have already tried it.
Since cars and bikes have been able to tell you what's wrong with them I have never yet had anything go wrong that the bike or car could tell me about - it's always been something else 
I got quite excited after cleaning the loom connectors as I got an error but it turned out that I'd forgotten to plug a sensor back in and the bike was still misfiring after I reconnected it - d'oh.
Might be something as simple as clogged/crap in injectors. Go to Halfords and buy some redex fuel system/injector cleaner.
I always overdose on a tank with the stuff (about 50% more than they recommend) and the difference is always amazing, especially on carbed vehicles and diesels.
Highly recommend this.
I always overdose on a tank with the stuff (about 50% more than they recommend) and the difference is always amazing, especially on carbed vehicles and diesels.
Highly recommend this.
3doorPete said:
Might be something as simple as clogged/crap in injectors. Go to Halfords and buy some redex fuel system/injector cleaner.
I always overdose on a tank with the stuff (about 50% more than they recommend) and the difference is always amazing, especially on carbed vehicles and diesels.
Highly recommend this.
Does that stuff really work? I'll pick some up and give it a go.I always overdose on a tank with the stuff (about 50% more than they recommend) and the difference is always amazing, especially on carbed vehicles and diesels.
Highly recommend this.
Edited by dern on Monday 22 September 09:16
dern said:
3doorPete said:
Might be something as simple as clogged/crap in injectors. Go to Halfords and buy some redex fuel system/injector cleaner.
I always overdose on a tank with the stuff (about 50% more than they recommend) and the difference is always amazing, especially on carbed vehicles and diesels.
Highly recommend this.
Does that stuff really work? I'll pick some up and give it a go.I always overdose on a tank with the stuff (about 50% more than they recommend) and the difference is always amazing, especially on carbed vehicles and diesels.
Highly recommend this.
smack said:
dern said:
3doorPete said:
Might be something as simple as clogged/crap in injectors. Go to Halfords and buy some redex fuel system/injector cleaner.
I always overdose on a tank with the stuff (about 50% more than they recommend) and the difference is always amazing, especially on carbed vehicles and diesels.
Highly recommend this.
Does that stuff really work? I'll pick some up and give it a go.I always overdose on a tank with the stuff (about 50% more than they recommend) and the difference is always amazing, especially on carbed vehicles and diesels.
Highly recommend this.

Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


