Discussion
Only you can answer that question matey. There is an argument to be made, if you have the time, for spending a bit of time with an older bike which you have to do the spanner work on yourself. Helps you learn and understand more about the way the machine works, and also helps to remove some of the mystery.
On the other hand, if you have no technical ability and lack the time or confidence to do the work/learn as you go, then it could feel like a burden.
Personally, I bought a snotter of a car, did all the work myself and loved it, but eventually got rid as my time became more precious. I would never rule out owning something like that though as it was a great learning experience and made the car feel more part of me. Conversely when it went wrong (which it inevitably did) it was probably far more annoying!
On the other hand, if you have no technical ability and lack the time or confidence to do the work/learn as you go, then it could feel like a burden.
Personally, I bought a snotter of a car, did all the work myself and loved it, but eventually got rid as my time became more precious. I would never rule out owning something like that though as it was a great learning experience and made the car feel more part of me. Conversely when it went wrong (which it inevitably did) it was probably far more annoying!
my first bike was a £500 RF600, did 20k in 9 months on it. yes it broke but not that often & it was a great way to learn my way around bikes. at the same time its a cheap shed so if i'd thrown it into hedges/cars/etc then i wouldnt have lost much. but no i waited till i paid £4k for a bike before throwing it at a car!
I had a £550 M reg Yamaha 600 Diversion that never missed a beat.
I was away for 6 weeks at Christmas, and left it in a mate's garage, not attached to anything. Came back, primed the fuel, started no problem.
It lived outside, under a cover, all year round. I rode it through the winter, and in heavy rain.
I passed it on to my BiL, and rode from Lancashire to Newmarket in one go, only stopping for fuel. It would quite happily sit at an indicated 85-90 on the motorway (so a friend tells me). Top end was an indicated 115 (again, courtesy of the same friend).
The only "maintenance" I had to do was to top the oil up regularly (about once a week - it used about 3.5 litres over 10 months or so), but once you knew about it, it wasn't a problem.
It was never going to set my heart on fire, but you woudln't expect that when the official Yamaha paint name was "Graceful Maroon"... but it was a great bike to get started on. Insurance and tax were cheap (and fully comp insurance was actually £20 cheaper than TPFT!).
I was away for 6 weeks at Christmas, and left it in a mate's garage, not attached to anything. Came back, primed the fuel, started no problem.
It lived outside, under a cover, all year round. I rode it through the winter, and in heavy rain.
I passed it on to my BiL, and rode from Lancashire to Newmarket in one go, only stopping for fuel. It would quite happily sit at an indicated 85-90 on the motorway (so a friend tells me). Top end was an indicated 115 (again, courtesy of the same friend).
The only "maintenance" I had to do was to top the oil up regularly (about once a week - it used about 3.5 litres over 10 months or so), but once you knew about it, it wasn't a problem.
It was never going to set my heart on fire, but you woudln't expect that when the official Yamaha paint name was "Graceful Maroon"... but it was a great bike to get started on. Insurance and tax were cheap (and fully comp insurance was actually £20 cheaper than TPFT!).
Having a cheap bike and having the ability to fix it doesn't necessarily mean it won't let you down away from home in my experience. You can service the hell out of it and maybe get lucky but cheap usually equals old plus high miles so stuff wears out. Having said that good bike are available for not much - I've just bought a 5000 mile trophy for 3k - but I couldn't see £500 being enough to get you anything that would be usable on a daily basis. I'm sure some people have done exactly that though.
Edited by dern on Thursday 25th September 20:52
The '95 CB500 cost just over £500 and (this is tempting fate a touch) so far i've put a few thousand on as a daily hack and not a thing has gone wrong yet.
I did the customary oil and filter change when i got it and have a chain/sprocket set waiting to go on but so far so good.
I think there are bargains to be had now the weather is pulling in but you have to wade through alot of tat to find a decent one.
I did the customary oil and filter change when i got it and have a chain/sprocket set waiting to go on but so far so good.
I think there are bargains to be had now the weather is pulling in but you have to wade through alot of tat to find a decent one.
The ideal snotter is like the bike Fire99 has. Just tidy up service and ride.
I bought an older bike for my first bike as I don't mind a bit of spanner work. Also it is a good way to learn about bikes and the like.
However with my car hobby and bike hobby and a small family my next Bike will be one that I don't need to work on so much.
I bought an older bike for my first bike as I don't mind a bit of spanner work. Also it is a good way to learn about bikes and the like.
However with my car hobby and bike hobby and a small family my next Bike will be one that I don't need to work on so much.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff



.