Discussion
Chilli said:
Amazes me hoe poeople can just buy stuff, and actually have the know-how to assemble/fit it!
Indeed, I am always in awe of those who are able to make "modifications" to their bikes that do not immediately require some one else to fix.
Oh well at least my local dealer gives me a discount on all the work I stick their way 
Looking good 
Just stuck one of these on the Varadero to stop the winter crud getting all over the place.It just uses the same 3 screw holes that are on the swing arms already on my bike and a drill hole on the other side - probably the easiest spanner job I have ever had to do tbh! Took about 5 minutes
I too enjoy working on the bike.I used to tinker with cars but even with something as exposed as the Westfield, they still got on my nerves in one way or another.Since getting the bike though, I have had both the wheels off and taken them to get tyres, replaced the headlamp bulbs with brighter ones, changed the oil, oil filter, air filter and plugs, removed the clocks and dismantled them so I could clean under the perspex (annoying mark on it), upgraded the chain and sprockets, changed front and rear brake fluid, changed rear brake pads, added new mirrors, adjusted the rear brake light switch, stiffened up the rear shock, added some wind deflectors and fork protectors (also fitted a top box although it's hardly ever on the bike) and generally tidied and tarted it up all round.
I don't even mind cleaning it and keeping the forks/chain/cables lubed up etc.I used to enjoy cleaning cars too, but lost all interest in that over the years, I am happy to sit and clean the bike for a while though - I even purchased a special brush to clean some of the more tricky bits
Just stuck one of these on the Varadero to stop the winter crud getting all over the place.It just uses the same 3 screw holes that are on the swing arms already on my bike and a drill hole on the other side - probably the easiest spanner job I have ever had to do tbh! Took about 5 minutes

I too enjoy working on the bike.I used to tinker with cars but even with something as exposed as the Westfield, they still got on my nerves in one way or another.Since getting the bike though, I have had both the wheels off and taken them to get tyres, replaced the headlamp bulbs with brighter ones, changed the oil, oil filter, air filter and plugs, removed the clocks and dismantled them so I could clean under the perspex (annoying mark on it), upgraded the chain and sprockets, changed front and rear brake fluid, changed rear brake pads, added new mirrors, adjusted the rear brake light switch, stiffened up the rear shock, added some wind deflectors and fork protectors (also fitted a top box although it's hardly ever on the bike) and generally tidied and tarted it up all round.
I don't even mind cleaning it and keeping the forks/chain/cables lubed up etc.I used to enjoy cleaning cars too, but lost all interest in that over the years, I am happy to sit and clean the bike for a while though - I even purchased a special brush to clean some of the more tricky bits

Gassing Station | Biker Banter | Top of Page | What's New | My Stuff



heh seriously though im smart (even if i do say so myself) and have been wielding spanners for a fairly long time, on cars usually. Rebuilding an engine wouldn't be overly difficult for me tbh.
