cluchless changes
Author
Discussion

steveo29

Original Poster:

1,885 posts

220 months

Saturday 4th October 2008
quotequote all
right, i have been hearing about these so called cluchless changes on bike ans wondered what they are all about.

i tryed one yesterday, but all it did was, yes it changed gear up, but it also jolted the bike forward quite a bit, now i dont know if it is ment to do that or not, or that you only do it when you are giving it some.


can someone shed some light on them??

Momentofmadness

2,371 posts

272 months

Saturday 4th October 2008
quotequote all
The jolt is probably because you have to roll off the throttle as you snick the gear before rolling back on cool

Like all new things it will require a bit of practice too wink

Edited by Momentofmadness on Saturday 4th October 17:42

steveo29

Original Poster:

1,885 posts

220 months

Saturday 4th October 2008
quotequote all
aye i dont think i let the throttle off completly.

so if i let it off totally it should be ok?

and does it damage the clutch/gearbox in any way???

Momentofmadness

2,371 posts

272 months

Saturday 4th October 2008
quotequote all
You only need to roll it off a little as you change gear then roll back on smile

Here a simple guide http://www.datacraftsystems.co.uk/techniques/techn...

Once you get a nice smooth change it won't harm the gearbox.

Steve_T

6,356 posts

303 months

Saturday 4th October 2008
quotequote all
You want a light upward pressure on the lever, so as you roll off the gas, the next gear slots home. You can then roll back on and move your foot back into it's regular riding position.

SVS

3,824 posts

302 months

Saturday 4th October 2008
quotequote all
www.datacraftsystems.co.uk/techniques/techniques_l...thumbup

That's a good web site smile

Incidentally, does anyone notice differences doing clutchless changes on different makes of bike (Ducatis, BMWs, etc)? I find it much, much easier to do clutchless changes on a Japanese four, compared to a boxer twin.

dern

14,055 posts

310 months

Saturday 4th October 2008
quotequote all
SVS said:
Incidentally, does anyone notice differences doing clutchless changes on different makes of bike (Ducatis, BMWs, etc)? I find it much, much easier to do clutchless changes on a Japanese four, compared to a boxer twin.
Yes, they were more difficult to get right on the 748.

Chilli

17,320 posts

267 months

Saturday 4th October 2008
quotequote all
Steve_T said:
You want a light upward pressure on the lever, so as you roll off the gas, the next gear slots home. You can then roll back on and move your foot back into it's regular riding position.
Agreed. General opinion is that it doesn't do any harm at all.

Hooli

32,278 posts

231 months

Saturday 4th October 2008
quotequote all
SVS said:
Incidentally, does anyone notice differences doing clutchless changes on different makes of bike (Ducatis, BMWs, etc)? I find it much, much easier to do clutchless changes on a Japanese four, compared to a boxer twin.
i have to do them on stroppy, its the only way to get 3rd on the way up the box - i think its the clunk from the drivetrain that knocks it into gear.

steveo29

Original Poster:

1,885 posts

220 months

Saturday 4th October 2008
quotequote all
cool, will try and perfect them on my bike when i get it smile

are upchanges the same as down, just give a bit of pressure on the peg and when you throttle off it will change?

Edited by steveo29 on Sunday 5th October 02:17

Pesty

42,655 posts

287 months

Saturday 4th October 2008
quotequote all
Both My Suzuki bikes did almost instant smooth clutchless gear changes.

Slight pressure under lever, minimal back off throttle and streight back on, that was it I was in the next gear.

It was smooth when going mental or just chilling. On the Honda I was not able to get on the gas as violently afterwoods as I was on the GSXRs' so it does seem to be bike dependant. the GSXRs were a dream to do it. for some reason I enjoy a good clucthless gear change

IMO its better for the box and probably engine that using the clutch

Pesty

42,655 posts

287 months

Saturday 4th October 2008
quotequote all
steveo29 said:
cool, will try and perfect them on my cbr smile

are upchanges the same as down, just give a bit of pressure on the peg and when you throttle off it will change?
no, only use clucthless going up through the gears. Clutch on way down for road use I would say because its not usualy a smooth change and O don't think it does your box a lot of good.

Edited by Pesty on Saturday 4th October 20:19

Pesty

42,655 posts

287 months

Saturday 4th October 2008
quotequote all
Momentofmadness said:
You only need to roll it off a little as you change gear then roll back on smile

Here a simple guide http://www.datacraftsystems.co.uk/techniques/techn...

Once you get a nice smooth change it won't harm the gearbox.
hmm I diagree with that. the kicking of the lever part.

Just light pressure under the lever and when you back off the gas the gyroscopic forces or whatever do the work for you. no need to kick anything.

could also go from 1st to 2nd easily on the GSXR's

untruth

2,834 posts

220 months

Saturday 4th October 2008
quotequote all
Pesty said:
steveo29 said:
cool, will try and perfect them on my cbr smile

are upchanges the same as down, just give a bit of pressure on the peg and when you throttle off it will change?
no, only use clucthless going up through the gears. Clutch on way down for road use I would say because its not usualy a smooth change and O don't think it does your box a lot of good.

Edited by Pesty on Saturday 4th October 20:19
Yip.

Clutchless down is a big no-no unless you can perfectly match the revs, which is pretty damn difficult on a bike on the road, what with all the other distractions around you.

steveo29

Original Poster:

1,885 posts

220 months

Saturday 4th October 2008
quotequote all
i kinda learnt pretty quick to rev match on the schools bike as when i was downchanging it was lerching forward as i let the clutch out, i probably was letting it out too quick but i sorted that with matching.

Steve_T

6,356 posts

303 months

Sunday 5th October 2008
quotequote all
For anyone interested, look here: http://auto.howstuffworks.com/sequential-gearbox1.... and have a look at how the dog engagement works on a proper manual sequential box (none of your flappy paddle auto boxes here!).

Biker's Nemesis

41,487 posts

239 months

Sunday 5th October 2008
quotequote all
Sorry to be a misery guts, but whats the point?


StuB

6,695 posts

270 months

Sunday 5th October 2008
quotequote all
My GSXR is a beaut to do clutchless changes, both up & down and basically, it maintains drive/engine braking to the rear, so doesn't upset the balance like a clutched change can. I always blip to match revs on the downchanges.

I think on a bike with a slipper clutch, it's pointless as there's no advantage and only a higher risk of locking the rear.

There is a massive differences between bike make and models IMO.

As said by Pesty, Suzuki gearboxes are the sweetest stock.

Biker's Nemesis

41,487 posts

239 months

Sunday 5th October 2008
quotequote all
Hi Stu.

Is there a point to doing it on the road though?

untruth

2,834 posts

220 months

Sunday 5th October 2008
quotequote all
Biker's Nemesis said:
Hi Stu.

Is there a point to doing it on the road though?
That's what he's saying, I think, there is very little. If you've got a wet clutch, finesse it correctly and you can do great changes anyway, without the risk of locking.