Buying a Bike...question.
Buying a Bike...question.
Author
Discussion

Hypermonkey

Original Poster:

273 posts

218 months

Thursday 9th October 2008
quotequote all
I'm looking at buying a Bandit 600 at the weekend and just have a couple of questions.

I've done an HPI check and all comes back sweet, engine number/chassis number both add up and it is clear of any insurance/theft issues.

Now this is a 2000 W reg and the only thing that I'm not sure about is the 5 owners. Is this the norm for bikes?

I've spoken at length to the owner who bought the bike in June this year and used it to get experience after passing his test, he now owns an R6. Should I be hearing any alarms going off?
He seams a genuine chap and the pics of the bike are great, it looks immaculate.

I'm getting it checked out by a specialist local to him so that side of things is ok, but what other things should I look? I maintain my cars, one of which is a track car so know what's what with them, but am new to bikes so any help would be appreciated.

Simon.

Buelligan 984

186 posts

234 months

Thursday 9th October 2008
quotequote all
Hypermonkey,

The number of "expected" previous owners varies a lot by the type of bike involved.

There are probaly quite a few people who pick up a Bandit 6 to gain experience for a while, then quickly move on to something else. 6 or so previous owners for an 8 year old bike might be seen as a bit steep for some models (if it was a Ducati or a Buell, I'd walk away) but in the context of the type of bike involed, its not outrageous.

The big question is - given that the previous owners are probably fairly new to bikes - have they maintained it properly? It might look shiney, but that only means it gets washed, not that it gets maintained.

Check the obvious - chain adjustment and wear; ask the owner what the tyre pressures should be (if he doesn't know without looking it up, he hasn't checked it ofeten enough) then measure the pressures to see if they are correct. Ask what the oil change interval is, then ask him how its done (if he doesn't know how to change the oil, its not a good sign). Look at pad wear, disc wear / warp, check for movement in the stearing head bearings etc. Is the pipe corroding? Etc etc.

There's lots of bikes for sale out there and its a buyer's market so don't rush in, but don't let a genuine bargain go by either.

HTH

Dave

Sossige

3,176 posts

294 months

Thursday 9th October 2008
quotequote all
Sound advice from Dave. Have a look around the place where the bike is kept and see if you can see some chain lube cans; also ask the owner how often that should be done. Also ask them what their "warm up policy" is with the engine - hopefully not 13k revs from cold hehe

Soss

Hypermonkey

Original Poster:

273 posts

218 months

Thursday 9th October 2008
quotequote all
Cheers for that info, mush appreciated.

He's got a full service history and all reciepts to go with it. I'm taking it to a specialist to have it looked over, a pre purchase check is what they call it so will have all things like brakes/chain/sprocket/suspension/engine and frame all thoroughly checked.

He's done his oil/filter changes himself and has the reciepts to back it up.

As you say it's a buyers market so if I have any doubts then I will walk away.

Cheers again

Simon.

Hyperion

16,952 posts

231 months

Thursday 9th October 2008
quotequote all
Check the usual stuff like regular oil changes...but also the less obvious like tappet check/adjustment which you're supposed to do every 10k miles.
If it's high mileage and they've never been checked - you could have problems.

Wheel bearings, swing arm bearings, headstock bearings and fork bushes should also be checked for play.

John Laverick

2,002 posts

245 months

Thursday 9th October 2008
quotequote all
With run of the mill Japanese bikes anything up to one a year [eight in your case] I would consider normal.

Hypermonkey

Original Poster:

273 posts

218 months

Thursday 9th October 2008
quotequote all
Cheers again for the info.

The bike has 16k on the clocks so I will check to see when the tappets etc were done. If they haven't been or he hasn't got the reciept to prove it was done, how much would that job be to do? Could use that as a bargaining tool, or if they haven't been done is that a walk away scenario?

Simon.

Edited by Hypermonkey on Thursday 9th October 15:12

StevRS

443 posts

240 months

Thursday 9th October 2008
quotequote all
Hypermonkey said:
The bike has 16k on the clocks so I will check to see when the tappets etc were done. If they haven't been or he hasn't got the reciept to prove it was done, how much would that job be to do?
Quite a simple job if you're not scared of the shiny innards of an engine smile

If he's paid a garage for his services then I'm sure they will have been done...

Hypermonkey

Original Poster:

273 posts

218 months

Thursday 9th October 2008
quotequote all
I've been maintaining a Mk1 Golf track car (sold today frown) so not afraid of getting my hands dirty and can follow a Haynes manual and even get the instructions to make sense wink so will invest in one, unless there is a better manual on the market?


Cheers for all the advice, not a bad little corner of PHs this place smile


I'm transporting the bike from Leeds way to Reading on Saturday (have full license but not ridden daily for 9 years) and have some training planned first as the 240ish mile journey back for a first outing would be a little too foolhardy...even for me.

Just back from HG after a spending spree...why do they have such attractive female assistants who manage to get you to spend so much and buy things you never thought you needed until they mentioned it. I must take note to make decisions with the right head next time.

Simon.

Hyperion

16,952 posts

231 months

Thursday 9th October 2008
quotequote all
Valve checking is a time consuming tricky job, which is why it's often overlooked.
Basically, you find what the gap between the cam lobe and bucket is supposed to be at a given point, and measure it with a feeler gauge. If the gap is out of spec, then you have to remove the bucket and shim and fit a new shim which takes into account the amount of wear you recorded with the feeler gauge.
You often need special tools to remove the shim and the whole task is usually reserved for very competent DIY'ers, or a dealer.
If the valves are out of spec budget for around £150-£200 to have a dealer do the work. If you DIY, the shims usually cost about a fiver each...so that could be 8x£5 for an 8v engine, and 16x£5 for a 16 valver.

Neglecting this important job will eventually lead to the valves overheating and ultimately knackering the head. If the bike you're seeing has never been done, then it needs doing now.

Hypermonkey

Original Poster:

273 posts

218 months

Thursday 9th October 2008
quotequote all
Cheers for that. I will speak to him tonight about it and if there is no reciepts to prove it's been done or log in the service book then I'll factor this in to the inspection on Saturday. The specialists said they will have to do it in the week if necessary, but let's hope the owner has the book stamped.


Simon.


Buelligan 984

186 posts

234 months

Thursday 9th October 2008
quotequote all
Hypermonkey,

Don't bother with a Haynes manual - bite the bullet and buy the original Suzuki workshop manual. May be about £50 but its absolutely specific to your model and worth it in the long run.

Just check that when you buy it, the shop doesn't charge VAT - manuals are "books" and therefore VAT exempt, but some bike shops don't seem to realise this.

Dave


Hooli

32,278 posts

231 months

Thursday 9th October 2008
quotequote all
EBAY! i've got a CD with the PDF of the offical workshop manual for my previous bike & several cars off there for about £3.

Hypermonkey

Original Poster:

273 posts

218 months

Thursday 9th October 2008
quotequote all
Taking on board your helpfull advice I spoke to Suzuki direct and got the service schedule and what should happen and when re valve clearance/fluids/plugs etc and spoke to the seller.

He got the 'original stamped service book and lots of history' out to tell me what services had happened when. It all started well with the running in service at 615 miles. next one was.......well there wasn't one! The book had one stamp in it at 615 miles...on a 16k mile bike.

I asked for the him to tell me what the reciepts said, at least if it wasn't done at a main dealer/specialist then the reciepts could account for something? Well they would have if the only they were not just from his 4 months of ownership.

I asked about the valve clearance to be informed 'do they need doing?'

I'm a little miffed to say the least as have spent time on the phone to him over the last couple of weeks, have arranged van hire to do the 500 mile round trip to collect the bike and booked it into a specialist to have it inspected pre purchase.

Why say it's got all the paperwork and is ready to go when it's an 8 year old 16k mile bike with no service historyrolleyes

Time to walk away from this one maybe whistle

Buelligan 984

186 posts

234 months

Friday 10th October 2008
quotequote all
Hypermonkey,

Sorry to hear the bad news.

There are several ways to look at this. You could consider the guy to be a w***er for saying its got all the paperwork - but maybe he didn't understand and meant that its got tax / MOT/ V5 etc.

At least the guy wasn't trying to con you by saying that the valve clearences were done - from what you have said he sounds like a genuine enough guy who simply doesn't realise what sort of looking after a bike needs. He probably thought he had a sale until you started asking difficult questions!

Its good that you posted the matter here early enough and we were able to put you in a position to ask the right questions at the right time so you were in the right position to make an informed decision. (Yes, I have bought a second hand bike that destroyed its gearbox within three miles of me collecting it!)

You now have to decide whether to write the van hire cost etc off to experience or go ahead and buy the bike anyway - you are probably in a good position to beat the guy down on the price: "you said all paperwork etc, so we'll knock off the price of a full main dealer service" (which could be £500 ish)- scare the guy with "its a buyer's market and your advert isn't accurate so you'll have to start again and admit no service history if you don't sell to me at a knockdown price."

He's already bought the R6 - bet you he did that thinking he'd sell the bandit quickly and can't afford to have cash tied up in it for too long.

Let's consider valve clearances - they are a pain in the neck to do. On a Jap 4 cylinder with shims its a thankless job and either people don't bother or they don't know about the need. I've had many Jap multi's - the last one for 12+ years. To start with I checked the clearences religiously every 6 months. After about three years of checking and finding out that none had ever changed, I went down to annual checks. Five years later, still none had moved at all. Just because they haven't been checked, don't assume they will be out to an extent that they will have caused any damage (input from bandit owners here would help - do they need regular adjustment?)

Provided there is no head damage, a reshim will cost less than a new chain sprockets and a set of tyres, and its easier to bully a seller into paying for a service than for paying for "regular wear".

Don't get totally hung up on top end stuff - did you ask the guy about his warm up schedule? Combined wheel / stearing / swing arm bearing change could cost more than a head rebuild etc etc.

The more info you can give us, the better placed we are to offer advice now.

Dave

Hypermonkey

Original Poster:

273 posts

218 months

Friday 10th October 2008
quotequote all
Hi again,

I've asked the chap about the warm-up regime and he says he follows a decent one with oil warm before use and up to temp before riding in a more spirited way. I asked regarding any other service items such as brake pads-brake fluid/oil changes/wheels-steering-swing arm bearing inspections etc and he didn't know if they had been looked at let alone replaced.

I suggested to him that his local specialist has said that they would do a clearance check with the inspection for £110 all in which I said, for peace of mind, would be great if he got done. Even if I ended up walking away he would have something to reassure the next prospective buyer. If the bike needed to have further done to it re clearances/fork fluid/bearings etc then we could look at the quote and work out a possible deal. His reply was ' well this is the price of the bike and it's staying at that!'

I then got the feeling that he may have had a few people ask about the service history and clearance inspections because his voice/manner changed and I got the distinct feeling that he was waiting for someone to see his shiny bike and not fully check everything as they just want it because it looks so good...possibly as he had?

He did appear genuine, but I'm feeling that he knows what he's got and is waiting for someone to go there led by heart and not head.

I'm checking the reg out with SUZUKI today just to see if they have any record of services/work done but it's looks like a walk away is on the cards....shame really as If it did have the inspection and all was well I would still be interested as can do the forks/brakes/bearings myself if they are needed and an agreement on price that would reflect this could be met.

As his bike is very well priced for the spec I said that if the report came back that the bike was fine and the clearances were within spec then we could look at a sale taking into account that there is no service history.

Cheers


Simon

edited to say I've not lost any money on booking the bike in/van hire (I know the chap) but this has inconvenienced not only me but potentially lost business for the hire company/specialists if they have had to turn people away.

Edited by Hypermonkey on Friday 10th October 08:33


Edited by Hypermonkey on Friday 10th October 08:34

Nimbus

1,176 posts

259 months

Friday 10th October 2008
quotequote all
I'd leave it, there are loads of other bikes out there, all just as good or better, and you're just coming into bargain season smile

Chances are, this guy has just bought the bike, ridden it for a few months, and never thought of getting it serviced etc. Treated it just like an old car..
Now he's got a bike without history, and the hassle of sorting it.
Easier allround if you both find different bikes /buyers..

If you're still after a Bandit, ( and I would, I love mine smile ), then this forum is a good place for bandit specific questions.. http://tinyurl.com/3klqyu


Hyperion

16,952 posts

231 months

Friday 10th October 2008
quotequote all
Well - it's your call then.
Just like buying a car - it's a gamble without any history. Chances are it'll be fine...you and I both know a bike wouldn't rack up 16k miles without any maintenance whatsoever...unless it's been used by a courier wink. So it's likely the history has just been lost.
I wouldn't get too hung up on the valve checks - if they've never been checked, or you have no history, then you'll need to get them checked for piece of mind. Chances are they'll still be well within tolerances anyway. My Divvy 900 has done 82'000 miles - but the valves are still within tolerances.
Of course when you come to sell the bike, you're going to have to sell it without any history - which could be a problem.

Unless the bike is very cheap, I think I'd be tempted to look around a bit more. There are plenty of well cared for bikes out there with owners who keep all their receipts in neat folders smile

RizzoTheRat

29,169 posts

223 months

Friday 10th October 2008
quotequote all
Aslo well worth finding an owners forum, there's bound to be a Bandit one out there with loads of info on what look for, common problems and plenty of people experienced at all kinds of servicing jobs