Identify this brake caliper!
Discussion
For a Friend of mine:




info I can provide:
[quote]It's apparently from a Honda but I don't know which one, I got told it's a front brake caliper but it looks like a rear caliper to me and the reason I need to find out which it is, is because I need to find another identical one for someone with no internet access.
The colour is blue hammerite cos the guy "liked it"
[/quote]
ANy idea's/ thought the PH Bikers might be able to help
info I can provide:
[quote]It's apparently from a Honda but I don't know which one, I got told it's a front brake caliper but it looks like a rear caliper to me and the reason I need to find out which it is, is because I need to find another identical one for someone with no internet access.
The colour is blue hammerite cos the guy "liked it"
[/quote]
ANy idea's/ thought the PH Bikers might be able to help
It looks to me like the bleed nipple has sheared. A common enough problem.
IIRC, Earl's do a banjo bolt with a bleed nipple built into the top of it.
Bleeding the brakes with these can be a pain, because the nipple has to be at the very top of the caliper (I used to take the caliper off the fork leg, put it over a spare brake disk and bleed it that way before fitting it back to the fork) but its a lot cheaper than a new caliper or drilling / retapping etc.
Dave
IIRC, Earl's do a banjo bolt with a bleed nipple built into the top of it.
Bleeding the brakes with these can be a pain, because the nipple has to be at the very top of the caliper (I used to take the caliper off the fork leg, put it over a spare brake disk and bleed it that way before fitting it back to the fork) but its a lot cheaper than a new caliper or drilling / retapping etc.
Dave
Maybe a little far fetched, but :
doesn´t the "3diamonds" logo cast in the caliper point in the Mitsubishi direction,
and therefore to the mitsui group, who owned/distributed Yamaha for some time ?
These single-pot brake calipers were even used on front brakes in the 70s and 80s,
together with a drum at the rear.
HTH, Benni
doesn´t the "3diamonds" logo cast in the caliper point in the Mitsubishi direction,
and therefore to the mitsui group, who owned/distributed Yamaha for some time ?
These single-pot brake calipers were even used on front brakes in the 70s and 80s,
together with a drum at the rear.
HTH, Benni
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff



