Gear Indicator
Discussion
http://www.gi-pro.net/
anyone used the above. any good if you have.
and does anyone use a gear indicator. I found I keep trying for 7th Gear sometimes.
what are the + and - on them. worth having? benefits etc...
anyone used the above. any good if you have.
and does anyone use a gear indicator. I found I keep trying for 7th Gear sometimes.
what are the + and - on them. worth having? benefits etc...
I've got one on the R1, not much to say about it really. It errr, tells you what gear you're in, sometimes has a bit of a delay when you've changed (couple of seconds tops), doesn't always realise you've gone from second to first or first to neutral when coming to a stop, but generally it's fine. Acumen I think make them too, which is what I had on the last bike, same but cheaper as it hasn't got the timing eliminator built in.
wiliferus said:
Ok, Stupid feckin question time.... Whats a " Advanced Timing Retard Eliminator" and what benefit would it have for a commuter such as myself?
some bikes, for example gsx1400s, retard the ignition timing in the lower gears to make them softer to ride. retarded timing reduces throttle response so you dont wheelie everytime you open the throttle etc.a eliminator makes the bike think its in 5th (normally) so the timing doesnt get retarded in any gear. the reason they pick 5th is it also bypasses the rev based speed limiter on some bikes.
advanced? its probably turn off & onable.
I had a Dataturd DiGi for about 6 months until it packed up one day.
No amount of reprogramming/ twiddling/ resoldering joints would get it going again so I ripped it off in disgust.
It may well work on some other bike as it goes through the correct sequence when programming, just that on the move it defaults to 'haven't got a clue' mode and tells me nothing. That's not strictly true: sometimes it decides I'm in 1st gear when I'm doing 90 in top!
No amount of reprogramming/ twiddling/ resoldering joints would get it going again so I ripped it off in disgust.
It may well work on some other bike as it goes through the correct sequence when programming, just that on the move it defaults to 'haven't got a clue' mode and tells me nothing. That's not strictly true: sometimes it decides I'm in 1st gear when I'm doing 90 in top!
Roger McLittriss said:
I had a Dataturd DiGi for about 6 months until it packed up one day.
No amount of reprogramming/ twiddling/ resoldering joints would get it going again so I ripped it off in disgust.
It may well work on some other bike as it goes through the correct sequence when programming, just that on the move it defaults to 'haven't got a clue' mode and tells me nothing. That's not strictly true: sometimes it decides I'm in 1st gear when I'm doing 90 in top!
why didnt you just take it back then?No amount of reprogramming/ twiddling/ resoldering joints would get it going again so I ripped it off in disgust.
It may well work on some other bike as it goes through the correct sequence when programming, just that on the move it defaults to 'haven't got a clue' mode and tells me nothing. That's not strictly true: sometimes it decides I'm in 1st gear when I'm doing 90 in top!
mine has been on my bike for over 6 years now and never had a problem with it
Taita said:
Call me daft, but WHY are these useful? Just look at the rev counter and see if you are in the right range for the speed?
if you have a bike that will lift the front in the first three gears it is good to know if you are in 3rd or 4th before giving it the beans 

also stops you from proding the lever on motorways when cruising at speed wondering if there is a higher gear
Edited by y2blade on Saturday 25th October 22:37
They're not exactly a new idea. I seem to recall my mate's Suzi GT750 had one and that was about a '77 model!
Certainly several of Suzuki's bikes in the 80's had them, whether it was a line of bulbs lighting up individual digits or a 7-segment red LED (Wooooo! High tech!).
On a torquey bike it is cetainly useful to be able to glance at it as, say, you exit a roundabout and power-on, to make sure you're not a gear lower than you thought and have the back end break free. Yes, a numpty aid, but a harmless one
Only I found with the Datatrash one that if you shifted quickly and didn't get the clutch back in fast enough, or did lots of throttle-blipping through the gears, the DiGi couldn't make it's mind up and showed drivel; not what you need.
Mate has an Acumen on his R1 and reports the same, ie when you need it most is when it's most likely to be telling fibs.
Certainly several of Suzuki's bikes in the 80's had them, whether it was a line of bulbs lighting up individual digits or a 7-segment red LED (Wooooo! High tech!).
On a torquey bike it is cetainly useful to be able to glance at it as, say, you exit a roundabout and power-on, to make sure you're not a gear lower than you thought and have the back end break free. Yes, a numpty aid, but a harmless one
Only I found with the Datatrash one that if you shifted quickly and didn't get the clutch back in fast enough, or did lots of throttle-blipping through the gears, the DiGi couldn't make it's mind up and showed drivel; not what you need.Mate has an Acumen on his R1 and reports the same, ie when you need it most is when it's most likely to be telling fibs.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff




)