Discussion
Hi, pretty new to the forum.
Had a few bikes now and have just bought a red and white 2006 r6 v v nice
few extras air filter akrapovic etc etc
i fancy some heated grips, do any of you have any and could reccommend me some decent ones that are easy to fit because its to cold to be fiddling around on my driveway lol
cheers
Had a few bikes now and have just bought a red and white 2006 r6 v v nice
few extras air filter akrapovic etc etci fancy some heated grips, do any of you have any and could reccommend me some decent ones that are easy to fit because its to cold to be fiddling around on my driveway lol
cheers
Hi. You might find some of the comments on previous thread useful.
http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
sprinter885 said:
Hi. You might find some of the comments on previous thread useful.
http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
thanks, search facility was not working when i posted the thread.http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
Mr Gear said:
I have Oxford heated grips fitted to my 600, and they are unobtrusive and tidy-looking. They are cheap to buy, but get someone who knows what they are doing to wire them up so they can only turn on when the ignition is on.
Although if you can't be arsed and just wire them to the battery then the new ones switch themselves off when the voltage gets down to a preset level which should leave you enough battery power to start the bike. On the one occasion I left mine on they did just that and the bike started.dern said:
Mr Gear said:
I have Oxford heated grips fitted to my 600, and they are unobtrusive and tidy-looking. They are cheap to buy, but get someone who knows what they are doing to wire them up so they can only turn on when the ignition is on.
Although if you can't be arsed and just wire them to the battery then the new ones switch themselves off when the voltage gets down to a preset level which should leave you enough battery power to start the bike. On the one occasion I left mine on they did just that and the bike started.black-k1 said:
dern said:
Mr Gear said:
I have Oxford heated grips fitted to my 600, and they are unobtrusive and tidy-looking. They are cheap to buy, but get someone who knows what they are doing to wire them up so they can only turn on when the ignition is on.
Although if you can't be arsed and just wire them to the battery then the new ones switch themselves off when the voltage gets down to a preset level which should leave you enough battery power to start the bike. On the one occasion I left mine on they did just that and the bike started.
dern said:
black-k1 said:
dern said:
Mr Gear said:
I have Oxford heated grips fitted to my 600, and they are unobtrusive and tidy-looking. They are cheap to buy, but get someone who knows what they are doing to wire them up so they can only turn on when the ignition is on.
Although if you can't be arsed and just wire them to the battery then the new ones switch themselves off when the voltage gets down to a preset level which should leave you enough battery power to start the bike. On the one occasion I left mine on they did just that and the bike started.
sprinter885 said:
I'm thinking about warm hands too -so pardon my lack of electrical know-how- do you need a specific type of relay to do that or are all the same then ?
This sort of thing would be more than fine:http://www.in-car-stuff.com/shop/relay-spco-p-59.h...
I think that heated grips are normally rated at less than 20watts each thus total current will be less than 4 amps so a 30 amp relay is total overkill.
For those that don't know, you can easily convert electrical power (watts) to current (amps). If you know the power then divide it by 12 (as bikes have a 12 volt system) to get the current so a total of 40 watts will need 40/12=3.33 amps. Likewise, if you multiply amps by 12, you get watts so 30 amps gives 30*12=3600 watts. Make sure your cables, switches, relays etc. are rated at a higher ampage than the number you get and you will be fine.
black-k1 said:
dern said:
Mr Gear said:
I have Oxford heated grips fitted to my 600, and they are unobtrusive and tidy-looking. They are cheap to buy, but get someone who knows what they are doing to wire them up so they can only turn on when the ignition is on.
Although if you can't be arsed and just wire them to the battery then the new ones switch themselves off when the voltage gets down to a preset level which should leave you enough battery power to start the bike. On the one occasion I left mine on they did just that and the bike started.kevr6 said:
Hi, pretty new to the forum.
Had a few bikes now and have just bought a red and white 2006 r6 v v nice
few extras air filter akrapovic etc etc
i fancy some heated grips, do any of you have any and could reccommend me some decent ones that are easy to fit because its to cold to be fiddling around on my driveway lol
cheers
I've got official Yamaha heated grips fitted to my 2005 R1, I use the bike all year round, 52,000 miles currently in 3.5 years and mainly commuting. You are given a years warranty with them, but they are not cheap at £250 fitted. They are thermostatically controlled and turn off with the ignition as they are wired that way. They are very good and would have them fitted to another bike when I change.Had a few bikes now and have just bought a red and white 2006 r6 v v nice
few extras air filter akrapovic etc etci fancy some heated grips, do any of you have any and could reccommend me some decent ones that are easy to fit because its to cold to be fiddling around on my driveway lol
cheers
The problem with heated grips, is that during the winter you wear thicker gloves which the heat can't penetrate. You're hands still freeze over the knuckles & finger tips and they become pointless. If you fit bar muffs however, you can wear thinner gloves, have toasty hands and no wind chill to take away the heat 

black-k1 said:
I think that heated grips are normally rated at less than 20watts each thus total current will be less than 4 amps so a 30 amp relay is total overkill.
Yeah but if you bung in a 30 amp one you've got a nice switched supply available when you decide you want to add a satnav, bike to bike radio, accessory socket, heated jacket, etc.Hyperion said:
The problem with heated grips, is that during the winter you wear thicker gloves which the heat can't penetrate. You're hands still freeze over the knuckles & finger tips and they become pointless. If you fit bar muffs however, you can wear thinner gloves, have toasty hands and no wind chill to take away the heat 
Not necessarily true that you have to wear thicker gloves with heated grips.
I wear summer waterproof gloves and thermal inner gloves and my finger tips for the last few days have been fine, the temperatures have been around 1 degree when I have left home in the morning and about 2 -3 degrees on the way home. You do not need thick gloves if you have heated grips, decent goretex waterproof summer gloves and thermal inner gloves. Believe me I have tried everything and this is the best combination.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff




