Water/methanol injection

[ViperPict]

I was wondering if anyone here has fitted a water/methanol injection system to their RT/10? If so, where do you have the tank and what volume/ dimensions is it? Jap racer folk used the washed fluid bottle - not on a Viper though!!

Secondly, the baffles for my oil breather system were removed when 1.7 roller rockers were installed on my car. This is now becoming a problem with the Paxton supercharger set up - too much oil getting thrown into the breather system. I'm installing oil catch tanks but still want to prevent the loss of too much oil. Can anyone advise as to what the baffles should look like once modified to allow 1.7 roller rockers?

Thanks in advance.

[zubair]

hi i have it on my gts best person to speak 1 and only doc.

[vetteheadracer]

These guys don't do a specific kit for the Viper but I fitted one of their kits to my Twin Turbo Corvette.

http://www.snowperformance.net/index.php

[stevieturbo]

ViperPict said:

I was wondering if anyone here has fitted a water/methanol injection system to their RT/10? If so, where do you have the tank and what volume/ dimensions is it? Jap racer folk used the washed fluid bottle - not on a Viper though!!

Secondly, the baffles for my oil breather system were removed when 1.7 roller rockers were installed on my car. This is now becoming a problem with the Paxton supercharger set up - too much oil getting thrown into the breather system. I'm installing oil catch tanks but still want to prevent the loss of too much oil. Can anyone advise as to what the baffles should look like once modified to allow 1.7 roller rockers?

Thanks in advance.

Install a proper breather/catch can setup with a return back into the sump. Zero maintenance, and no oil will be lost.

Alcohol Injection Systems makes a great kit. Well...most kits are the same really, but AIS's tank is by far the best.