Has anyone got?????

[viper paul]

A set of the late style headers and cats with pipes to back box.

Since fitting the B&B Headers and the high flow its hard to get it through the MOT and the exhaust rattles most of the time.

[bigviper]

you will have to ask rt ,paul

[V1PER]

Gave my hole OE system to Steve K....Could try calling him

[Viper]

I think Nad may have a set or 2, you really want 2000 onwards for the better headers

dont see why it should struggle through an MOT?
mine sailed through last week with a similar setup

get your cats hot first then take the reading, that will help

Edited by Viper on Wednesday 19th November 19:36

[viper paul]

Problem is I don't always get the time to heat up the cats for the MOT took it in after a 40 minute thrash.

And the B&B headers and the Roe cats are such a bad fit I get so much rattle in the sills its driving me mad.

New engine and transmission mounts have just made it worse due to the harder material and the comp coupe shifter with no insulation and the rifle like change is pretty pants as well.

[Phoenix Viper]

I have a set of tubular headers Paul and without looking the tubes down past the flexible just before the cats

PV

[viper paul]

PV can you wrap these up ready for the crimble do?????

[Phoenix Viper]

but for gawds sake remind me a day or two before cos i will only forget ok Dave

[RT/10Dave]

Phoenix Viper said:

but for gawds sake remind me a day or two before cos i will only forget ok Dave

Why do you want 'me' to remind you? Surely this is between you and Paul... I don't need to get involved as well do I?

[V1PER]

Come on Rodney keep up.........

[RT/10Dave]

Aaaaah!!!

[ViperDave]

so do i need to remind someone of something?