Roe S/C belts

[crackle]

Hi All

I'm on holiday in the State at the mo, and want to pick up a couple of belts for the viper. Doe's any body Know what the part no, or belt lenght of the serpentine belt is ?. Roe's site doesn't give this info but I know it's in the installation instrauctions for the S/C kit. Would apprecate both with and w/o A/C.

Thanks Guys.

[GTSDave]

I presume the belt will need to be longer one to incorporate the Super Charger? Probably best to give Sean a quick ring, his numbers are as follows...

[phone] and 230-5423

[GTSDave]

Link to the part on Roe Website:

http://www.roeracing.com/ProductCart/pc/viewPrd.as...

[crackle]

Thanks Dave - I just phoned Sean and got the info.
For future reference the lengths for a Gen 1 are 2235mm W/O air Con and 2345 with.

Thanks again

[1xah]

I have a couple of spare belts (numbers 4763795AB and 4763795AC)here in the UK if you need them.

Just let me know.

[Dr-Bob]

The belts are also differ in lenght depending on what lb pulley you have

[fishboy]

Dr-Bob said:

The belts are also differ in lenght depending on what lb pulley you have

thats what i thought

[crackle]

I have two different size idler pullys supplied with the kit, one for use with the 5psi S/C pully and one that can be used with either the 6.5 or 10psi pully, I don't recall the documentation mentioning different length belts - only belt numbers with & without A.C. I'm not sure if there is a difference between the Gen 1 or 2, I wouldn't have thought so.