Petrol Hose
Petrol Hose
Author
Discussion

philhoward

Original Poster:

28 posts

202 months

Wednesday 25th May 2011
quotequote all
Can anyone advise what diameter fuel hose I will need for a 500 Chimaera, and what length required to replace the whole lot.

Phil

V8NRG

854 posts

274 months

Wednesday 25th May 2011
quotequote all
Rubber pipe from tank to pump is 12mm (1/2 inch) - only need about 30cm of this.
The rest of the rubber pipe is 7mm (9/32") i bought 8m of this and had about 1m left.


Tyre Tread

10,696 posts

247 months

Wednesday 25th May 2011
quotequote all
Make sure you buy high pressure fuel hose. It should be marked as such.

philhoward

Original Poster:

28 posts

202 months

Wednesday 25th May 2011
quotequote all
I can get hold of 7.5mm id 10 bar rating. Would this be OK

Phil

Simon says

19,462 posts

252 months

Wednesday 25th May 2011
quotequote all
http://www.postalparts.co.uk/codan-fuel-hose-10-ba...wink choose branded Goodyear,Pirelli etc.

Tyre Tread

10,696 posts

247 months

Wednesday 25th May 2011
quotequote all
10 bar is 145 PSI so should be but I don't know what pressure the pump operates at.

I wouldn't skimp on the fuel hoses though.

V8NRG

854 posts

274 months

Thursday 26th May 2011
quotequote all
I got mine from car bulder solutions. They have a few different options.