No cooling fans
No cooling fans
Author
Discussion

planes49

Original Poster:

38 posts

218 months

Friday 10th June 2011
quotequote all
Hi, 94 Chim 4.0,water temp gauge reading high.Fans not appearing to cut in. Have the 2 25amp fuses for fan 1/2 and they are ok. Have tried shorting out switch on swirl tank to no avail.Any suggestions?

phillpot

17,523 posts

214 months

Friday 10th June 2011
quotequote all

Bad earth ?

sounds like time to get a meter (or at least a test lamp) and find out where you have or don't have power.

miniman

30,189 posts

293 months

Friday 10th June 2011
quotequote all
You sure you're shorting out the right otter switch? Mine is on the rad.

Harrytsg

1,264 posts

193 months

Saturday 11th June 2011
quotequote all
Check the fan connections (x2) at the radiator, they are relatively exposed and can corrode.

TJC46

2,199 posts

237 months

Saturday 11th June 2011
quotequote all
Harrytsg said:
Check the fan connections (x2) at the radiator, they are relatively exposed and can corrode.
+ one yes

tonys

1,080 posts

254 months

Saturday 11th June 2011
quotequote all
miniman said:
You sure you're shorting out the right otter switch? Mine is on the rad.
They are on the rad on later ones, earlier are on the swirl pot teacher

planes49

Original Poster:

38 posts

218 months

Wednesday 15th June 2011
quotequote all
Thanks guys, fans are now running continuously with shorted otter sw on swirl tank.Reading the bible , it seems I might need another Otter sw, perhaps lower temp cut in. Any suggestions for source part numbers? Ted

Harrytsg

1,264 posts

193 months