Supercharger fitting problem

[D00g13]

I have just started my supercharger project and have hit a snag.

How the hell do you get to the bolts that hold the PAS Pump to the block.
They seem impossible to undo.

If there is anyone out there that has fitted their own charger I would be grateful to find out how you did it

[pk500]

wicker man fitted his own might want to look him up and send him a message good luck

[Alexdaredevilz]

Removed the 3 pulley bolts, remove the bolts that are easy to get to,

Then the plate pops off revealing another 2 bolts,at the back of the inside of the bracket, then pump comes out

Then you will see 3 more bolts that attach to the pulley

[SILICONEKID340HP]

uuuummmm how much is the supercharger kit!

[666 SVT]

Everything you need here for 2k ?

http://www.douglasvalley.co.uk/item.asp?prodid=358...

[Jammy Dodger]

Not that picture again......

Gives me the fear !

[450Nick]

666 SVT said:

Everything you need here for 2k ?

http://www.douglasvalley.co.uk/item.asp?prodid=358...

Everything you need here for a bit more...!

http://www.pistonheads.com/sales/3199608.htm

[Boosted LS1]

I've got some Rotrex front mounting plates that I'm not using if anybody wants one. You'll need to weld it to a cradle that the s/c will sit in. I may have a cradle to.