How to post a picture

[k44ent]

Was wondering how to post a picture of my car on here, have just completed the brake mods and fitted the new wheels.

Thanks

[wedget]

now i think what you do is simply cut and paste ie right click on picture then paste in profle, but i could be wrong

[K44ENT]

Thanks, have updated my profile with a picture!!

[chim_girl]

If you want to post into one of the forums you'll need to find somewhere to 'host' it first. Fotango, pbase amongst others will do this FOC.

Once you've got your picture stored somewhere you need to get the url for it. Posting here is as follows -BUT REMOVE THE SPACES after the first ] bracket and before the [ second.

[pic] www.picturestorage.co.uk/pictureref.jpg [/pic]

I hope that is of some use.

[M@H]

www.pistonheads.com/gassing/topic.asp?p=2&f=24&t=21094&h=0&hw=

[chim_girl]

Or you could read the above topic!

[K44ENT]

Thanks, will give a go. Probably get the better half to do it as she is better at that sort of stuff!

[K44ENT]

Thanks, will give a go. Probably get the better half to do it as she is better at that sort of stuff!

[robertp]

Nice wheels, Adam - got any details on them?

[k44ent]

robertp said:

Nice wheels, Adam - got any details on them?

Yep, Mac R Action, 7 x 17 front with 215/45/17 Yokohama AVS Sports and 7 x 17 rear with 235/45/17 Yokohama AVS dB. Both wheels are 15mm offset.Went for a 235 rear tyre as the rims are 1/2" narrower than standard and the extra tyre witdth (235) gives a comparable footprint to the original 225's on the wider rims.

[DutchChimaera]

I want to order Team Dynamics Tornado wheels.
They're only available in 7*17 ET 38!
Is that possible??

Regards,
DutchChimaera

[k44ent]

DutchChimaera said:

I want to order Team Dynamics Tornado wheels. They're only available in 7*17 ET 38! Is that possible?? Regards, DutchChimaera

Assuming your standard wheels are 7J ET25 front and 7.5J ET 35 rear. (My car is an early one and had 33ET rear wheels)

* Front wheels will retract under the wheel arch 13mm more. (13mm less clearance from inner arch

* Rear wheel will retarct under the wheel arch 9mm more. (3mm more clearance from inner arch)

They will probably fit, I have gone the other way to make the wheels stick out more, personal choice really..

[DutchChimaera]

Thanks!

But I need to know it for sure before I order them!

[k44ent]

DutchChimaera said:

Thanks! But I need to know it for sure before I order them!

The rears will be fine, just check the front by measuring the clearance you have now between the edge of the wheel and the wishbones. Measure 13mm from the inside edge of the wheel and see if hits anything. Also depending on what size tyres you are going to fit the front wheel may hit the battery box under the arch when on lock. I am sure some people on here have fitted ET38 so you should be fine.