4.6 Timing Cover Crank Oil Seal

[debaron]

8uggered if I can get it out! Any tips? Seems like previous owner has used some sort of sealant and stuck it in there....

[Alexdaredevilz]

Tap it out?

[haircutmike]

Mine came out very easily.

They have a fairly soft outer case that you should be able to prise out without damaging the cover.

They shouldn't be stuck in!

http://www.scooterhelp.com/tips/engine/clutch.seal...

HTH.

[spend]

Some are very stiff requiring a foot on the timing cover and 2 hands on the seal puller, others just pop out....

[TVR Beaver]

Self tappers into the body of the seal... piece of wood on the case.. and a small claw hammer

Obviously take care not to mark / damage the bearings behind (if its still fitted).. and to clean it all out after... but has worked for me on a couple of motorbike problems before!!

However... if it don't work your stuffed!