drivers door panel

[cerberatony]

i am looking to remove the drivers door panel to put the cig lighter back together as it pulls out. does anyone know if there are any hidden screws and is it just a push clips like fords and such

[Harrytsg]

3 or 4 M6 nuts along the bottom of the door panel accessed by via the speaker orifice, replace with wingnuts. Mine also has 3 or 4 small screws hidden in the carpet pile below the top leather bolster.

Buy plasters, good luck.

[cerberatony]

cheers i will get the wingnuts tomorrow in readyness

[jedmate]

door panel removal4.5 Chimaera
First remove speaker.You should a 10 mm nut and large washer remove that
Then reach inside door,at arms length you should find 3 more 10 mm nuts and washers remove these best a small rachet spanner
Lift the panel to release it from door You will be able to see all connections
I had the problem with mine,easy fix though .Good luck

[phillpot]

jedmate said:

do remove these best a small rachet spanner

tie a piece of thread to it, you will drop it and you will struggle to reach it !

[cerberatony]

thanks for your advise on door card removal, still have the skin on my knuckles. also lubricated electric window mech so that is easier. also fitted wing nuts as suggested which made fitting back easy.