Window height adjuster

[taylormj4]

Can someone tell me where the window height adjuster is.
I'd read it's accessed through the top of the door but I can't see anything in there.
Which side of the glass is it on please and is it at the centre / trailing or leading edge ?
Presume it's a cross head screw or allen key screw of some kind ?
Thanks.

[BliarOut]

It's a flat head in the centre of the door. Put your fingers inside the brush strip and you should soon find it

[sheel]

If its any further help,mine is hard against the brush strip and was tricky to find,and yes flat head also

[WOO5IE]

email me and I will send you some piccies

Trev

[Mark.]

Outside of the glass, about half way along, blade to the front at about 45 degrees.

I have a photo somewhere, buggered if I can find it though.

[taylormj4]

Good descriptions guys, that should help. The screw isn't vertical then is that right ? I was looking for a screw head facing upwards in there.
That will help the window meet the roof seal at least....hopefuly.

I also need to get the door apart to see what's going on. The window seems to get stuck and won't lift if it's taken all the way down. If I push the trailing edge of the glass towards the door hinges (i.e. fowards), the motor is able to lift the window. Presume the channels or the glass holders have come adrift.

Matt

[sheel]

The screw sits at about 44 deg sloping down to the bottom door hinge, its just a stop screw on top of the motorised rack. I have spent the last 2 days trying to improve mine(scars to prove)I striped the guides and rubbers out and replace the rubbers, its a real pain to get them right and I really didn't improve it much, TVR Power keep the rubbers if you want to replace

[jev]

Slight hijack, but does anyone know if its the same on the Tamora?